[Tue Jun 18 05:43:50 2013] Detection parameters:
  Position = (341.5, 316.4) = 22 25 44.60 -6 35 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.2 +/- 11.9
  Background counts = 31.1
  Rate = 0.008 +/- 0.002

[Tue Jun 18 05:43:50 2013] Off-axis axis estimate = 3.38'
[Tue Jun 18 05:45:53 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:45:53 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Jun 18 05:45:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Tue Jun 18 05:45:53 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.12"
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35.csv
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35.csv
[Tue Jun 18 08:13:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 08:13:57 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jun 18 08:13:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jun 18 08:13:57 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jun 18 08:13:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jun 18 08:13:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 13:01:31 2013] Spatial fit model total counts = 695.649000, observed total counts = 541.000000
[Tue Jun 18 13:01:31 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 13:01:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 13:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 13:01:31 2013] Assessing source extent using major
[Tue Jun 18 13:01:31 2013] Source does appear to be extended
[Tue Jun 18 13:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:01:31 2013] Source is confused with source 17
[Tue Jun 18 13:01:54 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 13:01:54 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Jun 18 13:01:54 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Tue Jun 18 13:01:54 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 8.12"
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31.csv
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31.csv
[Tue Jun 18 14:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jun 18 14:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:53:59 2013] Spatial fit model total counts = 699.094000, observed total counts = 541.000000
[Tue Jun 18 17:53:59 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:53:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:53:59 2013] Assessing source extent using major
[Tue Jun 18 17:53:59 2013] Source does appear to be extended
[Tue Jun 18 17:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 17:54:18 2013] XMMSAS src. selection expression = ellipse(29663.197418, 27477.715363, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 17:54:18 2013] Writing source region out to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_src.reg
[Tue Jun 18 17:54:18 2013] Extracting stamp from image fullrun_pn_xmm0677182701_pi300-10000_cl_sm2.00.img.gz, (304, 279) - (379, 354)
[Tue Jun 18 17:54:18 2013] XMMSAS bgd. selection expression = annulus(29663.197418, 27477.715363, 1087.500000, 2175.000000, X, Y) && !ellipse(27627.650000, 27156.530000, 1529.032044, 1529.032044, 0.000000, X, Y) && !ellipse(27731.728000, 28324.784000, 960.008028, 960.008028, 0.000000, X, Y) && !ellipse(27996.765625, 29431.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.821777, 29088.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.557068, 28834.294617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.175293, 28586.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29332.351562, 27947.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.738770, 27947.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29067.684967, 27553.171295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26700.513947, 26053.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.978516, 25456.884949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.676575, 25794.511749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.404327, 25284.507172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27883.451630, 29868.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27360.795837, 29696.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.318939, 28480.294250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.539764, 24932.022827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.513611, 25018.579437, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 17:54:18 2013] Writing fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36.gif
[Tue Jun 18 18:08:51 2013] Mean detx,y = (1397.38, -1703.56) 
[Tue Jun 18 18:08:53 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 18:09:18 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 18:09:19 2013] Setting source spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Jun 18 18:09:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Jun 18 19:05:52 2013] Not generating rmf since there are only 50 counts
[Tue Jun 18 19:05:52 2013] rmf not generated due to insufficient counts
[Tue Jun 18 20:20:09 2013] Updating aperture counts using extracted products
[Tue Jun 18 20:20:09 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 392.00
[Tue Jun 18 20:20:09 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_bgd.pi.gz = 837.00
[Tue Jun 18 20:20:09 2013] Got source and background scale factors 1198370.000000, 5017771.000000
[Tue Jun 18 20:20:09 2013] User source parameters:
  Position = (341.5, 316.4) = 22 25 44.60 -6 35 41.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 192.1 +/- 20.8
  Background aperture counts = 199.9
  Rate = 0.02 +/- 0.003

[Tue Jun 18 20:20:09 2013] Updating counts from extracted products
[Tue Jun 18 20:20:09 2013] Set source signif. to 192.10/14.14 = 13.59
[Tue Jun 18 20:20:11 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 20:20:11 2013] Using photon index=1.80, rate=0.0248, arf fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36.arf
[Tue Jun 18 20:20:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 20:20:11 2013] Updating source flux to 7.1e-14
[Tue Jun 18 20:20:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 20:20:24 2013] xmm0677182701/analysis//spectral/fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete