[Fri May 24 10:01:29 2013] Detection parameters:
  Position = (308.4, 347.5) = 23 21 36.44 -41 51 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.0 +/- 16.9
  Background counts = 91.4
  Rate = 0.007 +/- 0.002

[Fri May 24 10:01:29 2013] Off-axis axis estimate = 3.63'
[Fri May 24 10:03:36 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri May 24 10:03:36 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Fri May 24 10:03:36 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.090
[Fri May 24 10:03:36 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.24"
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src11.ximg exists
[Fri May 24 11:21:22 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri May 24 11:21:22 2013] Fit fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri May 24 11:21:23 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 24 11:21:23 2013] Fit fullrun_pn_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri May 24 12:28:51 2013] Spatial fit model total counts = 641.447000, observed total counts = 626.000000
[Fri May 24 12:28:51 2013] Offset between fit and detection position for source 11 = 4.085302 pixels
[Fri May 24 12:28:51 2013] 616.445000 total counts/ 490.213000 bgd. counts: snr = 5.701341
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.085302 pixels
  Position = (308.1, 351.5) = 23 21 36.58 -41 51 11.2
  Extent = 16.1 (15.2-16.5)", rotation angle = 0
  Source counts = 126.2 +/- 24.8
  Background counts = 490.2
  Rate = 0.01 +/- 0.003
[Fri May 24 12:28:51 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:28:51 2013] Assessing source extent using major axis lower bound
[Fri May 24 12:28:51 2013] Source does appear to be extended
[Fri May 24 12:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 12:29:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 12:29:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 12:29:04 2013] Initial guess for spatial extent in simple fitting = 16.07"
[Fri May 24 12:29:04 2013] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.024
[Fri May 24 12:29:04 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 16.07"
[Fri May 24 13:46:33 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 24 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11.csv
[Fri May 24 13:46:33 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 24 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11.csv
[Fri May 24 13:46:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 24 13:46:34 2013] fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 24 13:46:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 24 13:46:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:41:08 2013] Warning, spatial fit 11 centroid is now closest to src. 12
[Fri May 24 14:41:08 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:41:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:41:08 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:41:08 2013] Source does appear to be extended
[Fri May 24 14:41:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:41:21 2013] XMMSAS src. selection expression = ellipse(26752.075460, 30536.330000, 963.966028, 963.966028, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing source region out to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_src.reg
[Fri May 24 14:41:21 2013] Extracting stamp from image fullrun_pn_xmm0677180401_pi300-10000_cl_sm2.00.img.gz, (253, 296) - (363, 407)
[Fri May 24 14:41:21 2013] XMMSAS bgd. selection expression = annulus(26752.075460, 30536.330000, 1606.610046, 3213.220092, X, Y) && !ellipse(26740.648000, 28717.462000, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(27344.185974, 28598.095245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26587.177700, 27429.946000, 1139.144033, 1052.240030, 123.428000, X, Y) && !ellipse(27666.086000, 29770.416000, 1261.648036, 1261.648036, 0.000000, X, Y) && !ellipse(28087.814545, 29003.765137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27382.545837, 29088.911926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.180664, 29082.975281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.915710, 28307.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.703064, 26909.671844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.559418, 27184.817841, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 14:41:21 2013] Writing fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11.gif
[Fri May 24 14:52:56 2013] Mean detx,y = (-1336.08, -3110.18) 
[Fri May 24 14:52:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 14:53:18 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 14:53:18 2013] Setting source spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 24 14:53:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 24 15:50:15 2013] Updating aperture counts using extracted products
[Fri May 24 15:50:15 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 752.00
[Fri May 24 15:50:15 2013] Total counts from fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 2771.00
[Fri May 24 15:50:15 2013] Got source and background scale factors 2557359.000000, 14140673.000000
[Fri May 24 15:50:15 2013] User source parameters:
  Position = (308.1, 351.5) = 23 21 36.58 -41 51 11.2
  Extent = 16.1 (15.2-16.5)", rotation angle = 0
  Source aperture counts = 250.9 +/- 28.4
  Background aperture counts = 501.1
  Rate = 0.03 +/- 0.003

[Fri May 24 15:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:50:19 2013] Using photon index=1.80, rate=0.0142, arf fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11.arf
[Fri May 24 15:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:50:19 2013] Updating source flux to 4.2e-14
[Fri May 24 15:50:32 2013] xmm0677180401/analysis//spectral/fullrun_pn_xmm0677180401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete