[Sun Jun 24 08:54:03 2012] Detection parameters:
  Position = (132.3, 237.5) = 2 7 5.92 -5 14 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 10.4
  Background counts = 16.0
  Rate = 0.0004 +/- 8e-05

[Sun Jun 24 08:54:03 2012] Off-axis axis estimate = 12.83'
[Sun Jun 24 09:52:28 2012] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:52:28 2012] Initial guess for spatial extent in simple fitting = 12.84"
[Sun Jun 24 09:52:28 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Sun Jun 24 09:52:28 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.84"
[Sun Jun 24 10:35:08 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 24 10:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12.csv
[Sun Jun 24 10:35:08 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 24 10:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12.csv
[Sun Jun 24 10:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 10:35:08 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 24 10:35:09 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 24 10:35:09 2012] Fit fullrun_mos2_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jun 24 10:35:30 2012] Spatial fit model total counts = 117.293000, observed total counts = 117.000000
[Sun Jun 24 10:35:30 2012] Offset between fit and detection position for source 27 = 0.438246 pixels
[Sun Jun 24 10:35:30 2012] 117.375200 total counts/ 92.822600 bgd. counts: snr = 2.548418
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.438246 pixels
  Position = (132.7, 237.3) = 2 7 5.81 -5 14 25.6
  Extent = 4.4 (3.2-5.7)", rotation angle = 0
  Source counts = 24.6 +/- 10.8
  Background counts = 92.8
  Rate = 0.0002 +/- 9e-05
[Sun Jun 24 10:35:30 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:35:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:35:30 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 10:35:30 2012] Source does appear to be extended
[Sun Jun 24 10:35:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 11:51:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 11:51:02 2012] Initial guess for spatial extent in simple fitting = 4.39"
[Sun Jun 24 11:51:02 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.987
[Sun Jun 24 11:51:02 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 4.39"
[Sun Jun 24 12:21:46 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 24 12:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12.csv
[Sun Jun 24 12:21:46 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 24 12:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12.csv
[Sun Jun 24 12:21:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:21:46 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 24 12:21:46 2012] fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 24 12:21:46 2012] Fit fullrun_mos2_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun 24 12:21:59 2012] Warning, spatial fit 12 centroid is now closest to src. 24
[Sun Jun 24 12:21:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 12:21:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 12:21:59 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 12:21:59 2012] Source does appear to be extended
[Sun Jun 24 12:21:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:56:21 2012] XMMSAS src. selection expression = ellipse(11496.996400, 20596.723600, 263.519408, 263.519408, 0.000000, X, Y)
[Sun Jun 24 13:56:21 2012] Writing source region out to fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 24 13:56:21 2012] Extracting stamp from image fullrun_mos2_xmm0677640101_pi300-10000_cl_sm2.00.img.gz, (118, 222) - (148, 252)
[Sun Jun 24 13:56:21 2012] XMMSAS bgd. selection expression = annulus(11496.996400, 20596.723600, 439.199013, 878.398025, X, Y)
[Sun Jun 24 13:56:21 2012] Writing fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27.gif
[Sun Jun 24 14:00:47 2012] Mean detx,y = (-8484.32, -3364.44) 
[Sun Jun 24 14:00:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 14:01:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 14:01:01 2012] Setting source spectrum file to fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 14:01:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 24 14:14:05 2012] Not generating rmf since there are only 24 counts
[Sun Jun 24 14:14:05 2012] rmf not generated due to insufficient counts
[Sun Jun 24 14:18:13 2012] Updating aperture counts using extracted products
[Sun Jun 24 14:18:13 2012] Error reading totcts from fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 14:18:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 14:18:14 2012] Using photon index=1.80, rate=0.000214, arf fullrun_mos2_xmm0677640101_pi300-10000_pass1_cl_src27.arf
[Sun Jun 24 14:18:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 14:18:14 2012] Getting flux using calc_pl_flux failed
[Sun Jun 24 14:18:17 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting