[Thu May 30 23:35:30 2013] Detection parameters:
  Position = (490.4, 468.5) = 2 7 11.25 -5 15 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 7.1
  Background counts = 3.5
  Rate = 0.0002 +/- 5e-05

[Thu May 30 23:35:30 2013] Off-axis axis estimate = 18.59'
[Fri May 31 00:25:17 2013] Using EEF radius (= 15.72 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:25:17 2013] Initial guess for spatial extent in simple fitting = 15.72"
[Fri May 31 00:25:17 2013] source mask rpix=3.6, npix_max = 67, mask sum = 57, frac = 0.842
[Fri May 31 00:25:17 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 15.72"
[Fri May 31 00:43:36 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11.ximg exists
[Fri May 31 00:43:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11.csv
[Fri May 31 00:43:36 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri May 31 00:43:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11.csv
[Fri May 31 00:43:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 00:43:36 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri May 31 00:43:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 31 00:43:36 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 31 00:43:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 31 00:43:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677650101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 01:14:06 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 19.747930 pixels away
[Fri May 31 01:14:06 2013] Vigneting correction estimate = 1.000000
[Fri May 31 01:14:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 01:14:06 2013] Assessing source extent using major
[Fri May 31 01:14:06 2013] Source does appear to be extended
[Fri May 31 01:14:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 02:17:29 2013] Using EEF radius (= 15.72 ")to estimate initial spatial extent for simple fitting
[Fri May 31 02:17:29 2013] Initial guess for spatial extent in simple fitting = 15.72"
[Fri May 31 02:17:29 2013] source mask rpix=3.6, npix_max = 67, mask sum = 57, frac = 0.842
[Fri May 31 02:17:29 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 15.72"
[Fri May 31 02:49:10 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 31 02:49:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10.csv
[Fri May 31 02:49:10 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 31 02:49:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10.csv
[Fri May 31 02:49:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 02:49:11 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 31 02:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 31 02:49:11 2013] fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 31 02:49:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 31 02:49:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677650101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:22:12 2013] Spatial fit model total counts = -101.868000, observed total counts = 75.000000
[Fri May 31 03:22:12 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 03:22:12 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:22:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:22:12 2013] Assessing source extent using major
[Fri May 31 03:22:12 2013] Source does appear to be extended
[Fri May 31 03:22:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 05:19:47 2013] XMMSAS src. selection expression = ellipse(42612.792175, 40710.267212, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 05:19:47 2013] Writing source region out to fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 31 05:19:47 2013] Extracting stamp from image fullrun_mos1_xmm0677650101_pi300-10000_cl_sm2.00.img.gz, (453, 431) - (528, 506)
[Fri May 31 05:19:47 2013] XMMSAS bgd. selection expression = annulus(42612.792175, 40710.267212, 1087.500000, 2175.000000, X, Y)
[Fri May 31 05:19:47 2013] Writing fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3.gif
[Fri May 31 05:25:42 2013] Mean detx,y = (-12659.10, 10584.23) 
[Fri May 31 05:25:45 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 05:26:00 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 05:26:01 2013] Setting source spectrum file to fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 31 05:26:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 31 05:38:00 2013] Not generating rmf since there are only 31 counts
[Fri May 31 05:38:00 2013] rmf not generated due to insufficient counts
[Fri May 31 05:59:38 2013] Updating aperture counts using extracted products
[Fri May 31 05:59:38 2013] Total counts from fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 52.00
[Fri May 31 05:59:38 2013] Total counts from fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 96.00
[Fri May 31 05:59:38 2013] Got source and background scale factors 814.000000, 3470.000000
[Fri May 31 05:59:38 2013] User source parameters:
  Position = (490.4, 468.5) = 2 7 11.25 -5 15 34.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.5 +/- 8.3
  Background aperture counts = 22.5
  Rate = 0.0002 +/- 6e-05

[Fri May 31 05:59:38 2013] Updating counts from extracted products
[Fri May 31 05:59:38 2013] Set source signif. to 29.48/4.75 = 6.21
[Fri May 31 05:59:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 05:59:39 2013] Using photon index=1.80, rate=0.000231, arf fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3.arf
[Fri May 31 05:59:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 05:59:39 2013] Getting flux using calc_pl_flux failed
[Fri May 31 05:59:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 05:59:49 2013] xmm0677650101/analysis//spectral/fullrun_mos1_xmm0677650101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete