[Sat Jun  1 10:07:41 2013] Detection parameters:
  Position = (318.0, 338.8) = 20 34 41.60 -34 2 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 14.8
  Background counts = 24.8
  Rate = 0.009 +/- 0.001

[Sat Jun  1 10:07:43 2013] Off-axis axis estimate = 3.25'
[Sat Jun  1 16:28:48 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 16:28:48 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Jun  1 16:28:48 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sat Jun  1 16:28:48 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.06"
[Sat Jun  1 19:34:37 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun  1 19:34:37 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun  1 19:34:37 2013] Fit fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src14 appears to have run properly
[Sat Jun  1 19:34:38 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun  1 19:34:38 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun  1 19:34:38 2013] Fit fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun  1 19:35:21 2013] Spatial fit model total counts = 671.655000, observed total counts = 671.000000
[Sat Jun  1 19:35:21 2013] Offset between fit and detection position for source 3 = 6.266638 pixels
[Sat Jun  1 19:35:21 2013] 658.215100 total counts/ 571.287000 bgd. counts: snr = 3.636914
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.266638 pixels
  Position = (317.5, 332.6) = 20 34 41.79 -34 3 2.3
  Extent = 16.0 (15.8-16.1)", rotation angle = 0
  Source counts = 86.9 +/- 25.7
  Background counts = 571.3
  Rate = 0.007 +/- 0.002
[Sat Jun  1 19:35:21 2013] Spatial fit model total counts = 635.195000, observed total counts = 600.000000
[Sat Jun  1 19:35:21 2013] Offset between fit and detection position for source 3 = 0.778995 pixels
[Sat Jun  1 19:35:21 2013] Warning, changing simple spatial fit ID from 14 to 31
[Sat Jun  1 19:35:21 2013] 600.936000 total counts/ 497.392000 bgd. counts: snr = 4.642753
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.778995 pixels
  Position = (318.2, 332.5) = 20 34 41.52 -34 3 2.7
  Extent = 16.3 (16.3-32.6)", rotation angle = 0
  Source counts = 103.5 +/- 24.5
  Background counts = 497.4
  Rate = 0.009 +/- 0.002
[Sat Jun  1 19:35:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 19:35:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 19:35:21 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 19:35:21 2013] Source does appear to be extended
[Sat Jun  1 19:35:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 19:35:21 2013] Source is confused with source 16
[Sat Jun  1 23:11:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  1 23:11:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  1 23:11:36 2013] Initial guess for spatial extent in simple fitting = 16.32"
[Sat Jun  1 23:11:36 2013] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.996
[Sat Jun  1 23:11:36 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 16.32"
[Sun Jun  2 01:23:21 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun  2 01:23:21 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun  2 01:23:21 2013] Fit fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Jun  2 01:23:22 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun  2 01:23:22 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun  2 01:23:22 2013] Fit fullrun_mos2_xmm0675471701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun  2 01:23:57 2013] Warning, spatial fit 12 centroid is now closest to src. 16
[Sun Jun  2 01:23:57 2013] Spatial fit model total counts = 646.753000, observed total counts = 600.000000
[Sun Jun  2 01:23:57 2013] Offset between fit and detection position for source 3 = 2.492643 pixels
[Sun Jun  2 01:23:57 2013] Warning, changing simple spatial fit ID from 12 to 24
[Sun Jun  2 01:23:57 2013] 626.161300 total counts/ 530.570000 bgd. counts: snr = 4.149990
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.492643 pixels
  Position = (317.3, 334.8) = 20 34 41.84 -34 2 52.7
  Extent = 16.3 (16.3-16.3)", rotation angle = 0
  Source counts = 95.6 +/- 25.0
  Background counts = 530.6
  Rate = 0.008 +/- 0.002
[Sun Jun  2 01:23:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 01:23:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 01:23:57 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 01:23:57 2013] Source does appear to be extended
[Sun Jun  2 01:23:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 07:08:06 2013] XMMSAS src. selection expression = ellipse(27557.568000, 29079.870000, 979.152028, 979.152028, 0.000000, X, Y)
[Sun Jun  2 07:08:06 2013] Writing source region out to fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  2 07:08:06 2013] Extracting stamp from image fullrun_mos2_xmm0675471701_pi300-10000_cl_sm2.00.img.gz, (261, 279) - (374, 391)
[Sun Jun  2 07:08:06 2013] XMMSAS bgd. selection expression = annulus(27557.568000, 29079.870000, 1631.920047, 3263.840094, X, Y) && !ellipse(27691.763460, 27798.867800, 1201.280035, 955.320027, 121.149600, X, Y) && !ellipse(27116.718994, 26665.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.040649, 26993.674316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29287.538000, 26775.816000, 344.086410, 344.086410, 0.000000, X, Y) && !ellipse(26762.304443, 26227.130188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28563.513489, 27590.708099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28330.683350, 26565.627838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.815857, 27444.129242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28717.776001, 28208.767059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31423.635000, 31153.598000, 713.280021, 350.549610, 53.003016, X, Y) && !ellipse(28916.581940, 26488.942627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26824.448059, 25282.656616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27911.127655, 25339.309631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.199249, 28388.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29180.712219, 27786.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25699.792000, 25578.112000, 1051.416030, 1051.416030, 0.000000, X, Y) && !ellipse(28133.696106, 29429.990265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29257.511597, 28670.049194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.946000, 26881.478000, 1017.104029, 1017.104029, 0.000000, X, Y) && !ellipse(26344.394867, 25103.412933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.113220, 27353.584778, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 07:08:06 2013] Writing fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3.gif
[Sun Jun  2 07:17:30 2013] Mean detx,y = (442.37, 1630.35) 
[Sun Jun  2 07:17:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 07:17:46 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 07:17:47 2013] Setting source spectrum file to fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  2 07:17:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  2 07:32:29 2013] Not generating rmf since there are only 95 counts
[Sun Jun  2 07:32:29 2013] rmf not generated due to insufficient counts
[Sun Jun  2 07:40:21 2013] Updating aperture counts using extracted products
[Sun Jun  2 07:40:21 2013] Total counts from fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1603.00
[Sun Jun  2 07:40:21 2013] Total counts from fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1639.00
[Sun Jun  2 07:40:21 2013] Got source and background scale factors 3008000.000000, 14489744.000000
[Sun Jun  2 07:40:21 2013] User source parameters:
  Position = (317.3, 334.8) = 20 34 41.84 -34 2 52.7
  Extent = 16.3 (16.3-16.3)", rotation angle = 0
  Source aperture counts = 1262.8 +/- 41.0
  Background aperture counts = 340.2
  Rate = 0.1 +/- 0.004

[Sun Jun  2 07:40:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 07:40:26 2013] Using photon index=1.80, rate=0.00825, arf fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3.arf
[Sun Jun  2 07:40:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 07:40:26 2013] Updating source flux to 8e-14
[Sun Jun  2 07:40:34 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun Jun  2 07:40:34 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 07:40:37 2013] xmm0675471701/analysis//spectral/fullrun_mos2_xmm0675471701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete