[Sat Aug 11 06:49:03 2012] Detection parameters:
  Position = (62.0, 354.1) = 2 32 17.79 -5 44 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.0 +/- 19.3
  Background counts = 30.3
  Rate = 0.002 +/- 0.0002

[Sat Aug 11 06:49:06 2012] Off-axis axis estimate = 17.61'
[Sat Aug 11 06:58:08 2012] Using EEF radius (= 15.23 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 06:58:08 2012] Initial guess for spatial extent in simple fitting = 15.23"
[Sat Aug 11 06:58:08 2012] source mask rpix=3.5, npix_max = 64, mask sum = 50, frac = 0.781
[Sat Aug 11 06:58:08 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 15.23"
[Sat Aug 11 08:31:08 2012] fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Aug 11 08:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16.csv
[Sat Aug 11 08:31:08 2012] fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Aug 11 08:31:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16.csv
[Sat Aug 11 08:31:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 08:31:09 2012] fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Aug 11 08:31:09 2012] fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Aug 11 08:31:09 2012] Fit fullrun_pn_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Aug 11 10:12:51 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 19.147178 pixels away
[Sat Aug 11 10:12:51 2012] Spatial fit model total counts = 829.892000, observed total counts = 840.000000
[Sat Aug 11 10:12:51 2012] Offset between fit and detection position for source 18 = 0.888508 pixels
[Sat Aug 11 10:12:51 2012] Warning, changing simple spatial fit ID from 16 to 39
[Sat Aug 11 10:12:51 2012] 812.215100 total counts/ 730.610000 bgd. counts: snr = 3.019079
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.888508 pixels
  Position = (62.9, 354.1) = 2 32 17.53 -5 44 12.2
  Extent = 3.8" x 3.8", rotation angle = 0
  Source counts = 81.6 +/- 28.5
  Background counts = 730.6
  Rate = 0.0008 +/- 0.0003
[Sat Aug 11 10:12:51 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:12:51 2012] Assessing source extent using major
[Sat Aug 11 10:12:51 2012] Source does appear to be extended
[Sat Aug 11 10:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 10:13:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:13:35 2012] Initial guess for spatial extent in simple fitting = 3.84"
[Sat Aug 11 10:13:35 2012] source mask rpix=0.9, npix_max = 7, mask sum = 2, frac = 0.261
[Sat Aug 11 10:13:35 2012] Skipping simple spatial due to low active detector fraction
[Sat Aug 11 14:06:58 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:06:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:06:58 2012] Assessing source extent using major
[Sat Aug 11 14:06:58 2012] Source does appear to be extended
[Sat Aug 11 14:06:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 14:07:37 2012] XMMSAS src. selection expression = ellipse(5423.542000, 30754.678000, 230.410807, 230.410807, 0.000000, X, Y)
[Sat Aug 11 14:07:37 2012] Writing source region out to fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18_src.reg
[Sat Aug 11 14:07:37 2012] Extracting stamp from image fullrun_pn_xmm0677600101_pi300-10000_cl_sm2.00.img.gz, (50, 341) - (76, 367)
[Sat Aug 11 14:07:37 2012] XMMSAS bgd. selection expression = annulus(5423.542000, 30754.678000, 384.018011, 768.036022, X, Y) && !ellipse(4873.913696, 30014.579926, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 14:07:37 2012] Writing fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18.gif
[Sat Aug 11 14:50:23 2012] Mean detx,y = (-2763.50, 2213.51) 
[Sat Aug 11 14:50:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 14:51:15 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 14:51:15 2012] Setting source spectrum file to fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug 11 14:51:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Aug 11 17:10:35 2012] Not generating rmf since there are only 81 counts
[Sat Aug 11 17:10:35 2012] rmf not generated due to insufficient counts
[Sat Aug 11 18:46:12 2012] Updating aperture counts using extracted products
[Sat Aug 11 18:46:12 2012] Error reading totcts from fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug 11 18:46:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 18:46:15 2012] Using photon index=1.80, rate=0.000755, arf fullrun_pn_xmm0677600101_pi300-10000_pass1_cl_src18.arf
[Sat Aug 11 18:46:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 18:46:16 2012] Getting flux using calc_pl_flux failed
[Sat Aug 11 18:47:26 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting