[Mon Jun 10 16:18:45 2013] Detection parameters:
  Position = (398.2, 278.9) = 22 5 16.95 -5 38 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 13.0
  Background counts = 35.7
  Rate = 0.007 +/- 0.001

[Mon Jun 10 16:18:46 2013] Off-axis axis estimate = 7.37'
[Mon Jun 10 17:03:08 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 17:03:08 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Jun 10 17:03:08 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128
[Mon Jun 10 17:03:08 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.11"
[Mon Jun 10 17:19:40 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 10 17:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 17:19:40 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 10 17:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 17:19:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 17:19:40 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 10 17:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 10 17:19:40 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 10 17:19:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon Jun 10 17:19:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675472301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 17:43:01 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.168277 pixels away
[Mon Jun 10 17:43:01 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 17:43:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 17:43:01 2013] Assessing source extent using major
[Mon Jun 10 17:43:01 2013] Source does appear to be extended
[Mon Jun 10 17:43:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:21:11 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:21:11 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Mon Jun 10 18:21:11 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128
[Mon Jun 10 18:21:11 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.11"
[Mon Jun 10 18:35:00 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 10 18:35:00 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 10 18:35:00 2013] Fit fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon Jun 10 18:35:00 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 10 18:35:00 2013] fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 10 18:35:00 2013] Fit fullrun_mos1_xmm0675472301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 10 18:54:28 2013] Spatial fit model total counts = 192.459000, observed total counts = 201.000000
[Mon Jun 10 18:54:28 2013] Offset between fit and detection position for source 10 = 0.095579 pixels
[Mon Jun 10 18:54:28 2013] 184.158300 total counts/ 129.957000 bgd. counts: snr = 4.754555
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.095579 pixels
  Position = (398.1, 278.8) = 22 5 16.96 -5 38 6.2
  Extent = 5.7 (2.7-7.6)", rotation angle = 0
  Source counts = 54.2 +/- 13.6
  Background counts = 130.0
  Rate = 0.005 +/- 0.001
[Mon Jun 10 18:54:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:54:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:54:28 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 18:54:28 2013] Source does appear to be extended
[Mon Jun 10 18:54:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:23:37 2013] XMMSAS src. selection expression = ellipse(34587.958460, 24204.906760, 339.486010, 339.486010, 0.000000, X, Y)
[Mon Jun 10 19:23:37 2013] Writing source region out to fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 10 19:23:37 2013] Extracting stamp from image fullrun_mos1_xmm0675472301_pi300-10000_cl_sm2.00.img.gz, (379, 259) - (418, 298)
[Mon Jun 10 19:23:37 2013] XMMSAS bgd. selection expression = annulus(34587.958460, 24204.906760, 565.810016, 1131.620033, X, Y)
[Mon Jun 10 19:23:37 2013] Writing fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10.gif
[Mon Jun 10 19:26:23 2013] Mean detx,y = (-213.61, 7397.65) 
[Mon Jun 10 19:26:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 19:26:36 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 19:26:36 2013] Setting source spectrum file to fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 10 19:26:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jun 10 19:31:04 2013] Not generating rmf since there are only 54 counts
[Mon Jun 10 19:31:04 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:38:56 2013] Updating aperture counts using extracted products
[Mon Jun 10 19:38:56 2013] Total counts from fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 80.00
[Mon Jun 10 19:38:56 2013] Total counts from fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 243.00
[Mon Jun 10 19:38:56 2013] Got source and background scale factors 361600.000000, 2473963.000000
[Mon Jun 10 19:38:56 2013] User source parameters:
  Position = (398.1, 278.8) = 22 5 16.96 -5 38 6.2
  Extent = 5.7 (2.7-7.6)", rotation angle = 0
  Source aperture counts = 44.5 +/- 10.0
  Background aperture counts = 35.5
  Rate = 0.004 +/- 0.0008

[Mon Jun 10 19:38:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 19:38:56 2013] Using photon index=1.80, rate=0.00452, arf fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10.arf
[Mon Jun 10 19:38:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 19:38:56 2013] Updating source flux to 7.3e-14
[Mon Jun 10 19:38:59 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 19:39:00 2013] xmm0675472301/analysis//spectral/fullrun_mos1_xmm0675472301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete