[Fri May 24 10:01:29 2013] Detection parameters:
  Position = (290.1, 293.1) = 23 21 43.58 -41 55 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 19.1
  Background counts = 93.4
  Rate = 0.01 +/- 0.002

[Fri May 24 10:01:29 2013] Off-axis axis estimate = 0.72'
[Fri May 24 10:03:36 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Fri May 24 10:03:36 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Fri May 24 10:03:36 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Fri May 24 10:03:36 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 6.79"
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 24 11:21:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21.csv
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 24 11:21:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21.csv
[Fri May 24 11:21:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 24 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 24 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 24 11:21:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:51 2013] Spatial fit model total counts = 1061.150000, observed total counts = 940.000000
[Fri May 24 12:28:51 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 12:28:51 2013] Source 21 is offset by -4.650975 and 0.608586 pixels which is larger than
2 X fitted extent = 0.783522 x 6.258483, not incorporating fit results
[Fri May 24 12:28:51 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:28:51 2013] Assessing source extent using major
[Fri May 24 12:28:51 2013] Source does appear to be extended
[Fri May 24 12:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 12:29:04 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Fri May 24 12:29:04 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Fri May 24 12:29:04 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Fri May 24 12:29:04 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.79"
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21.csv
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21.csv
[Fri May 24 13:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May 24 13:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:41:08 2013] Source 21 is offset by -5.691435 and -6.600034 pixels which is larger than
2 X fitted extent = 6.241425 x 6.241425, not incorporating fit results
[Fri May 24 14:41:08 2013] Source 21 is offset by -4.650975 and 0.975000 pixels which is larger than
2 X fitted extent = 0.790570 x 6.230575, not incorporating fit results
[Fri May 24 14:41:08 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:41:08 2013] Assessing source extent using major
[Fri May 24 14:41:08 2013] Source does appear to be extended
[Fri May 24 14:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:41:21 2013] XMMSAS src. selection expression = ellipse(25188.533173, 25453.067017, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing source region out to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_src.reg
[Fri May 24 14:41:21 2013] Extracting stamp from image fullrun_pn_xmm0677180401_pi300-10000_cl_sm2.00.img.gz, (253, 256) - (328, 331)
[Fri May 24 14:41:21 2013] XMMSAS bgd. selection expression = annulus(25188.533173, 25453.067017, 1087.500000, 2175.000000, X, Y) && !ellipse(26740.648000, 28717.462000, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(26587.177700, 27429.946000, 1139.144033, 1052.240030, 123.428000, X, Y) && !ellipse(25090.915710, 28307.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.559418, 27184.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27993.263641, 26310.060028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.461090, 25462.603882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.352417, 24848.429230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.019470, 25007.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25126.530273, 24314.266541, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21.gif
[Fri May 24 14:57:58 2013] Mean detx,y = (-1522.64, 2053.26) 
[Fri May 24 14:58:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 14:58:18 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 14:58:18 2013] Setting source spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 24 14:58:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May 24 15:23:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 15:23:35 2013] rmf not generated due to insufficient counts
[Fri May 24 15:50:17 2013] Updating aperture counts using extracted products
[Fri May 24 15:50:17 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 683.00
[Fri May 24 15:50:17 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2034.00
[Fri May 24 15:50:17 2013] Got source and background scale factors 1191324.000000, 4332616.000000
[Fri May 24 15:50:17 2013] User source parameters:
  Position = (290.1, 293.1) = 23 21 43.58 -41 55 27.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.7 +/- 27.1
  Background aperture counts = 559.3
  Rate = 0.01 +/- 0.003

[Fri May 24 15:50:17 2013] Updating counts from extracted products
[Fri May 24 15:50:17 2013] Set source signif. to 123.72/23.65 = 5.23
[Fri May 24 15:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:50:19 2013] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21.arf
[Fri May 24 15:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:50:19 2013] Updating source flux to 4.2e-14
[Fri May 24 15:50:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 15:50:32 2013] xmm0677180401/analysis//spectral/fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete