[Thu May 30 23:35:54 2013] Detection parameters:
  Position = (573.2, 290.4) = 2 6 47.09 -5 28 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.4 +/- 6.7
  Background counts = 4.3
  Rate = 0.0002 +/- 5e-05

[Thu May 30 23:35:54 2013] Off-axis axis estimate = 19.93'
[Fri May 31 00:43:36 2013] Using EEF radius (= 16.39 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:43:36 2013] Initial guess for spatial extent in simple fitting = 16.39"
[Fri May 31 00:43:36 2013] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.988
[Fri May 31 00:43:36 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 16.39"
[Fri May 31 01:13:51 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 31 01:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 01:13:51 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 31 01:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 01:13:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 01:13:51 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 31 01:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 31 01:13:51 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 31 01:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 31 01:13:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 01:14:10 2013] Warning, spatial fit 13 centroid is now closest to src. 12
[Fri May 31 01:14:10 2013] Vigneting correction estimate = 1.000000
[Fri May 31 01:14:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 01:14:10 2013] Assessing source extent using major
[Fri May 31 01:14:10 2013] Source does appear to be extended
[Fri May 31 01:14:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 02:49:11 2013] Using EEF radius (= 16.39 ")to estimate initial spatial extent for simple fitting
[Fri May 31 02:49:11 2013] Initial guess for spatial extent in simple fitting = 16.39"
[Fri May 31 02:49:11 2013] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.988
[Fri May 31 02:49:11 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 16.39"
[Fri May 31 03:21:59 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 31 03:21:59 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 31 03:21:59 2013] Fit fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri May 31 03:21:59 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 31 03:21:59 2013] fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 31 03:21:59 2013] Fit fullrun_mos2_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri May 31 03:22:17 2013] Spatial fit model total counts = 112.533000, observed total counts = 107.000000
[Fri May 31 03:22:17 2013] Offset between fit and detection position for source 13 = 0.448041 pixels
[Fri May 31 03:22:17 2013] 112.793600 total counts/ 94.625800 bgd. counts: snr = 1.867659
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.448041 pixels
  Position = (572.7, 290.4) = 2 6 47.23 -5 28 42.2
  Extent = 7.0 (4.1-11.3)", rotation angle = 0
  Source counts = 18.2 +/- 10.6
  Background counts = 94.6
  Rate = 0.0001 +/- 8e-05
[Fri May 31 03:22:17 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:22:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:22:17 2013] Assessing source extent using major axis lower bound
[Fri May 31 03:22:17 2013] Source does appear to be extended
[Fri May 31 03:22:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:38:15 2013] XMMSAS src. selection expression = ellipse(49780.256400, 25217.659800, 418.687342, 418.687342, 0.000000, X, Y)
[Fri May 31 05:38:15 2013] Writing source region out to fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_src.reg
[Fri May 31 05:38:15 2013] Extracting stamp from image fullrun_mos2_xmm0677650101_pi300-10000_cl_sm2.00.img.gz, (549, 266) - (595, 314)
[Fri May 31 05:38:15 2013] XMMSAS bgd. selection expression = annulus(49780.256400, 25217.659800, 697.812236, 1395.624472, X, Y)
[Fri May 31 05:38:15 2013] Writing fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13.gif
[Fri May 31 05:47:24 2013] Mean detx,y = (1281.03, -883.44) 
[Fri May 31 05:47:27 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 05:47:30 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 05:47:31 2013] Setting source spectrum file to fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 31 05:47:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 31 05:54:24 2013] Not generating rmf since there are only 18 counts
[Fri May 31 05:54:24 2013] rmf not generated due to insufficient counts
[Fri May 31 05:59:44 2013] Updating aperture counts using extracted products
[Fri May 31 05:59:44 2013] Total counts from fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 32.00
[Fri May 31 05:59:44 2013] Total counts from fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 98.00
[Fri May 31 05:59:44 2013] Got source and background scale factors 1.000000, 1.000000
[Fri May 31 05:59:44 2013] User source parameters:
  Position = (572.7, 290.4) = 2 6 47.23 -5 28 42.2
  Extent = 7.0 (4.1-11.3)", rotation angle = 0
  Source aperture counts = -66.0 +/- 6.7
  Background aperture counts = 98.0
  Rate = -0.0005 +/- 5e-05

[Fri May 31 05:59:44 2013] No arf file for this source, not re-computing flux
[Fri May 31 05:59:49 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 05:59:51 2013] xmm0677650101/analysis//spectral/fullrun_mos2_xmm0677650101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete