[Fri May 24 10:01:29 2013] Detection parameters:
  Position = (285.7, 313.0) = 23 21 45.28 -41 53 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.2 +/- 19.0
  Background counts = 91.7
  Rate = 0.02 +/- 0.002

[Fri May 24 10:01:29 2013] Off-axis axis estimate = 1.40'
[Fri May 24 10:03:36 2013] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Fri May 24 10:03:36 2013] Initial guess for spatial extent in simple fitting = 7.13"
[Fri May 24 10:03:36 2013] source mask rpix=1.6, npix_max = 18, mask sum = 10, frac = 0.546
[Fri May 24 10:03:36 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 7.13"
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18.ximg exists
[Fri May 24 11:21:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18.csv
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri May 24 11:21:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18.csv
[Fri May 24 11:21:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri May 24 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri May 24 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May 24 11:21:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:51 2013] Source 18 is offset by -4.438145 and -3.473312 pixels which is larger than
2 X fitted extent = 1.197715 x 1.197715, not incorporating fit results
[Fri May 24 12:28:51 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:28:51 2013] Assessing source extent using major
[Fri May 24 12:28:51 2013] Source does appear to be extended
[Fri May 24 12:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 12:29:04 2013] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Fri May 24 12:29:04 2013] Initial guess for spatial extent in simple fitting = 7.13"
[Fri May 24 12:29:04 2013] source mask rpix=1.6, npix_max = 18, mask sum = 10, frac = 0.546
[Fri May 24 12:29:04 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.13"
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 24 13:46:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18.csv
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 24 13:46:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18.csv
[Fri May 24 13:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 24 13:46:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 24 13:46:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 24 13:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:41:08 2013] Source 18 is offset by 7.235304 and 5.583768 pixels which is larger than
2 X fitted extent = 6.557104 x 6.557104, not incorporating fit results
[Fri May 24 14:41:08 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:41:08 2013] Assessing source extent using major
[Fri May 24 14:41:08 2013] Source does appear to be extended
[Fri May 24 14:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:41:21 2013] XMMSAS src. selection expression = ellipse(24806.559418, 27184.817841, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing source region out to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_src.reg
[Fri May 24 14:41:21 2013] Extracting stamp from image fullrun_pn_xmm0677180401_pi300-10000_cl_sm2.00.img.gz, (248, 276) - (323, 351)
[Fri May 24 14:41:21 2013] XMMSAS bgd. selection expression = annulus(24806.559418, 27184.817841, 1087.500000, 2175.000000, X, Y) && !ellipse(26740.648000, 28717.462000, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(27344.185974, 28598.095245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26587.177700, 27429.946000, 1139.144033, 1052.240030, 123.428000, X, Y) && !ellipse(26752.075460, 30536.330000, 1285.288037, 1285.288037, 0.000000, X, Y) && !ellipse(27666.086000, 29770.416000, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(27382.545837, 29088.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.180664, 29082.975281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.915710, 28307.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.461090, 25462.603882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25188.533173, 25453.067017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.352417, 24848.429230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.019470, 25007.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25126.530273, 24314.266541, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18.gif
[Fri May 24 14:56:30 2013] Mean detx,y = (-2462.73, 531.05) 
[Fri May 24 14:56:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 14:56:54 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 14:56:55 2013] Setting source spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 24 14:56:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 24 15:23:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 15:23:05 2013] rmf not generated due to insufficient counts
[Fri May 24 15:50:16 2013] Updating aperture counts using extracted products
[Fri May 24 15:50:16 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 629.00
[Fri May 24 15:50:17 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1948.00
[Fri May 24 15:50:17 2013] Got source and background scale factors 1007404.000000, 4365255.000000
[Fri May 24 15:50:17 2013] User source parameters:
  Position = (285.7, 313.0) = 23 21 45.28 -41 53 59.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 179.4 +/- 26.1
  Background aperture counts = 449.6
  Rate = 0.02 +/- 0.003

[Fri May 24 15:50:17 2013] Updating counts from extracted products
[Fri May 24 15:50:17 2013] Set source signif. to 179.44/21.20 = 8.46
[Fri May 24 15:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:50:19 2013] Using photon index=1.80, rate=0.0201, arf fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18.arf
[Fri May 24 15:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:50:19 2013] Updating source flux to 9.4e-14
[Fri May 24 15:50:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 15:50:32 2013] xmm0677180401/analysis//spectral/fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete