[Tue Sep  4 10:34:47 2012] Detection parameters:
  Position = (305.7, 300.1) = 3 28 25.44 -55 43 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.9 +/- 18.0
  Background counts = 65.7
  Rate = 0.01 +/- 0.003

[Tue Sep  4 10:34:47 2012] Off-axis axis estimate = 0.54'
[Tue Sep  4 10:36:47 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 10:36:47 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Tue Sep  4 10:36:47 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Tue Sep  4 10:36:47 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 6.70"
[Tue Sep  4 12:25:39 2012] fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32.ximg exists
[Tue Sep  4 12:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32.csv
[Tue Sep  4 12:25:39 2012] fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Sep  4 12:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32.csv
[Tue Sep  4 12:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 12:25:39 2012] fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Sep  4 12:25:39 2012] fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Sep  4 12:25:39 2012] Fit fullrun_pn_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Sep  4 14:53:39 2012] Spatial fit model total counts = 1633.020000, observed total counts = 1633.000000
[Tue Sep  4 14:53:39 2012] Offset between fit and detection position for source 32 = 0.625796 pixels
[Tue Sep  4 14:53:39 2012] Warning, changing simple spatial fit ID from 32 to 15
[Tue Sep  4 14:53:39 2012] 1605.206000 total counts/ 1576.740000 bgd. counts: snr = 0.716880
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.625796 pixels
  Position = (305.1, 299.9) = 3 28 25.74 -55 43 55.4
  Extent = 4.5 (2.6-8.3)", rotation angle = 0
  Source counts = 28.5 +/- 40.1
  Background counts = 1576.7
  Rate = 0.005 +/- 0.007
  Deleting source due to low Poisson probability