[Wed May 22 10:27:28 2013] Detection parameters:
  Position = (458.0, 184.5) = 22 25 10.17 -6 45 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.4 +/- 7.5
  Background counts = 4.1
  Rate = 0.003 +/- 0.0006

[Wed May 22 10:27:29 2013] Off-axis axis estimate = 14.21'
[Wed May 22 13:59:54 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Wed May 22 13:59:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 13:59:54 2013] Initial guess for spatial extent in simple fitting = 13.53"
[Wed May 22 13:59:54 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.073
[Wed May 22 13:59:54 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.53"
[Wed May 22 16:04:59 2013] fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32.ximg exists
[Wed May 22 16:04:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32.csv
[Wed May 22 16:04:59 2013] fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed May 22 16:04:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32.csv
[Wed May 22 16:04:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 16:04:59 2013] fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed May 22 16:04:59 2013] fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed May 22 16:04:59 2013] Fit fullrun_mos2_xmm0677182201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Wed May 22 16:05:07 2013] Warning, spatial fit 28 centroid is now closest to src. 23
[Wed May 22 16:05:14 2013] Warning, spatial fit 7 centroid is now closest to src. 24
[Wed May 22 16:05:21 2013] Warning, spatial fit 8 centroid is now closest to src. 16
[Wed May 22 16:05:21 2013] Warning, spatial fit 17 centroid is now closest to src. 18
[Wed May 22 16:05:21 2013] Warning, spatial fit 25 centroid is now closest to src. 24
[Wed May 22 16:05:21 2013] Spatial fit model total counts = 94.283200, observed total counts = 86.000000
[Wed May 22 16:05:21 2013] Offset between fit and detection position for source 3 = 0.428223 pixels
[Wed May 22 16:05:21 2013] 94.948800 total counts/ 80.238200 bgd. counts: snr = 1.642252
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.428223 pixels
  Position = (457.5, 184.6) = 22 25 10.30 -6 45 26.6
  Extent = 4.3 (3.4-7.1)", rotation angle = 0
  Source counts = 14.7 +/- 9.7
  Background counts = 80.2
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability