[Sun Mar  4 14:21:11 2012] Detection parameters:
  Position = (247.6, 484.6) = 23 33 39.87 -52 16 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.5 +/- 6.9
  Background counts = 4.0
  Rate = 0.0002 +/- 6e-05

[Sun Mar  4 14:21:12 2012] Off-axis axis estimate = 13.99'
[Sun Mar  4 15:46:10 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:46:10 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Sun Mar  4 15:46:10 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.953
[Sun Mar  4 15:46:10 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.42"
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Mar  4 16:27:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25.csv
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Mar  4 16:27:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25.csv
[Sun Mar  4 16:27:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Mar  4 16:27:52 2012] Fit fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Mar  4 16:28:07 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.325429 pixels away
[Sun Mar  4 16:28:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 16:28:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 16:28:07 2012] Assessing source extent using major
[Sun Mar  4 16:28:07 2012] Source does appear to be extended
[Sun Mar  4 16:28:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 17:27:28 2012] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 17:27:28 2012] Initial guess for spatial extent in simple fitting = 13.42"
[Sun Mar  4 17:27:28 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.953
[Sun Mar  4 17:27:28 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.42"
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23.csv
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23.csv
[Sun Mar  4 17:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Mar  4 17:58:20 2012] Fit fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Mar  4 17:58:32 2012] Spatial fit model total counts = 62.138200, observed total counts = 62.000000
[Sun Mar  4 17:58:32 2012] Offset between fit and detection position for source 17 = 0.311960 pixels
[Sun Mar  4 17:58:32 2012] 63.421600 total counts/ 45.424100 bgd. counts: snr = 2.670355
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.311960 pixels
  Position = (247.9, 484.7) = 23 33 39.73 -52 16 10.8
  Extent = 5.7 (3.4-8.6)", rotation angle = 0
  Source counts = 18.0 +/- 8.0
  Background counts = 45.4
  Rate = 0.0002 +/- 7e-05
[Sun Mar  4 17:58:32 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 17:58:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 17:58:32 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 17:58:32 2012] Source does appear to be extended
[Sun Mar  4 17:58:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 19:03:39 2012] XMMSAS src. selection expression = ellipse(21519.583200, 42121.470800, 339.381864, 339.381864, 0.000000, X, Y)
[Sun Mar  4 19:03:39 2012] Writing source region out to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17_src.reg
[Sun Mar  4 19:03:39 2012] Extracting stamp from image fullrun_mos2_xmm0677720101_pi300-10000_cl_sm2.00.img.gz, (228, 465) - (267, 504)
[Sun Mar  4 19:03:39 2012] XMMSAS bgd. selection expression = annulus(21519.583200, 42121.470800, 565.636441, 1131.272881, X, Y)
[Sun Mar  4 19:03:39 2012] Writing fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17.gif
[Sun Mar  4 19:11:14 2012] Mean detx,y = (-8260.85, -8772.41) 
[Sun Mar  4 19:11:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 19:11:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 19:11:27 2012] Setting source spectrum file to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar  4 19:11:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Mar  4 19:14:39 2012] Not generating rmf since there are only 17 counts
[Sun Mar  4 19:14:39 2012] rmf not generated due to insufficient counts
[Sun Mar  4 19:18:01 2012] Updating aperture counts using extracted products
[Sun Mar  4 19:18:01 2012] Error reading totcts from fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Mar  4 19:18:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 19:18:02 2012] Using photon index=1.80, rate=0.000163, arf fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17.arf
[Sun Mar  4 19:18:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 19:18:02 2012] Updating source flux to 6.8e-15
[Sun Mar  4 19:18:04 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar  4 19:18:05 2012] xmm0677720101/analysis//spectral/fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete