[Tue Jun 18 05:43:50 2013] Detection parameters:
  Position = (296.1, 311.8) = 22 25 57.85 -6 35 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.4 +/- 11.8
  Background counts = 26.5
  Rate = 0.01 +/- 0.002

[Tue Jun 18 05:43:50 2013] Off-axis axis estimate = 0.99'
[Tue Jun 18 05:45:53 2013] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:45:53 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Tue Jun 18 05:45:53 2013] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.857
[Tue Jun 18 05:45:53 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 6.92"
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36.csv
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36.csv
[Tue Jun 18 08:13:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 08:13:57 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Jun 18 08:13:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Jun 18 08:13:57 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Jun 18 08:13:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Jun 18 08:13:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 13:01:31 2013] Source 37 is offset by -1.370211 and 1.943525 pixels which is larger than
2 X fitted extent = 0.811770 x 6.494161, not incorporating fit results
[Tue Jun 18 13:01:31 2013] Warning, spatial fit 36 centroid is now closest to src. 35
[Tue Jun 18 13:01:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 13:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 13:01:31 2013] Assessing source extent using major
[Tue Jun 18 13:01:31 2013] Source does appear to be extended
[Tue Jun 18 13:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:01:54 2013] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 13:01:54 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Tue Jun 18 13:01:54 2013] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.857
[Tue Jun 18 13:01:54 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 6.92"
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32.csv
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32.csv
[Tue Jun 18 14:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Jun 18 14:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:53:59 2013] Source 37 is offset by -1.370211 and 1.966215 pixels which is larger than
2 X fitted extent = 6.494161 x 0.811770, not incorporating fit results
[Tue Jun 18 17:53:59 2013] Spatial fit model total counts = 477.775000, observed total counts = 356.000000
[Tue Jun 18 17:53:59 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:53:59 2013] Warning, spatial fit 32 centroid is now closest to src. 21
[Tue Jun 18 17:53:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:53:59 2013] Assessing source extent using major
[Tue Jun 18 17:53:59 2013] Source does appear to be extended
[Tue Jun 18 17:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 17:54:18 2013] XMMSAS src. selection expression = ellipse(25715.301605, 27082.418671, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 17:54:18 2013] Writing source region out to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun 18 17:54:18 2013] Extracting stamp from image fullrun_pn_xmm0677182701_pi300-10000_cl_sm2.00.img.gz, (259, 274) - (334, 349)
[Tue Jun 18 17:54:18 2013] XMMSAS bgd. selection expression = annulus(25715.301605, 27082.418671, 1087.500000, 2175.000000, X, Y) && !ellipse(27627.650000, 27156.530000, 1529.032044, 1529.032044, 0.000000, X, Y) && !ellipse(27731.728000, 28324.784000, 960.008028, 960.008028, 0.000000, X, Y) && !ellipse(27996.765625, 29431.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.821777, 29088.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.557068, 28834.294617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.175293, 28586.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.738770, 27947.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23288.952637, 27729.165222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.874756, 27360.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26700.513947, 26053.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.978516, 25456.884949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.676575, 25794.511749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.404327, 25284.507172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27883.451630, 29868.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27360.795837, 29696.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.045105, 27592.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.702820, 25858.819214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26167.224762, 25453.518372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.539764, 24932.022827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.513611, 25018.579437, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 17:54:18 2013] Writing fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37.gif
[Tue Jun 18 18:09:26 2013] Mean detx,y = (-1630.58, 471.67) 
[Tue Jun 18 18:09:28 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 18:09:53 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 18:09:53 2013] Setting source spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun 18 18:09:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun 18 19:08:01 2013] Not generating rmf since there are only 59 counts
[Tue Jun 18 19:08:01 2013] rmf not generated due to insufficient counts
[Tue Jun 18 20:20:10 2013] Updating aperture counts using extracted products
[Tue Jun 18 20:20:10 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 379.00
[Tue Jun 18 20:20:10 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_bgd.pi.gz = 430.00
[Tue Jun 18 20:20:10 2013] Got source and background scale factors 1062944.000000, 2821941.000000
[Tue Jun 18 20:20:10 2013] User source parameters:
  Position = (296.1, 311.8) = 22 25 57.85 -6 35 58.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 217.0 +/- 20.5
  Background aperture counts = 162.0
  Rate = 0.03 +/- 0.003

[Tue Jun 18 20:20:10 2013] Updating counts from extracted products
[Tue Jun 18 20:20:10 2013] Set source signif. to 217.03/12.73 = 17.05
[Tue Jun 18 20:20:11 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 20:20:11 2013] Using photon index=1.80, rate=0.028, arf fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37.arf
[Tue Jun 18 20:20:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 20:20:11 2013] Updating source flux to 1e-13
[Tue Jun 18 20:20:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 20:20:24 2013] xmm0677182701/analysis//spectral/fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete