[Tue Sep  4 10:35:36 2012] Detection parameters:
  Position = (279.2, 318.8) = 3 28 39.08 -55 42 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.9 +/- 21.8
  Background counts = 41.9
  Rate = 0.02 +/- 0.002

[Tue Sep  4 10:35:37 2012] Off-axis axis estimate = 2.03'
[Tue Sep  4 13:43:53 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 13:43:53 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Sep  4 13:43:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Sep  4 13:43:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Tue Sep  4 14:53:29 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Sep  4 14:53:29 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Sep  4 14:53:29 2012] Fit fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Sep  4 14:53:29 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep  4 14:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Sep  4 14:53:30 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep  4 14:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Sep  4 14:53:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675471001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 14:53:49 2012] Spatial fit model total counts = 1493.420000, observed total counts = 1348.000000
[Tue Sep  4 14:53:49 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 14:53:49 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 14:53:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 14:53:49 2012] Assessing source extent using major
[Tue Sep  4 14:53:49 2012] Source does appear to be extended
[Tue Sep  4 14:53:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 16:44:51 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 16:44:51 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Sep  4 16:44:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Sep  4 16:44:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.44"
[Tue Sep  4 17:30:23 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep  4 17:30:23 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep  4 17:30:23 2012] Fit fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Sep  4 17:30:23 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep  4 17:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Sep  4 17:30:23 2012] fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep  4 17:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Sep  4 17:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675471001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 17:30:34 2012] Spatial fit model total counts = 1492.970000, observed total counts = 1348.000000
[Tue Sep  4 17:30:34 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 17:30:34 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 17:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 17:30:34 2012] Assessing source extent using major
[Tue Sep  4 17:30:34 2012] Source does appear to be extended
[Tue Sep  4 17:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 17:41:33 2012] XMMSAS src. selection expression = ellipse(24244.367584, 27688.373352, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 17:41:33 2012] Writing source region out to fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4_src.reg
[Tue Sep  4 17:41:33 2012] Extracting stamp from image fullrun_mos2_xmm0675471001_pi300-10000_cl_sm2.00.img.gz, (242, 281) - (317, 356)
[Tue Sep  4 17:41:33 2012] XMMSAS bgd. selection expression = annulus(24244.367584, 27688.373352, 1087.500000, 2175.000000, X, Y) && !ellipse(24873.038800, 26988.374000, 1125.728032, 1125.728032, 0.000000, X, Y) && !ellipse(24637.500427, 28482.813873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.000580, 27346.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24217.448242, 28515.024689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.413147, 28134.784668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.048004, 27178.411255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.967590, 28914.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.815200, 27942.429000, 905.728026, 905.728026, 0.000000, X, Y) && !ellipse(25632.361145, 28745.213074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24404.479126, 25545.430176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26642.880000, 29120.173800, 1223.960035, 1223.960035, 0.000000, X, Y) && !ellipse(23244.443726, 27173.196777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26770.958000, 28000.414000, 1167.576034, 1167.576034, 0.000000, X, Y)
[Tue Sep  4 17:41:33 2012] Writing fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4.gif
[Tue Sep  4 17:41:34 2012] Mean detx,y = (-70.59, 370.96) 
[Tue Sep  4 17:41:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 17:41:40 2012] grppha failed
[Tue Sep  4 17:41:40 2012] Setting source spectrum file to fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 17:41:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Sep  4 17:43:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 17:43:30 2012] rmf not generated due to insufficient counts
[Tue Sep  4 17:43:45 2012] Updating aperture counts using extracted products
[Tue Sep  4 17:43:45 2012] Error reading totcts from fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 17:43:45 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 17:43:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 17:43:48 2012] xmm0675471001/analysis//spectral/fullrun_mos2_xmm0675471001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete