[Tue Jun 18 05:43:49 2013] Detection parameters:
  Position = (318.2, 314.9) = 22 25 51.41 -6 35 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 700.3 +/- 33.3
  Background counts = 32.5
  Rate = 0.1 +/- 0.005

[Tue Jun 18 05:43:50 2013] Off-axis axis estimate = 1.87'
[Tue Jun 18 05:45:53 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 05:45:53 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Tue Jun 18 05:45:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Tue Jun 18 05:45:53 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.36"
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 08:13:55 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 18 08:13:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 18 08:13:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 08:13:56 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 18 08:13:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 18 08:13:56 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 18 08:13:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 18 08:13:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 13:01:31 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Tue Jun 18 13:01:31 2013] Spatial fit model total counts = 2182.980000, observed total counts = 2180.000000
[Tue Jun 18 13:01:31 2013] Offset between fit and detection position for source 1 = 1.834608 pixels
[Tue Jun 18 13:01:31 2013] Warning, changing simple spatial fit ID from 1 to 3
[Tue Jun 18 13:01:31 2013] 2259.995000 total counts/ 2002.690000 bgd. counts: snr = 5.749649
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.834608 pixels
  Position = (316.9, 313.6) = 22 25 51.78 -6 35 51.4
  Extent = 14.2 (10.5-28.4)", rotation angle = 0
  Source counts = 257.3 +/- 47.5
  Background counts = 2002.7
  Rate = 0.03 +/- 0.006
[Tue Jun 18 13:01:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 13:01:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 13:01:31 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 13:01:31 2013] Source does appear to be extended
[Tue Jun 18 13:01:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 13:01:31 2013] Source is confused with source 3
[Tue Jun 18 13:01:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 13:01:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 13:01:54 2013] Initial guess for spatial extent in simple fitting = 14.21"
[Tue Jun 18 13:01:54 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Tue Jun 18 13:01:54 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.21"
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 14:59:32 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 18 14:59:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 18 14:59:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 18 14:59:33 2013] fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 18 14:59:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 18 14:59:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677182701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:53:59 2013] Spatial fit model total counts = 5519.610000, observed total counts = 4922.000000
[Tue Jun 18 17:53:59 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:53:59 2013] Spatial fit model total counts = 1808.470000, observed total counts = 1803.000000
[Tue Jun 18 17:53:59 2013] Offset between fit and detection position for source 1 = 1.524432 pixels
[Tue Jun 18 17:53:59 2013] Warning, changing simple spatial fit ID from 1 to 3
[Tue Jun 18 17:53:59 2013] 1842.923000 total counts/ 1523.470000 bgd. counts: snr = 8.184460
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.524432 pixels
  Position = (318.1, 312.7) = 22 25 51.43 -6 35 55.4
  Extent = 19.1 (19.1-19.1)", rotation angle = 0
  Source counts = 319.5 +/- 42.9
  Background counts = 1523.5
  Rate = 0.04 +/- 0.006
[Tue Jun 18 17:53:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:53:59 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 17:53:59 2013] Source does appear to be extended
[Tue Jun 18 17:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 17:54:17 2013] XMMSAS src. selection expression = ellipse(27627.650000, 27156.530000, 1146.774033, 1146.774033, 0.000000, X, Y)
[Tue Jun 18 17:54:17 2013] Writing source region out to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 18 17:54:17 2013] Extracting stamp from image fullrun_pn_xmm0677182701_pi300-10000_cl_sm2.00.img.gz, (252, 247) - (384, 379)
[Tue Jun 18 17:54:17 2013] XMMSAS bgd. selection expression = annulus(27627.650000, 27156.530000, 1911.290055, 3822.580110, X, Y) && !ellipse(27731.728000, 28324.784000, 960.008028, 960.008028, 0.000000, X, Y) && !ellipse(27996.765625, 29431.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27379.821777, 29088.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.557068, 28834.294617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.175293, 28586.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29332.351562, 27947.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26657.738770, 27947.039581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23288.952637, 27729.165222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29067.684967, 27553.171295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.874756, 27360.134735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26700.513947, 26053.618713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.978516, 25456.884949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27175.676575, 25794.511749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.404327, 25284.507172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28167.186646, 30812.426849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27883.451630, 29868.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27360.795837, 29696.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.318939, 28480.294250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.045105, 27592.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29663.197418, 27477.715363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.301605, 27082.418671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.702820, 25858.819214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26167.224762, 25453.518372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.539764, 24932.022827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.513611, 25018.579437, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 17:54:17 2013] Writing fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1.gif
[Tue Jun 18 17:54:25 2013] Mean detx,y = (-138.33, -402.01) 
[Tue Jun 18 17:54:28 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 17:55:12 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 17:55:12 2013] Setting source spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 18 17:55:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun 18 20:20:04 2013] Updating aperture counts using extracted products
[Tue Jun 18 20:20:04 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 4256.00
[Tue Jun 18 20:20:04 2013] Total counts from fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 2345.00
[Tue Jun 18 20:20:04 2013] Got source and background scale factors 3683739.000000, 14459143.000000
[Tue Jun 18 20:20:04 2013] User source parameters:
  Position = (318.1, 312.7) = 22 25 51.43 -6 35 55.4
  Extent = 19.1 (19.1-19.1)", rotation angle = 0
  Source aperture counts = 3658.6 +/- 66.2
  Background aperture counts = 597.4
  Rate = 0.5 +/- 0.009

[Tue Jun 18 20:20:10 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 20:20:10 2013] Using photon index=1.80, rate=0.0413, arf fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1.arf
[Tue Jun 18 20:20:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 20:20:10 2013] Updating source flux to 1.1e-13
[Tue Jun 18 20:20:21 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Jun 18 20:20:21 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jun 18 20:20:24 2013] xmm0677182701/analysis//spectral/fullrun_pn_xmm0677182701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete