[Sat Aug 11 06:50:23 2012] Detection parameters:
  Position = (56.7, 346.1) = 2 32 19.32 -5 44 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.1 +/- 7.5
  Background counts = 3.0
  Rate = 0.0003 +/- 6e-05

[Sat Aug 11 06:50:23 2012] Off-axis axis estimate = 17.86'
[Sat Aug 11 09:09:40 2012] Using EEF radius (= 15.36 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 09:09:40 2012] Initial guess for spatial extent in simple fitting = 15.36"
[Sat Aug 11 09:09:40 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.985
[Sat Aug 11 09:09:40 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 15.36"
[Sat Aug 11 10:12:27 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_src26.ximg exists
[Sat Aug 11 10:12:27 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Aug 11 10:12:27 2012] Fit fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat Aug 11 10:12:27 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Aug 11 10:12:27 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Aug 11 10:12:27 2012] Fit fullrun_mos2_xmm0677600101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Aug 11 10:13:08 2012] Source 31 is offset by -2.675543 and -4.077077 pixels which is larger than
2 X fitted extent = 1.859825 x 14.122759, not incorporating fit results
[Sat Aug 11 10:13:08 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 10:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 10:13:08 2012] Assessing source extent using major
[Sat Aug 11 10:13:08 2012] Source does appear to be extended
[Sat Aug 11 10:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 13:00:58 2012] Using EEF radius (= 15.36 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:00:58 2012] Initial guess for spatial extent in simple fitting = 15.36"
[Sat Aug 11 13:00:58 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.985
[Sat Aug 11 13:00:58 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 15.36"
[Sat Aug 11 14:06:38 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_src26.ximg exists
[Sat Aug 11 14:06:38 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Aug 11 14:06:38 2012] Fit fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Aug 11 14:06:38 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Aug 11 14:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Aug 11 14:06:38 2012] fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Aug 11 14:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Aug 11 14:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677600101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:07:13 2012] Source 31 is offset by -2.603543 and -3.998894 pixels which is larger than
2 X fitted extent = 1.767926 x 14.122759, not incorporating fit results
[Sat Aug 11 14:07:13 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:07:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:07:13 2012] Assessing source extent using major
[Sat Aug 11 14:07:13 2012] Source does appear to be extended
[Sat Aug 11 14:07:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:03:23 2012] XMMSAS src. selection expression = ellipse(4887.893753, 30058.308258, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 18:03:23 2012] Writing source region out to fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31_src.reg
[Sat Aug 11 18:03:23 2012] Extracting stamp from image fullrun_mos2_xmm0677600101_pi300-10000_cl_sm2.00.img.gz, (19, 309) - (94, 384)
[Sat Aug 11 18:03:23 2012] XMMSAS bgd. selection expression = annulus(4887.893753, 30058.308258, 1087.500000, 2175.000000, X, Y) && !ellipse(5369.819400, 30730.582000, 565.830416, 565.830416, 0.000000, X, Y) && !ellipse(2858.864277, 29771.352692, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 18:03:23 2012] Writing fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31.gif
[Sat Aug 11 18:20:55 2012] Mean detx,y = (-8013.78, -1263.56) 
[Sat Aug 11 18:20:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 18:21:20 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 18:21:21 2012] Setting source spectrum file to fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Aug 11 18:21:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Aug 11 18:41:36 2012] Not generating rmf since there are only 33 counts
[Sat Aug 11 18:41:36 2012] rmf not generated due to insufficient counts
[Sat Aug 11 18:46:22 2012] Updating aperture counts using extracted products
[Sat Aug 11 18:46:22 2012] Error reading totcts from fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Aug 11 18:46:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 18:46:24 2012] Using photon index=1.80, rate=0.000258, arf fullrun_mos2_xmm0677600101_pi300-10000_pass1_cl_src31.arf
[Sat Aug 11 18:46:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 18:46:24 2012] Updating source flux to 2.9e-13
[Sat Aug 11 18:46:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting