[Mon May  6 20:11:11 2013] Detection parameters:
  Position = (334.2, 209.3) = 21 46 13.67 -57 24 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.1 +/- 6.9
  Background counts = 6.1
  Rate = 0.003 +/- 0.0007

[Mon May  6 20:11:12 2013] Off-axis axis estimate = 6.96'
[Mon May  6 22:48:41 2013] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Mon May  6 22:48:41 2013] Initial guess for spatial extent in simple fitting = 9.91"
[Mon May  6 22:48:41 2013] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.907
[Mon May  6 22:48:41 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.91"
[Tue May  7 00:05:01 2013] fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37.ximg exists
[Tue May  7 00:05:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37.csv
[Tue May  7 00:05:01 2013] fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue May  7 00:05:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37.csv
[Tue May  7 00:05:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:05:02 2013] fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue May  7 00:05:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue May  7 00:05:02 2013] fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue May  7 00:05:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue May  7 00:05:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675472101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:05:18 2013] Source 24 is offset by -1.487923 and -7.167149 pixels which is larger than
2 X fitted extent = 1.139145 x 1.139145, not incorporating fit results
[Tue May  7 00:05:18 2013] Vigneting correction estimate = 1.000000
[Tue May  7 00:05:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 00:05:18 2013] Assessing source extent using major
[Tue May  7 00:05:18 2013] Source does appear to be extended
[Tue May  7 00:05:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 00:05:18 2013] Deleting source due to low Poisson probability 0.9