[Wed Jun 12 00:41:56 2013] Detection parameters:
  Position = (349.9, 133.2) = 2 7 15.23 -4 23 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.5 +/- 6.0
  Background counts = 2.4
  Rate = 0.0002 +/- 5e-05

[Wed Jun 12 00:41:56 2013] Off-axis axis estimate = 12.55'
[Wed Jun 12 01:59:27 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:59:27 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Jun 12 01:59:27 2013] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.876
[Wed Jun 12 01:59:27 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.70"
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 12 02:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 12 02:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 02:28:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 12 02:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 12 02:28:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jun 12 02:28:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 03:06:58 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 16.854087 pixels away
[Wed Jun 12 03:06:58 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 03:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 03:06:58 2013] Assessing source extent using major
[Wed Jun 12 03:06:58 2013] Source does appear to be extended
[Wed Jun 12 03:06:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 04:08:56 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 04:08:56 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Jun 12 04:08:56 2013] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.876
[Wed Jun 12 04:08:56 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.70"
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 04:29:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 04:29:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:58:21 2013] Spatial fit model total counts = 48.305200, observed total counts = 43.000000
[Wed Jun 12 04:58:21 2013] Offset between fit and detection position for source 23 = 0.614755 pixels
[Wed Jun 12 04:58:21 2013] 49.771600 total counts/ 33.457600 bgd. counts: snr = 2.820415
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.614755 pixels
  Position = (349.3, 133.2) = 2 7 15.41 -4 23 58.9
  Extent = 6.7 (3.5-23.5)" x 4.2 (3.2-6.6)", rotation angle = 358 (297-49) degrees
  Source counts = 16.3 +/- 7.1
  Background counts = 33.5
  Rate = 0.0001 +/- 6e-05
[Wed Jun 12 04:58:21 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 04:58:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 04:58:21 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 04:58:21 2013] Source does appear to be extended
[Wed Jun 12 04:58:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.52
[Wed Jun 12 06:37:13 2013] XMMSAS src. selection expression = ellipse(30342.619780, 11536.023200, 402.402012, 250.002007, 357.722537, X, Y)
[Wed Jun 12 06:37:13 2013] Writing source region out to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_src.reg
[Wed Jun 12 06:37:13 2013] Extracting stamp from image fullrun_mos1_xmm0677610101_pi300-10000_cl_sm2.00.img.gz, (326, 110) - (372, 156)
[Wed Jun 12 06:37:13 2013] XMMSAS bgd. selection expression = annulus(30342.619780, 11536.023200, 670.670019, 1341.340039, X, Y)
[Wed Jun 12 06:37:13 2013] Writing fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23.gif
[Wed Jun 12 06:41:57 2013] Mean detx,y = (-12700.90, 8626.25) 
[Wed Jun 12 06:41:58 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 06:42:09 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 06:42:09 2013] Setting source spectrum file to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Jun 12 06:42:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Jun 12 06:44:48 2013] Not generating rmf since there are only 16 counts
[Wed Jun 12 06:44:48 2013] rmf not generated due to insufficient counts
[Wed Jun 12 07:00:38 2013] Updating aperture counts using extracted products
[Wed Jun 12 07:00:38 2013] Total counts from fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 20.00
[Wed Jun 12 07:00:38 2013] Total counts from fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 36.00
[Wed Jun 12 07:00:38 2013] Got source and background scale factors 316800.000000, 2508862.000000
[Wed Jun 12 07:00:38 2013] User source parameters:
  Position = (349.3, 133.2) = 2 7 15.41 -4 23 58.9
  Extent = 6.7 (3.5-23.5)" x 4.2 (3.2-6.6)", rotation angle = 358 (297-49) degrees
  Source aperture counts = 15.5 +/- 5.6
  Background aperture counts = 4.5
  Rate = 0.0001 +/- 5e-05

[Wed Jun 12 07:00:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 07:00:38 2013] Using photon index=1.80, rate=0.000136, arf fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23.arf
[Wed Jun 12 07:00:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 07:00:38 2013] Updating source flux to 3.7e-15
[Wed Jun 12 07:00:45 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 07:00:46 2013] xmm0677610101/analysis//spectral/fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete