[Sun Jul 29 17:11:08 2012] Detection parameters:
  Position = (284.1, 269.0) = 21 45 53.42 -10 7 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 16.6
  Background counts = 61.4
  Rate = 0.005 +/- 0.0009

[Sun Jul 29 17:11:08 2012] Off-axis axis estimate = 2.37'
[Sun Jul 29 19:06:48 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 19:06:48 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sun Jul 29 19:06:48 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Sun Jul 29 19:06:48 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.62"
[Sun Jul 29 20:09:36 2012] fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jul 29 20:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12.csv
[Sun Jul 29 20:09:36 2012] fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jul 29 20:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12.csv
[Sun Jul 29 20:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 20:09:37 2012] fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jul 29 20:09:37 2012] fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jul 29 20:09:37 2012] Fit fullrun_mos1_xmm0675472001_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jul 29 22:07:48 2012] Spatial fit model total counts = 967.778000, observed total counts = 947.000000
[Sun Jul 29 22:07:48 2012] Offset between fit and detection position for source 20 = 0.196368 pixels
[Sun Jul 29 22:07:48 2012] 954.351600 total counts/ 940.184000 bgd. counts: snr = 0.462051
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.196368 pixels
  Position = (284.2, 268.8) = 21 45 53.41 -10 7 21.5
  Extent = 2.3 (1.9-4.8)", rotation angle = 0
  Source counts = 14.2 +/- 30.9
  Background counts = 940.2
  Rate = 0.0008 +/- 0.002
  Deleting source due to low Poisson probability