[Mon May 6 20:10:37 2013] Detection parameters: Position = (340.8, 298.1) = 21 46 10.21 -57 17 57.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 166.7 +/- 20.8 Background counts = 63.1 Rate = 0.02 +/- 0.002 [Mon May 6 20:10:38 2013] Off-axis axis estimate = 3.07' [Mon May 6 20:12:09 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Mon May 6 20:12:09 2013] Initial guess for spatial extent in simple fitting = 7.96" [Mon May 6 20:12:09 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Mon May 6 20:12:09 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 7.96" [Mon May 6 22:11:10 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38.ximg exists [Mon May 6 22:11:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38.csv [Mon May 6 22:11:10 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38_1.ximg exists [Mon May 6 22:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38.csv [Mon May 6 22:11:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 22:11:11 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists [Mon May 6 22:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38.csv [Mon May 6 22:11:12 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists [Mon May 6 22:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38.csv [Mon May 6 22:11:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 00:05:11 2013] Source 38 is offset by -2.507206 and -4.135624 pixels which is larger than 2 X fitted extent = 0.965582 x 0.965582, not incorporating fit results [Tue May 7 00:05:11 2013] Spatial fit model total counts = 1912.150000, observed total counts = 1605.000000 [Tue May 7 00:05:11 2013] Poor agreement between spatial fit and data for source 38 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 00:05:11 2013] Vigneting correction estimate = 1.000000 [Tue May 7 00:05:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 00:05:11 2013] Assessing source extent using major [Tue May 7 00:05:11 2013] Source does appear to be extended [Tue May 7 00:05:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 00:05:27 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Tue May 7 00:05:27 2013] Initial guess for spatial extent in simple fitting = 7.96" [Tue May 7 00:05:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Tue May 7 00:05:27 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.96" [Tue May 7 01:42:45 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28.ximg exists [Tue May 7 01:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28.csv [Tue May 7 01:42:45 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28_1.ximg exists [Tue May 7 01:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28.csv [Tue May 7 01:42:45 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 01:42:46 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Tue May 7 01:42:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28.csv [Tue May 7 01:42:46 2013] fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Tue May 7 01:42:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28.csv [Tue May 7 01:42:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675472101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 03:54:11 2013] Source 38 is offset by -2.507206 and -4.135624 pixels which is larger than 2 X fitted extent = 0.965582 x 0.965582, not incorporating fit results [Tue May 7 03:54:11 2013] Spatial fit model total counts = 1829.750000, observed total counts = 1605.000000 [Tue May 7 03:54:11 2013] Poor agreement between spatial fit and data for source 38 It may help to tweak spatial fit manually Not incorporating fit results [Tue May 7 03:54:11 2013] Vigneting correction estimate = 1.000000 [Tue May 7 03:54:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 03:54:11 2013] Assessing source extent using major [Tue May 7 03:54:11 2013] Source does appear to be extended [Tue May 7 03:54:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 03:54:11 2013] Source is confused with source 49 [Tue May 7 03:54:31 2013] XMMSAS src. selection expression = ellipse(29598.327087, 25889.654724, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 03:54:31 2013] Writing source region out to fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_src.reg [Tue May 7 03:54:31 2013] Extracting stamp from image fullrun_pn_xmm0675472101_pi300-10000_cl_sm2.00.img.gz, (303, 261) - (378, 336) [Tue May 7 03:54:31 2013] XMMSAS bgd. selection expression = annulus(29598.327087, 25889.654724, 1087.500000, 2175.000000, X, Y) && !ellipse(27556.666400, 26785.859000, 1154.856033, 933.360027, 0.385836, X, Y) && !ellipse(29259.569244, 27127.402832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.599487, 28474.264679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27445.531097, 28424.947510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30258.866516, 28035.178589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28962.357300, 28059.020752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28019.033356, 28136.183868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.275696, 27495.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30557.140472, 26840.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29860.975861, 26789.348572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26434.906000, 25843.444000, 2194.464063, 2194.464063, 0.000000, X, Y) && !ellipse(28364.020600, 24756.932000, 2437.848070, 2437.848070, 0.000000, X, Y) && !ellipse(28382.587000, 24581.020000, 1200.960035, 1200.960035, 0.000000, X, Y) && !ellipse(27575.600983, 24321.936920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28605.326000, 23683.478000, 1222.624035, 1222.624035, 0.000000, X, Y) && !ellipse(26916.787323, 24404.282654, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 7 03:54:31 2013] Writing fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38.gif [Tue May 7 04:09:47 2013] Mean detx,y = (1894.06, -504.46) [Tue May 7 04:09:50 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 04:10:13 2013] Binned source spectrum to 10 counts/bin [Tue May 7 04:10:13 2013] Setting source spectrum file to fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_src_b10.pi.gz [Tue May 7 04:10:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_bgd.pi.gz [Tue May 7 05:13:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue May 7 05:13:29 2013] rmf not generated due to insufficient counts [Tue May 7 09:04:26 2013] Updating aperture counts using extracted products [Tue May 7 09:04:26 2013] Total counts from fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 1036.00 [Tue May 7 09:04:26 2013] Total counts from fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 329.00 [Tue May 7 09:04:26 2013] Got source and background scale factors 1171442.000000, 1164657.000000 [Tue May 7 09:04:26 2013] User source parameters: Position = (340.8, 298.1) = 21 46 10.21 -57 17 57.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 705.1 +/- 33.2 Background aperture counts = 330.9 Rate = 0.06 +/- 0.003 [Tue May 7 09:04:26 2013] Updating counts from extracted products [Tue May 7 09:04:26 2013] Set source signif. to 705.08/18.19 = 38.76 [Tue May 7 09:04:28 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 09:04:28 2013] Using photon index=1.80, rate=0.0563, arf fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38.arf [Tue May 7 09:04:28 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 09:04:28 2013] Updating source flux to 1.5e-13 [Tue May 7 09:04:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 7 09:04:44 2013] xmm0675472101/analysis//spectral/fullrun_pn_xmm0675472101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete