[Wed May 22 01:15:54 2013] Detection parameters:
  Position = (313.2, 317.0) = 22 10 21.12 -12 10 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 705.5 +/- 41.6
  Background counts = 221.0
  Rate = 0.06 +/- 0.003

[Wed May 22 01:15:56 2013] Off-axis axis estimate = 1.72'
[Wed May 22 01:19:56 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 22 01:19:56 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 22 01:19:56 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed May 22 01:19:56 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.29"
[Wed May 22 04:54:45 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 22 04:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2.csv
[Wed May 22 04:54:45 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 22 04:54:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2.csv
[Wed May 22 04:54:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 04:54:46 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 22 04:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 22 04:54:46 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 22 04:54:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 22 04:54:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 08:47:27 2013] Warning, spatial fit 2 centroid is now closest to src. 3
[Wed May 22 08:47:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 08:47:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 08:47:27 2013] Assessing source extent using major
[Wed May 22 08:47:27 2013] Source does appear to be extended
[Wed May 22 08:47:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:47:58 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 22 08:47:58 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 22 08:47:58 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed May 22 08:47:58 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.29"
[Wed May 22 11:20:38 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 22 11:20:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2.csv
[Wed May 22 11:20:38 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 22 11:20:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2.csv
[Wed May 22 11:20:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 11:20:39 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 22 11:20:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May 22 11:20:39 2013] fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 22 11:20:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May 22 11:20:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 14:27:39 2013] Spatial fit model total counts = 5580.670000, observed total counts = 5021.000000
[Wed May 22 14:27:39 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 14:27:39 2013] Spatial fit model total counts = 4422.560000, observed total counts = 3874.000000
[Wed May 22 14:27:39 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 14:27:39 2013] Vigneting correction estimate = 1.000000
[Wed May 22 14:27:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 14:27:39 2013] Assessing source extent using major
[Wed May 22 14:27:39 2013] Source does appear to be extended
[Wed May 22 14:27:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 14:27:39 2013] Source is confused with source 25
[Wed May 22 14:27:56 2013] XMMSAS src. selection expression = ellipse(27198.493896, 27527.093597, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 14:27:56 2013] Writing source region out to fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_src.reg
[Wed May 22 14:27:56 2013] Extracting stamp from image fullrun_pn_xmm0675470501_pi300-10000_cl_sm2.00.img.gz, (276, 279) - (351, 354)
[Wed May 22 14:27:57 2013] XMMSAS bgd. selection expression = annulus(27198.493896, 27527.093597, 1087.500000, 2175.000000, X, Y) && !ellipse(26569.530731, 27868.570190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.602753, 27274.910950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.395905, 28364.057068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.637451, 29411.115662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28085.350677, 29253.653839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.015137, 29010.862030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26912.847260, 28712.627899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.213684, 28759.359070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25037.865570, 28214.247040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28951.771698, 27930.851868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24715.175964, 27785.029694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26092.591888, 27704.069885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29842.300385, 27635.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.784424, 26752.026825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25843.385529, 27014.662323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29036.076843, 26837.173615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27341.792800, 26758.016000, 2292.784066, 2292.784066, 0.000000, X, Y) && !ellipse(25986.345581, 26410.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24471.903595, 26592.215302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29876.348480, 26133.349243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.108000, 26087.304000, 1146.392033, 1146.392033, 0.000000, X, Y) && !ellipse(28735.883301, 26315.893127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.076141, 25536.304840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.032806, 25803.499023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27967.390381, 25710.732300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29628.724000, 25291.822000, 1257.448036, 1257.448036, 0.000000, X, Y) && !ellipse(28112.328430, 25008.800964, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 14:27:57 2013] Writing fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2.gif
[Wed May 22 14:28:06 2013] Mean detx,y = (-385.01, -434.43) 
[Wed May 22 14:28:08 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 14:28:24 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 14:28:25 2013] Setting source spectrum file to fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 22 14:28:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 22 14:47:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 14:47:17 2013] rmf not generated due to insufficient counts
[Wed May 22 21:14:53 2013] Updating aperture counts using extracted products
[Wed May 22 21:14:53 2013] Total counts from fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3714.00
[Wed May 22 21:14:53 2013] Total counts from fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1.00
[Wed May 22 21:14:53 2013] Got source and background scale factors 1254358.000000, 0.000000
[Wed May 22 21:14:53 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 22 21:15:00 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 21:15:00 2013] Using photon index=1.80, rate=0.0558, arf fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2.arf
[Wed May 22 21:15:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 21:15:00 2013] Updating source flux to 1.5e-13
[Wed May 22 21:15:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 21:15:20 2013] xmm0675470501/analysis//spectral/fullrun_pn_xmm0675470501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete