[Mon Jun  3 10:20:27 2013] Detection parameters:
  Position = (319.0, 314.0) = 20 34 47.33 -35 48 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.3 +/- 25.8
  Background counts = 109.2
  Rate = 0.03 +/- 0.003

[Mon Jun  3 10:20:28 2013] Off-axis axis estimate = 1.87'
[Mon Jun  3 10:23:34 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 10:23:34 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Jun  3 10:23:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Mon Jun  3 10:23:34 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.36"
[Mon Jun  3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jun  3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30.csv
[Mon Jun  3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jun  3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30.csv
[Mon Jun  3 13:50:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:50:52 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun  3 13:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun  3 13:50:52 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun  3 13:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon Jun  3 13:50:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:02:09 2013] Warning, spatial fit 30 centroid is now closest to src. 5
[Mon Jun  3 18:02:09 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:02:09 2013] Assessing source extent using major
[Mon Jun  3 18:02:09 2013] Source does appear to be extended
[Mon Jun  3 18:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 18:02:09 2013] Source is confused with source 5
[Mon Jun  3 18:02:43 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 18:02:43 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Jun  3 18:02:43 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Mon Jun  3 18:02:43 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.36"
[Mon Jun  3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jun  3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22.csv
[Mon Jun  3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jun  3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22.csv
[Mon Jun  3 20:40:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 20:40:07 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jun  3 20:40:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun  3 20:40:07 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jun  3 20:40:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Jun  3 20:40:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 00:09:36 2013] Warning, spatial fit 22 centroid is now closest to src. 3
[Tue Jun  4 00:09:36 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 00:09:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 00:09:36 2013] Assessing source extent using major
[Tue Jun  4 00:09:36 2013] Source does appear to be extended
[Tue Jun  4 00:09:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 00:10:05 2013] XMMSAS src. selection expression = ellipse(27701.778595, 27271.419586, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  4 00:10:05 2013] Writing source region out to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_src.reg
[Tue Jun  4 00:10:05 2013] Extracting stamp from image fullrun_pn_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (281, 277) - (356, 352)
[Tue Jun  4 00:10:05 2013] XMMSAS bgd. selection expression = annulus(27701.778595, 27271.419586, 1087.500000, 2175.000000, X, Y) && !ellipse(26691.365000, 26475.975000, 434.996813, 434.996813, 0.000000, X, Y) && !ellipse(28776.900848, 27275.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.014191, 26825.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.708000, 26277.908000, 2484.168071, 2484.168071, 0.000000, X, Y) && !ellipse(27656.056335, 28449.641937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.635620, 28211.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.862152, 28359.453247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.961670, 27945.186371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.574219, 28074.648254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25848.714172, 27863.318542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.875092, 27518.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.477448, 26924.298401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.853790, 25972.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.488464, 25887.440430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.056610, 25619.093964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25703.316803, 25181.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.012000, 25570.910000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(27185.200165, 25184.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.884521, 24913.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.481232, 25172.950806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25324.852997, 24362.322571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.036133, 24390.792450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.124800, 24562.786000, 1260.072036, 1260.072036, 0.000000, X, Y)
[Tue Jun  4 00:10:05 2013] Writing fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31.gif
[Tue Jun  4 00:26:05 2013] Mean detx,y = (213.87, -359.89) 
[Tue Jun  4 00:26:07 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 00:26:23 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 00:26:23 2013] Setting source spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jun  4 00:26:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jun  4 04:20:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  4 04:20:16 2013] rmf not generated due to insufficient counts
[Tue Jun  4 06:15:26 2013] Updating aperture counts using extracted products
[Tue Jun  4 06:15:26 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 2025.00
[Tue Jun  4 06:15:26 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 360.00
[Tue Jun  4 06:15:26 2013] Got source and background scale factors 1322932.000000, 541958.000000
[Tue Jun  4 06:15:27 2013] User source parameters:
  Position = (319.0, 314.0) = 20 34 47.33 -35 48 44.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1146.2 +/- 46.0
  Background aperture counts = 878.8
  Rate = 0.1 +/- 0.005

[Tue Jun  4 06:15:27 2013] Updating counts from extracted products
[Tue Jun  4 06:15:27 2013] Set source signif. to 1146.23/29.64 = 38.67
[Tue Jun  4 06:15:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 06:15:32 2013] Using photon index=1.80, rate=0.114, arf fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31.arf
[Tue Jun  4 06:15:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 06:15:32 2013] Updating source flux to 3e-13
[Tue Jun  4 06:15:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun  4 06:16:08 2013] xmm0675470301/analysis//spectral/fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete