[Wed Jun 12 00:41:56 2013] Detection parameters:
  Position = (338.7, 236.1) = 2 7 18.49 -4 16 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.6 +/- 7.8
  Background counts = 3.6
  Rate = 0.0003 +/- 6e-05

[Wed Jun 12 00:41:56 2013] Off-axis axis estimate = 5.38'
[Wed Jun 12 01:59:27 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:59:27 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Wed Jun 12 01:59:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.112
[Wed Jun 12 01:59:27 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.12"
[Wed Jun 12 02:28:28 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jun 12 02:28:28 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jun 12 02:28:29 2013] Fit fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 02:28:29 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 02:28:29 2013] Fit fullrun_mos1_xmm0677610101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jun 12 03:06:58 2013] Spatial fit model total counts = 64.225300, observed total counts = 63.000000
[Wed Jun 12 03:06:58 2013] Offset between fit and detection position for source 21 = 0.583289 pixels
[Wed Jun 12 03:06:58 2013] 62.873300 total counts/ 38.790100 bgd. counts: snr = 3.866818
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.583289 pixels
  Position = (338.3, 235.8) = 2 7 18.63 -4 16 32.6
  Extent = 8.9 (6.6-14.0)" x 2.3 (2.3-4.7)", rotation angle = 131 (117-143) degrees
  Source counts = 24.1 +/- 7.9
  Background counts = 38.8
  Rate = 0.0002 +/- 7e-05
[Wed Jun 12 03:06:58 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 03:06:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 03:06:58 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 03:06:58 2013] Source does appear to be extended
[Wed Jun 12 03:06:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Wed Jun 12 04:08:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 04:08:56 2013] Initial guess for spatial extent in simple fitting = 5.61"
[Wed Jun 12 04:08:56 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.250
[Wed Jun 12 04:08:56 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 5.61"
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 04:29:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 04:29:13 2013] fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 12 04:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Jun 12 04:29:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677610101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 04:58:21 2013] Warning, spatial fit 9 centroid is now closest to src. 17
[Wed Jun 12 04:58:21 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 04:58:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 04:58:21 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 04:58:21 2013] Source does appear to be extended
[Wed Jun 12 04:58:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Wed Jun 12 06:37:13 2013] XMMSAS src. selection expression = ellipse(29380.168000, 20461.807200, 532.468815, 140.221204, 130.704497, X, Y)
[Wed Jun 12 06:37:13 2013] Writing source region out to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 12 06:37:13 2013] Extracting stamp from image fullrun_mos1_xmm0677610101_pi300-10000_cl_sm2.00.img.gz, (308, 205) - (369, 266)
[Wed Jun 12 06:37:13 2013] XMMSAS bgd. selection expression = annulus(29380.168000, 20461.807200, 887.448026, 1774.896051, X, Y)
[Wed Jun 12 06:37:13 2013] Writing fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21.gif
[Wed Jun 12 06:40:06 2013] Mean detx,y = (-4928.89, 4051.26) 
[Wed Jun 12 06:40:07 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 06:40:17 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 06:40:17 2013] Setting source spectrum file to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 12 06:40:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 12 06:44:20 2013] Not generating rmf since there are only 24 counts
[Wed Jun 12 06:44:20 2013] rmf not generated due to insufficient counts
[Wed Jun 12 07:00:37 2013] Updating aperture counts using extracted products
[Wed Jun 12 07:00:37 2013] Total counts from fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 19.00
[Wed Jun 12 07:00:37 2013] Total counts from fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 134.00
[Wed Jun 12 07:00:37 2013] Got source and background scale factors 232000.000000, 6845644.000000
[Wed Jun 12 07:00:37 2013] User source parameters:
  Position = (338.3, 235.8) = 2 7 18.63 -4 16 32.6
  Extent = 8.9 (6.6-14.0)" x 2.3 (2.3-4.7)", rotation angle = 131 (117-143) degrees
  Source aperture counts = 14.5 +/- 5.4
  Background aperture counts = 4.5
  Rate = 0.0001 +/- 5e-05

[Wed Jun 12 07:00:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 07:00:38 2013] Using photon index=1.80, rate=0.0002, arf fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21.arf
[Wed Jun 12 07:00:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 07:00:38 2013] Updating source flux to 3.9e-15
[Wed Jun 12 07:00:45 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 07:00:46 2013] xmm0677610101/analysis//spectral/fullrun_mos1_xmm0677610101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete