[Fri May 24 10:02:12 2013] Detection parameters:
  Position = (477.0, 420.9) = 23 20 30.90 -41 46 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 9.8
  Background counts = 9.6
  Rate = 0.004 +/- 0.0007

[Fri May 24 10:02:12 2013] Off-axis axis estimate = 15.70'
[Fri May 24 11:57:54 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Fri May 24 11:57:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 11:57:54 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Fri May 24 11:57:54 2013] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.856
[Fri May 24 11:57:54 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 14.28"
[Fri May 24 12:28:45 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14.ximg exists
[Fri May 24 12:28:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14.csv
[Fri May 24 12:28:45 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May 24 12:28:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14.csv
[Fri May 24 12:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:45 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May 24 12:28:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 24 12:28:45 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 24 12:28:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 24 12:28:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677180401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:57 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.828895 pixels away
[Fri May 24 12:28:57 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:28:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:28:57 2013] Assessing source extent using major
[Fri May 24 12:28:57 2013] Source does appear to be extended
[Fri May 24 12:28:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:13:22 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Fri May 24 14:13:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 14:13:22 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Fri May 24 14:13:22 2013] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.856
[Fri May 24 14:13:22 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 14.28"
[Fri May 24 14:41:02 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 24 14:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13.csv
[Fri May 24 14:41:02 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 24 14:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13.csv
[Fri May 24 14:41:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:41:02 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 24 14:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 24 14:41:02 2013] fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 24 14:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 24 14:41:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677180401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:41:14 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.495901 pixels away
[Fri May 24 14:41:14 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:41:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:41:14 2013] Assessing source extent using major
[Fri May 24 14:41:14 2013] Source does appear to be extended
[Fri May 24 14:41:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 15:37:17 2013] XMMSAS src. selection expression = ellipse(41447.141388, 36571.442932, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 15:37:17 2013] Writing source region out to fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_src.reg
[Fri May 24 15:37:17 2013] Extracting stamp from image fullrun_mos2_xmm0677180401_pi300-10000_cl_sm2.00.img.gz, (439, 383) - (514, 458)
[Fri May 24 15:37:17 2013] XMMSAS bgd. selection expression = annulus(41447.141388, 36571.442932, 1087.500000, 2175.000000, X, Y)
[Fri May 24 15:37:17 2013] Writing fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17.gif
[Fri May 24 15:44:09 2013] Mean detx,y = (-10658.34, 12822.10) 
[Fri May 24 15:44:10 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 15:44:24 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 15:44:24 2013] Setting source spectrum file to fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May 24 15:44:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May 24 15:49:29 2013] Not generating rmf since there are only 59 counts
[Fri May 24 15:49:29 2013] rmf not generated due to insufficient counts
[Fri May 24 15:50:23 2013] Updating aperture counts using extracted products
[Fri May 24 15:50:23 2013] Total counts from fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 87.00
[Fri May 24 15:50:24 2013] Total counts from fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 273.00
[Fri May 24 15:50:24 2013] Got source and background scale factors 819406.000000, 5376624.000000
[Fri May 24 15:50:24 2013] User source parameters:
  Position = (477.0, 420.9) = 23 20 30.90 -41 46 7.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.4 +/- 10.4
  Background aperture counts = 41.6
  Rate = 0.003 +/- 0.0007

[Fri May 24 15:50:24 2013] Updating counts from extracted products
[Fri May 24 15:50:24 2013] Set source signif. to 45.39/6.45 = 7.04
[Fri May 24 15:50:24 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:50:24 2013] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17.arf
[Fri May 24 15:50:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:50:24 2013] Updating source flux to 1.5e-13
[Fri May 24 15:50:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 15:50:28 2013] xmm0677180401/analysis//spectral/fullrun_mos2_xmm0677180401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete