[Sun Mar  4 14:21:09 2012] Detection parameters:
  Position = (157.8, 323.5) = 23 34 22.74 -52 27 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 9.9
  Background counts = 5.1
  Rate = 0.0006 +/- 8e-05

[Sun Mar  4 14:21:10 2012] Off-axis axis estimate = 10.36'
[Sun Mar  4 15:24:22 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:24:22 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Sun Mar  4 15:24:22 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Sun Mar  4 15:24:22 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.61"
[Sun Mar  4 15:46:10 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar  4 15:46:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5.csv
[Sun Mar  4 15:46:10 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar  4 15:46:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5.csv
[Sun Mar  4 15:46:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 15:46:10 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar  4 15:46:10 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar  4 15:46:10 2012] Fit fullrun_mos1_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Mar  4 16:28:02 2012] Spatial fit model total counts = 100.349000, observed total counts = 100.000000
[Sun Mar  4 16:28:02 2012] Offset between fit and detection position for source 4 = 0.542738 pixels
[Sun Mar  4 16:28:02 2012] 98.722400 total counts/ 44.650100 bgd. counts: snr = 8.092144
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.542738 pixels
  Position = (157.8, 324.0) = 23 34 22.74 -52 27 48.8
  Extent = 6.8 (4.2-8.8)", rotation angle = 0
  Source counts = 54.1 +/- 9.9
  Background counts = 44.7
  Rate = 0.0005 +/- 9e-05
[Sun Mar  4 16:28:02 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 16:28:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 16:28:02 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 16:28:02 2012] Source does appear to be extended
[Sun Mar  4 16:28:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 17:09:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar  4 17:09:20 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Sun Mar  4 17:09:20 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Sun Mar  4 17:09:20 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.78"
[Sun Mar  4 17:27:28 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar  4 17:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5.csv
[Sun Mar  4 17:27:28 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar  4 17:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5.csv
[Sun Mar  4 17:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:27:28 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar  4 17:27:28 2012] fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar  4 17:27:28 2012] Fit fullrun_mos1_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Mar  4 17:58:28 2012] Warning, spatial fit 5 centroid is now closest to src. 12
[Sun Mar  4 17:58:28 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 17:58:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 17:58:28 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 17:58:28 2012] Source does appear to be extended
[Sun Mar  4 17:58:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 18:57:43 2012] XMMSAS src. selection expression = ellipse(13677.961600, 28139.416640, 406.624812, 406.624812, 0.000000, X, Y)
[Sun Mar  4 18:57:43 2012] Writing source region out to fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar  4 18:57:43 2012] Extracting stamp from image fullrun_mos1_xmm0677720101_pi300-10000_cl_sm2.00.img.gz, (134, 301) - (181, 347)
[Sun Mar  4 18:57:43 2012] XMMSAS bgd. selection expression = annulus(13677.961600, 28139.416640, 677.708020, 1355.416039, X, Y)
[Sun Mar  4 18:57:43 2012] Writing fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4.gif
[Sun Mar  4 18:59:26 2012] Mean detx,y = (7381.06, 7511.21) 
[Sun Mar  4 18:59:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 18:59:35 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 18:59:36 2012] Setting source spectrum file to fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 18:59:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar  4 19:02:42 2012] Not generating rmf since there are only 54 counts
[Sun Mar  4 19:02:42 2012] rmf not generated due to insufficient counts
[Sun Mar  4 19:18:00 2012] Updating aperture counts using extracted products
[Sun Mar  4 19:18:00 2012] Error reading totcts from fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 19:18:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 19:18:00 2012] Using photon index=1.80, rate=0.000493, arf fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4.arf
[Sun Mar  4 19:18:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 19:18:00 2012] Updating source flux to 8.7e-15
[Sun Mar  4 19:18:03 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar  4 19:18:04 2012] xmm0677720101/analysis//spectral/fullrun_mos1_xmm0677720101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete