[Sun Sep  2 15:59:15 2012] Detection parameters:
  Position = (380.2, 237.1) = 2 14 3.55 -5 52 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 8.1
  Background counts = 6.5
  Rate = 0.006 +/- 0.001

[Sun Sep  2 15:59:15 2012] Off-axis axis estimate = 7.41'
[Sun Sep  2 16:38:10 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 16:38:10 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Sep  2 16:38:10 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Sun Sep  2 16:38:10 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.13"
[Sun Sep  2 16:52:30 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Sep  2 16:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5.csv
[Sun Sep  2 16:52:30 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Sep  2 16:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5.csv
[Sun Sep  2 16:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 16:52:30 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep  2 16:52:30 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep  2 16:52:30 2012] Fit fullrun_mos2_xmm0677660101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep  2 16:52:39 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.368480 pixels away
[Sun Sep  2 16:52:39 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.052107 pixels away
[Sun Sep  2 16:52:39 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 16:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 16:52:39 2012] Assessing source extent using major
[Sun Sep  2 16:52:39 2012] Source does appear to be extended
[Sun Sep  2 16:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:28:31 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:31 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Sep  2 17:28:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Sun Sep  2 17:28:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.13"
[Sun Sep  2 17:44:29 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Sep  2 17:44:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5.csv
[Sun Sep  2 17:44:29 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Sep  2 17:44:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5.csv
[Sun Sep  2 17:44:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:44:29 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Sep  2 17:44:29 2012] fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Sep  2 17:44:29 2012] Fit fullrun_mos2_xmm0677660101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Sep  2 17:44:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 38.356825 pixels away
[Sun Sep  2 17:44:37 2012] Spatial fit model total counts = 90.999600, observed total counts = 91.000000
[Sun Sep  2 17:44:37 2012] Offset between fit and detection position for source 10 = 0.210224 pixels
[Sun Sep  2 17:44:37 2012] 90.782400 total counts/ 63.779100 bgd. counts: snr = 3.381253
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.210224 pixels
  Position = (380.0, 237.0) = 2 14 3.61 -5 52 33.2
  Extent = 6.3 (4.4-9.6)", rotation angle = 0
  Source counts = 27.0 +/- 9.5
  Background counts = 63.8
  Rate = 0.002 +/- 0.0008
[Sun Sep  2 17:44:37 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:44:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:44:37 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:44:37 2012] Source does appear to be extended
[Sun Sep  2 17:44:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 18:00:43 2012] XMMSAS src. selection expression = ellipse(33011.221166, 20574.628000, 378.037211, 378.037211, 0.000000, X, Y)
[Sun Sep  2 18:00:43 2012] Writing source region out to fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10_src.reg
[Sun Sep  2 18:00:43 2012] Extracting stamp from image fullrun_mos2_xmm0677660101_pi300-10000_cl_sm2.00.img.gz, (358, 215) - (402, 259)
[Sun Sep  2 18:00:43 2012] XMMSAS bgd. selection expression = annulus(33011.221166, 20574.628000, 630.062018, 1260.124036, X, Y) && !ellipse(32573.621680, 22017.093200, 326.718409, 326.718409, 0.000000, X, Y)
[Sun Sep  2 18:00:43 2012] Writing fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10.gif
[Sun Sep  2 18:01:26 2012] Mean detx,y = (9716.60, 814.05) 
[Sun Sep  2 18:01:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 18:01:34 2012] grppha failed
[Sun Sep  2 18:01:34 2012] Setting source spectrum file to fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Sep  2 18:01:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Sep  2 18:03:00 2012] Not generating rmf since there are only 27 counts
[Sun Sep  2 18:03:00 2012] rmf not generated due to insufficient counts
[Sun Sep  2 18:03:20 2012] Updating aperture counts using extracted products
[Sun Sep  2 18:03:20 2012] Error reading totcts from fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Sep  2 18:03:20 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 18:03:22 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep  2 18:03:23 2012] xmm0677660101/analysis//spectral/fullrun_mos2_xmm0677660101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete