[Sun Jun 24 08:53:36 2012] Detection parameters:
  Position = (331.6, 467.9) = 2 6 7.91 -4 57 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.9 +/- 13.9
  Background counts = 5.8
  Rate = 0.001 +/- 0.0001

[Sun Jun 24 08:53:37 2012] Off-axis axis estimate = 12.52'
[Sun Jun 24 09:30:14 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 09:30:14 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Sun Jun 24 09:30:14 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.049
[Sun Jun 24 09:30:14 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.69"
[Sun Jun 24 09:52:27 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 24 09:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 09:52:27 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 24 09:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 09:52:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 09:52:27 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 24 09:52:27 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 24 09:52:27 2012] Fit fullrun_mos1_xmm0677640101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 24 10:35:26 2012] Spatial fit model total counts = 182.999000, observed total counts = 183.000000
[Sun Jun 24 10:35:26 2012] Offset between fit and detection position for source 1 = 0.077184 pixels
[Sun Jun 24 10:35:26 2012] 181.940600 total counts/ 85.968800 bgd. counts: snr = 10.350783
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077184 pixels
  Position = (331.5, 467.8) = 2 6 7.92 -4 57 43.0
  Extent = 6.7 (5.3-8.1)", rotation angle = 0
  Source counts = 96.0 +/- 13.5
  Background counts = 86.0
  Rate = 0.0008 +/- 0.0001
[Sun Jun 24 10:35:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 10:35:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 10:35:26 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 10:35:26 2012] Source does appear to be extended
[Sun Jun 24 10:35:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 11:21:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 11:21:14 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Sun Jun 24 11:21:14 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.208
[Sun Jun 24 11:21:14 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.67"
[Sun Jun 24 11:51:01 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 24 11:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 11:51:01 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 24 11:51:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 11:51:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 11:51:01 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 24 11:51:01 2012] fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 24 11:51:01 2012] Fit fullrun_mos1_xmm0677640101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 24 12:21:56 2012] Spatial fit model total counts = 170.997000, observed total counts = 171.000000
[Sun Jun 24 12:21:56 2012] Offset between fit and detection position for source 1 = 0.057096 pixels
[Sun Jun 24 12:21:56 2012] 169.875700 total counts/ 79.402400 bgd. counts: snr = 10.153216
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057096 pixels
  Position = (331.5, 467.8) = 2 6 7.94 -4 57 43.1
  Extent = 6.2 (5.0-7.7)", rotation angle = 0
  Source counts = 90.5 +/- 13.0
  Background counts = 79.4
  Rate = 0.0008 +/- 0.0001
[Sun Jun 24 12:21:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 12:21:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 12:21:56 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 12:21:56 2012] Source does appear to be extended
[Sun Jun 24 12:21:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:44:11 2012] XMMSAS src. selection expression = ellipse(28787.992200, 40649.360400, 373.952411, 373.952411, 0.000000, X, Y)
[Sun Jun 24 13:44:11 2012] Writing source region out to fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 13:44:11 2012] Extracting stamp from image fullrun_mos1_xmm0677640101_pi300-10000_cl_sm2.00.img.gz, (310, 446) - (353, 489)
[Sun Jun 24 13:44:11 2012] XMMSAS bgd. selection expression = annulus(28787.992200, 40649.360400, 623.254018, 1246.508036, X, Y)
[Sun Jun 24 13:44:11 2012] Writing fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 13:46:55 2012] Mean detx,y = (13342.33, -4290.36) 
[Sun Jun 24 13:46:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 13:47:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 13:47:09 2012] Setting source spectrum file to fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 13:47:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 13:54:38 2012] Not generating rmf since there are only 90 counts
[Sun Jun 24 13:54:38 2012] rmf not generated due to insufficient counts
[Sun Jun 24 14:18:11 2012] Updating aperture counts using extracted products
[Sun Jun 24 14:18:11 2012] Error reading totcts from fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 14:18:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 14:18:12 2012] Using photon index=1.80, rate=0.0008, arf fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 14:18:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 14:18:12 2012] Updating source flux to 2.2e-14
[Sun Jun 24 14:18:16 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 24 14:18:17 2012] xmm0677640101/analysis//spectral/fullrun_mos1_xmm0677640101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete