[Fri May 3 09:02:18 2013] Detection parameters: Position = (317.0, 315.9) = 19 31 38.27 -33 54 41.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 4359.8 +/- 81.1 Background counts = 67.9 Rate = 0.4 +/- 0.007 [Fri May 3 09:02:19 2013] Off-axis axis estimate = 1.85' [Fri May 3 09:03:47 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Fri May 3 09:03:47 2013] Initial guess for spatial extent in simple fitting = 7.35" [Fri May 3 09:03:47 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834 [Fri May 3 09:03:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35" [Fri May 3 10:06:20 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1.ximg exists [Fri May 3 10:06:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1.csv [Fri May 3 10:06:20 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1_1.ximg exists [Fri May 3 10:06:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1.csv [Fri May 3 10:06:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 10:06:21 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri May 3 10:06:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1.csv [Fri May 3 10:06:21 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri May 3 10:06:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1.csv [Fri May 3 10:06:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675471601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 10:24:55 2013] Warning, spatial fit 1 centroid is now closest to src. 8 [Fri May 3 10:24:55 2013] Source 1 is offset by -6.410878 and -4.959580 pixels which is larger than 2 X fitted extent = 7.306069 x 4.441996, not incorporating fit results [Fri May 3 10:24:55 2013] Vigneting correction estimate = 1.000000 [Fri May 3 10:24:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 10:24:55 2013] Assessing source extent using major [Fri May 3 10:24:55 2013] Source does appear to be extended [Fri May 3 10:24:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 10:25:02 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Fri May 3 10:25:02 2013] Initial guess for spatial extent in simple fitting = 7.35" [Fri May 3 10:25:02 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834 [Fri May 3 10:25:02 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.35" [Fri May 3 11:49:20 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1.ximg exists [Fri May 3 11:49:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1.csv [Fri May 3 11:49:20 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1_1.ximg exists [Fri May 3 11:49:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1.csv [Fri May 3 11:49:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 11:49:21 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Fri May 3 11:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1.csv [Fri May 3 11:49:21 2013] fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Fri May 3 11:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1.csv [Fri May 3 11:49:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675471601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 12:17:55 2013] Warning, spatial fit 1 centroid is now closest to src. 8 [Fri May 3 12:17:55 2013] Spatial fit model total counts = 1866.700000, observed total counts = 1206.000000 [Fri May 3 12:17:55 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 3 12:17:55 2013] Vigneting correction estimate = 1.000000 [Fri May 3 12:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 12:17:55 2013] Assessing source extent using major [Fri May 3 12:17:55 2013] Source does appear to be extended [Fri May 3 12:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 12:18:02 2013] Counts = 4359.766602, rescaling region sizes by 2.000000 [Fri May 3 12:18:02 2013] XMMSAS src. selection expression = ellipse(27530.279633, 27438.962555, 1305.000000, 1305.000000, 0.000000, X, Y) [Fri May 3 12:18:02 2013] Writing source region out to fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_src.reg [Fri May 3 12:18:02 2013] Extracting stamp from image fullrun_pn_xmm0675471601_pi300-10000_cl_sm2.00.img.gz, (242, 241) - (392, 391) [Fri May 3 12:18:02 2013] XMMSAS bgd. selection expression = annulus(27530.279633, 27438.962555, 4350.000000, 8700.000000, X, Y) && !ellipse(26955.070190, 28708.897583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27680.936615, 28566.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21787.627823, 18272.834991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35690.241364, 18063.829758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28557.757385, 28419.512665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25538.938629, 27442.589325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26112.556000, 26300.542000, 1044.856030, 1044.856030, 0.000000, X, Y) && !ellipse(26544.215027, 25806.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.371680, 22626.722200, 424.666412, 245.847207, 340.618062, X, Y) && !ellipse(32077.198600, 18595.931600, 862.712025, 485.720814, 19.764709, X, Y) && !ellipse(27697.955353, 29870.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27573.301727, 29322.968689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28589.808899, 28893.568146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26108.179565, 28898.410919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29495.991638, 26579.226898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.072000, 25442.072000, 965.400028, 965.400028, 0.000000, X, Y) && !ellipse(28484.396271, 25711.319061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.516785, 25180.793762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.487061, 25536.254395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22197.282600, 25499.925600, 1653.632048, 370.562411, 87.434589, X, Y) && !ellipse(26584.361725, 25269.211548, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 3 12:18:02 2013] Writing fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1.gif [Fri May 3 12:18:14 2013] Mean detx,y = (192.55, -290.34) [Fri May 3 12:18:18 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 3 12:20:22 2013] Binned source spectrum to 10 counts/bin [Fri May 3 12:20:22 2013] Setting source spectrum file to fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Fri May 3 12:20:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Fri May 3 12:33:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 3 12:33:13 2013] rmf not generated due to insufficient counts [Fri May 3 14:08:22 2013] Updating aperture counts using extracted products [Fri May 3 14:08:22 2013] Total counts from fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 12547.00 [Fri May 3 14:08:22 2013] Total counts from fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 18002.00 [Fri May 3 14:08:22 2013] Got source and background scale factors 4762512.000000, 155380249.000000 [Fri May 3 14:08:22 2013] User source parameters: Position = (317.0, 315.9) = 19 31 38.27 -33 54 41.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 11995.2 +/- 113.0 Background aperture counts = 551.8 Rate = 1 +/- 0.01 [Fri May 3 14:08:22 2013] Updating counts from extracted products [Fri May 3 14:08:22 2013] Set source signif. to 11995.23/23.49 = 510.66 [Fri May 3 14:08:27 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 14:08:27 2013] Using photon index=1.80, rate=1.21, arf fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1.arf [Fri May 3 14:08:27 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 3 14:08:27 2013] Updating source flux to 3.2e-12 [Fri May 3 14:08:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 14:08:33 2013] xmm0675471601/analysis//spectral/fullrun_pn_xmm0675471601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete