[Sun Jul  8 03:40:16 2012] Detection parameters:
  Position = (269.2, 282.2) = 21 54 15.03 -57 51 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.8 +/- 15.5
  Background counts = 68.4
  Rate = 0.008 +/- 0.001

[Sun Jul  8 03:40:16 2012] Off-axis axis estimate = 2.42'
[Sun Jul  8 06:03:50 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 06:03:50 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Sun Jul  8 06:03:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.884
[Sun Jul  8 06:03:50 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.64"
[Sun Jul  8 08:12:19 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jul  8 08:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14.csv
[Sun Jul  8 08:12:19 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jul  8 08:12:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14.csv
[Sun Jul  8 08:12:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 08:12:20 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jul  8 08:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jul  8 08:12:20 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jul  8 08:12:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jul  8 08:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 08:12:34 2012] Warning, spatial fit 14 centroid is now closest to src. 22
[Sun Jul  8 08:12:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 08:12:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 08:12:34 2012] Assessing source extent using major
[Sun Jul  8 08:12:34 2012] Source does appear to be extended
[Sun Jul  8 08:12:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 08:12:34 2012] Source is confused with source 12
[Sun Jul  8 08:12:34 2012] Source is confused with source 13
[Sun Jul  8 10:52:08 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 10:52:08 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Sun Jul  8 10:52:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.884
[Sun Jul  8 10:52:08 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.64"
[Sun Jul  8 12:49:15 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jul  8 12:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14.csv
[Sun Jul  8 12:49:15 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jul  8 12:49:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14.csv
[Sun Jul  8 12:49:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 12:49:16 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jul  8 12:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jul  8 12:49:16 2012] fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jul  8 12:49:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jul  8 12:49:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 12:49:35 2012] Warning, spatial fit 14 centroid is now closest to src. 22
[Sun Jul  8 12:49:35 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 12:49:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 12:49:35 2012] Assessing source extent using major
[Sun Jul  8 12:49:35 2012] Source does appear to be extended
[Sun Jul  8 12:49:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 19:41:32 2012] XMMSAS src. selection expression = ellipse(23372.878113, 24507.109283, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul  8 19:41:32 2012] Writing source region out to fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20_src.reg
[Sun Jul  8 19:41:32 2012] Extracting stamp from image fullrun_mos2_xmm0675470401_pi300-10000_cl_sm2.00.img.gz, (232, 245) - (307, 320)
[Sun Jul  8 19:41:32 2012] XMMSAS bgd. selection expression = annulus(23372.878113, 24507.109283, 1087.500000, 2175.000000, X, Y) && !ellipse(25131.424000, 23759.446000, 1215.264035, 1215.264035, 0.000000, X, Y) && !ellipse(24140.580141, 24148.382855, 1214.688035, 490.354467, 104.860691, X, Y) && !ellipse(24250.426361, 24837.471924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24930.005005, 23286.841888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.786316, 25427.175171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.970612, 23802.406097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26055.055084, 23520.805725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.578766, 23432.552551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.962830, 23791.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.505157, 22496.152924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.211639, 25857.130615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23919.997345, 26140.026642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23506.492462, 25022.320374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22871.523621, 24918.644135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.614319, 25179.498108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23414.259399, 25541.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.411591, 24307.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25764.969238, 25755.766907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22572.001801, 25865.284210, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul  8 19:41:32 2012] Writing fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20.gif
[Sun Jul  8 19:43:57 2012] Mean detx,y = (-842.63, 472.12) 
[Sun Jul  8 19:43:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 19:44:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 19:44:08 2012] Setting source spectrum file to fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jul  8 19:44:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jul  8 20:02:52 2012] Not generating rmf since there are only 94 counts
[Sun Jul  8 20:02:52 2012] rmf not generated due to insufficient counts
[Sun Jul  8 20:05:04 2012] Updating aperture counts using extracted products
[Sun Jul  8 20:05:04 2012] Error reading totcts from fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jul  8 20:05:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 20:05:04 2012] Using photon index=1.80, rate=0.00806, arf fullrun_mos2_xmm0675470401_pi300-10000_pass1_cl_src20.arf
[Sun Jul  8 20:05:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 20:05:04 2012] Updating source flux to 8.1e-14
[Sun Jul  8 20:05:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting