[Sat May 18 01:31:30 2013] Detection parameters:
  Position = (292.6, 259.2) = 5 38 12.06 -20 39 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.0 +/- 12.9
  Background counts = 55.9
  Rate = 0.007 +/- 0.002

[Sat May 18 01:31:31 2013] Off-axis axis estimate = 2.88'
[Sat May 18 01:33:51 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat May 18 01:33:51 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Sat May 18 01:33:51 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.891
[Sat May 18 01:33:51 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 7.87"
[Sat May 18 04:36:52 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37.ximg exists
[Sat May 18 04:36:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37.csv
[Sat May 18 04:36:52 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat May 18 04:36:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37.csv
[Sat May 18 04:36:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 04:36:53 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat May 18 04:36:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat May 18 04:36:53 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat May 18 04:36:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat May 18 04:36:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677181201_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 07:36:34 2013] Source 38 is offset by -5.497850 and -3.852728 pixels which is larger than
2 X fitted extent = 0.867968 x 0.867968, not incorporating fit results
[Sat May 18 07:36:34 2013] Spatial fit model total counts = 372461.000000, observed total counts = 779.000000
[Sat May 18 07:36:34 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 07:36:34 2013] Vigneting correction estimate = 1.000000
[Sat May 18 07:36:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 07:36:34 2013] Assessing source extent using major
[Sat May 18 07:36:34 2013] Source does appear to be extended
[Sat May 18 07:36:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 07:36:34 2013] Source is confused with source 39
[Sat May 18 07:37:06 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sat May 18 07:37:06 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Sat May 18 07:37:06 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.891
[Sat May 18 07:37:06 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.87"
[Sat May 18 09:55:41 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30.ximg exists
[Sat May 18 09:55:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30.csv
[Sat May 18 09:55:41 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat May 18 09:55:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30.csv
[Sat May 18 09:55:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 09:55:42 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat May 18 09:55:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat May 18 09:55:42 2013] fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat May 18 09:55:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat May 18 09:55:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677181201_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 11:58:54 2013] Warning, spatial fit 30 centroid is now closest to src. 39
[Sat May 18 11:58:54 2013] Source 38 is offset by -0.225643 and 0.907663 pixels which is larger than
2 X fitted extent = 0.904685 x 0.904685, not incorporating fit results
[Sat May 18 11:58:54 2013] Vigneting correction estimate = 1.000000
[Sat May 18 11:58:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 11:58:54 2013] Assessing source extent using major
[Sat May 18 11:58:54 2013] Source does appear to be extended
[Sat May 18 11:58:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 11:59:10 2013] XMMSAS src. selection expression = ellipse(25405.457031, 22497.732666, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 11:59:10 2013] Writing source region out to fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_src.reg
[Sat May 18 11:59:10 2013] Extracting stamp from image fullrun_pn_xmm0677181201_pi300-10000_cl_sm2.00.img.gz, (255, 222) - (330, 297)
[Sat May 18 11:59:10 2013] XMMSAS bgd. selection expression = annulus(25405.457031, 22497.732666, 1087.500000, 2175.000000, X, Y) && !ellipse(24910.642000, 24282.464000, 900.800026, 900.800026, 0.000000, X, Y) && !ellipse(23064.677002, 24648.680756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.299225, 24834.463776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25514.698212, 24568.382050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.059052, 24569.765320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.917572, 23889.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.513000, 25464.054600, 1082.888031, 1082.888031, 0.000000, X, Y) && !ellipse(23086.427002, 25001.327057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.848022, 24994.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26354.826477, 24838.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22863.640839, 23926.292419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.000000, 23779.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23580.769562, 23616.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24144.113678, 23420.214630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26473.208923, 23320.475800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23713.298004, 22940.360565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.308746, 22588.120483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.904419, 23253.919525, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 11:59:10 2013] Writing fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38.gif
[Sat May 18 12:14:25 2013] Mean detx,y = (-1638.58, -1843.26) 
[Sat May 18 12:14:30 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 12:14:56 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 12:14:57 2013] Setting source spectrum file to fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 18 12:14:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 18 13:13:23 2013] Not generating rmf since there are only 52 counts
[Sat May 18 13:13:23 2013] rmf not generated due to insufficient counts
[Sat May 18 14:21:54 2013] Updating aperture counts using extracted products
[Sat May 18 14:21:54 2013] Total counts from fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 577.00
[Sat May 18 14:21:54 2013] Total counts from fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_bgd.pi.gz = 988.00
[Sat May 18 14:21:54 2013] Got source and background scale factors 1059920.000000, 4111208.000000
[Sat May 18 14:21:54 2013] User source parameters:
  Position = (292.6, 259.2) = 5 38 12.06 -20 39 19.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 322.3 +/- 25.0
  Background aperture counts = 254.7
  Rate = 0.03 +/- 0.002

[Sat May 18 14:21:54 2013] Updating counts from extracted products
[Sat May 18 14:21:54 2013] Set source signif. to 322.28/15.96 = 20.19
[Sat May 18 14:21:55 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 14:21:55 2013] Using photon index=1.80, rate=0.0322, arf fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38.arf
[Sat May 18 14:21:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 14:21:55 2013] Updating source flux to 1.2e-13
[Sat May 18 14:22:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 14:22:07 2013] xmm0677181201/analysis//spectral/fullrun_pn_xmm0677181201_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete