[Tue May 28 15:37:22 2013] Detection parameters:
  Position = (337.7, 329.8) = 23 44 10.41 -4 20 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.4 +/- 18.4
  Background counts = 70.0
  Rate = 0.02 +/- 0.002

[Tue May 28 15:37:23 2013] Off-axis axis estimate = 3.64'
[Tue May 28 15:39:45 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Tue May 28 15:39:45 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Tue May 28 15:39:45 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.958
[Tue May 28 15:39:45 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.25"
[Tue May 28 19:47:08 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34.ximg exists
[Tue May 28 19:47:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34.csv
[Tue May 28 19:47:08 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue May 28 19:47:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34.csv
[Tue May 28 19:47:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 19:47:09 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue May 28 19:47:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue May 28 19:47:09 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue May 28 19:47:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue May 28 19:47:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 02:38:56 2013] Source 35 is offset by -3.659720 and 0.917392 pixels which is larger than
2 X fitted extent = 0.915605 x 0.915605, not incorporating fit results
[Wed May 29 02:38:56 2013] Source 35 is offset by 4.163774 and -1.242069 pixels which is larger than
2 X fitted extent = 0.977232 x 1.400589, not incorporating fit results
[Wed May 29 02:38:56 2013] Vigneting correction estimate = 1.000000
[Wed May 29 02:38:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 02:38:56 2013] Assessing source extent using major
[Wed May 29 02:38:56 2013] Source does appear to be extended
[Wed May 29 02:38:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 02:38:56 2013] Source is confused with source 38
[Wed May 29 02:39:55 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:39:55 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Wed May 29 02:39:55 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.958
[Wed May 29 02:39:55 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.25"
[Wed May 29 05:16:20 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24.ximg exists
[Wed May 29 05:16:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24.csv
[Wed May 29 05:16:20 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed May 29 05:16:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24.csv
[Wed May 29 05:16:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:16:22 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed May 29 05:16:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed May 29 05:16:22 2013] fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed May 29 05:16:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed May 29 05:16:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180501_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 09:47:28 2013] Source 35 is offset by -3.659720 and 0.522403 pixels which is larger than
2 X fitted extent = 0.915605 x 0.915605, not incorporating fit results
[Wed May 29 09:47:28 2013] Spatial fit model total counts = 1576.230000, observed total counts = 1275.000000
[Wed May 29 09:47:28 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 09:47:28 2013] Source 35 is offset by 1.540556 and -1.024034 pixels which is larger than
2 X fitted extent = 7.651586 x 0.956446, not incorporating fit results
[Wed May 29 09:47:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 09:47:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 09:47:28 2013] Assessing source extent using major
[Wed May 29 09:47:28 2013] Source does appear to be extended
[Wed May 29 09:47:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 09:47:57 2013] XMMSAS src. selection expression = ellipse(29328.366364, 28646.499084, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 09:47:57 2013] Writing source region out to fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_src.reg
[Wed May 29 09:47:57 2013] Extracting stamp from image fullrun_pn_xmm0677180501_pi300-10000_cl_sm2.00.img.gz, (300, 292) - (375, 367)
[Wed May 29 09:47:57 2013] XMMSAS bgd. selection expression = annulus(29328.366364, 28646.499084, 1087.500000, 2175.000000, X, Y) && !ellipse(26877.882600, 26182.131600, 1096.624032, 839.880024, 109.415600, X, Y) && !ellipse(27196.499969, 28673.476837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27991.357330, 28309.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26812.245544, 27850.409790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29038.978790, 27878.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.384827, 27428.969025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26832.375977, 27345.914398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27959.159790, 26833.238861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.032000, 26524.192000, 1083.064031, 1083.064031, 0.000000, X, Y) && !ellipse(29472.500800, 26318.619800, 640.253618, 640.253618, 0.000000, X, Y) && !ellipse(28332.998535, 26398.315857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.202698, 29096.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28469.068787, 29094.707855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27867.970154, 28945.742126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29824.793121, 28228.026642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30382.827179, 27534.182526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29627.492584, 27569.058990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.220306, 26400.208893, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 09:47:57 2013] Writing fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35.gif
[Wed May 29 09:57:18 2013] Mean detx,y = (1062.53, -2321.94) 
[Wed May 29 09:57:20 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 09:57:29 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 09:57:29 2013] Setting source spectrum file to fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 29 09:57:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed May 29 10:38:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 10:38:24 2013] rmf not generated due to insufficient counts
[Wed May 29 13:19:35 2013] Updating aperture counts using extracted products
[Wed May 29 13:19:35 2013] Total counts from fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 910.00
[Wed May 29 13:19:35 2013] Total counts from fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1075.00
[Wed May 29 13:19:35 2013] Got source and background scale factors 1066520.000000, 4136005.000000
[Wed May 29 13:19:35 2013] User source parameters:
  Position = (337.7, 329.8) = 23 44 10.41 -4 20 42.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 632.8 +/- 31.2
  Background aperture counts = 277.2
  Rate = 0.06 +/- 0.003

[Wed May 29 13:19:35 2013] Updating counts from extracted products
[Wed May 29 13:19:35 2013] Set source signif. to 632.80/16.65 = 38.01
[Wed May 29 13:19:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 13:19:40 2013] Using photon index=1.80, rate=0.0643, arf fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35.arf
[Wed May 29 13:19:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 13:19:40 2013] Updating source flux to 2.2e-13
[Wed May 29 13:20:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 13:20:04 2013] xmm0677180501/analysis//spectral/fullrun_pn_xmm0677180501_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete