[Sat Jun  1 10:07:41 2013] Detection parameters:
  Position = (314.0, 297.2) = 20 34 43.00 -34 5 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.6 +/- 17.1
  Background counts = 18.6
  Rate = 0.01 +/- 0.002

[Sat Jun  1 10:07:43 2013] Off-axis axis estimate = 1.13'
[Sat Jun  1 16:28:48 2013] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 16:28:48 2013] Initial guess for spatial extent in simple fitting = 6.99"
[Sat Jun  1 16:28:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Sat Jun  1 16:28:48 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 6.99"
[Sat Jun  1 19:34:37 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun  1 19:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9.csv
[Sat Jun  1 19:34:37 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun  1 19:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9.csv
[Sat Jun  1 19:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 19:34:38 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun  1 19:34:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun  1 19:34:38 2013] fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun  1 19:34:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun  1 19:34:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675471701_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 19:35:21 2013] Spatial fit model total counts = 991.305000, observed total counts = 883.000000
[Sat Jun  1 19:35:21 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 19:35:21 2013] Spatial fit model total counts = 708.601000, observed total counts = 692.000000
[Sat Jun  1 19:35:21 2013] Offset between fit and detection position for source 13 = 0.352144 pixels
[Sat Jun  1 19:35:21 2013] Warning, changing simple spatial fit ID from 9 to 18
[Sat Jun  1 19:35:21 2013] 723.683800 total counts/ 713.520000 bgd. counts: snr = 0.380499
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.352144 pixels
  Position = (314.1, 297.5) = 20 34 42.98 -34 5 34.8
  Extent = 1.7" x 1.7", rotation angle = 0
  Source counts = 10.2 +/- 26.9
  Background counts = 713.5
  Rate = 0.0009 +/- 0.002
  Deleting source due to low Poisson probability