[Mon Jun 3 10:20:25 2013] Detection parameters: Position = (331.3, 314.1) = 20 34 42.91 -35 48 36.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.9 +/- 18.9 Background counts = 117.8 Rate = 0.03 +/- 0.003 [Mon Jun 3 10:20:28 2013] Off-axis axis estimate = 2.64' [Mon Jun 3 10:23:34 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 10:23:34 2013] Initial guess for spatial extent in simple fitting = 7.75" [Mon Jun 3 10:23:34 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961 [Mon Jun 3 10:23:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.75" [Mon Jun 3 13:50:50 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3.ximg exists [Mon Jun 3 13:50:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3.csv [Mon Jun 3 13:50:50 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3_1.ximg exists [Mon Jun 3 13:50:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3.csv [Mon Jun 3 13:50:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Mon Jun 3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon Jun 3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Mon Jun 3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon Jun 3 13:50:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 18:02:09 2013] Warning, spatial fit 3 centroid is now closest to src. 4 [Mon Jun 3 18:02:09 2013] Source 3 is offset by 4.813490 and 3.818591 pixels which is larger than 2 X fitted extent = 2.416221 x 1.974487, not incorporating fit results [Mon Jun 3 18:02:09 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 18:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 18:02:09 2013] Assessing source extent using major [Mon Jun 3 18:02:09 2013] Source does appear to be extended [Mon Jun 3 18:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 18:02:09 2013] Source is confused with source 33 [Mon Jun 3 18:02:43 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 18:02:43 2013] Initial guess for spatial extent in simple fitting = 7.75" [Mon Jun 3 18:02:43 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961 [Mon Jun 3 18:02:43 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.75" [Mon Jun 3 20:40:05 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3.ximg exists [Mon Jun 3 20:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3.csv [Mon Jun 3 20:40:05 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3_1.ximg exists [Mon Jun 3 20:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3.csv [Mon Jun 3 20:40:05 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Mon Jun 3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon Jun 3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Mon Jun 3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon Jun 3 20:40:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 00:09:36 2013] Source 3 is offset by 4.849435 and 3.387120 pixels which is larger than 2 X fitted extent = 2.653678 x 2.653678, not incorporating fit results [Tue Jun 4 00:09:36 2013] Source 3 is offset by 5.084171 and 3.328867 pixels which is larger than 2 X fitted extent = 2.358281 x 2.358281, not incorporating fit results [Tue Jun 4 00:09:36 2013] Source 3 is offset by 5.789136 and -3.119340 pixels which is larger than 2 X fitted extent = 1.100529 x 1.100529, not incorporating fit results [Tue Jun 4 00:09:36 2013] Source 3 is offset by 5.555872 and 2.969327 pixels which is larger than 2 X fitted extent = 4.716552 x 1.311260, not incorporating fit results [Tue Jun 4 00:09:36 2013] Source 3 is offset by 4.751688 and 3.415210 pixels which is larger than 2 X fitted extent = 2.258874 x 2.258874, not incorporating fit results [Tue Jun 4 00:09:36 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 00:09:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 00:09:36 2013] Assessing source extent using major [Tue Jun 4 00:09:36 2013] Source does appear to be extended [Tue Jun 4 00:09:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 4 00:10:05 2013] XMMSAS src. selection expression = ellipse(28776.900848, 27275.253448, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jun 4 00:10:05 2013] Writing source region out to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_src.reg [Tue Jun 4 00:10:05 2013] Extracting stamp from image fullrun_pn_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (294, 277) - (369, 352) [Tue Jun 4 00:10:05 2013] XMMSAS bgd. selection expression = annulus(28776.900848, 27275.253448, 1087.500000, 2175.000000, X, Y) && !ellipse(26691.365000, 26475.975000, 434.996813, 434.996813, 0.000000, X, Y) && !ellipse(27763.014191, 26825.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.708000, 26277.908000, 2484.168071, 2484.168071, 0.000000, X, Y) && !ellipse(27656.056335, 28449.641937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.635620, 28211.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.862152, 28359.453247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.961670, 27945.186371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.574219, 28074.648254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25848.714172, 27863.318542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.875092, 27518.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.778595, 27271.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.477448, 26924.298401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.853790, 25972.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.488464, 25887.440430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.056610, 25619.093964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.012000, 25570.910000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(27185.200165, 25184.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28958.884521, 24913.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.481232, 25172.950806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.036133, 24390.792450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.124800, 24562.786000, 1260.072036, 1260.072036, 0.000000, X, Y) [Tue Jun 4 00:10:05 2013] Writing fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3.gif [Tue Jun 4 00:14:09 2013] Mean detx,y = (1133.65, -606.79) [Tue Jun 4 00:14:14 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 4 00:14:37 2013] Binned source spectrum to 10 counts/bin [Tue Jun 4 00:14:37 2013] Setting source spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue Jun 4 00:14:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue Jun 4 00:41:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Jun 4 00:41:58 2013] rmf not generated due to insufficient counts [Tue Jun 4 06:15:20 2013] Updating aperture counts using extracted products [Tue Jun 4 06:15:20 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1469.00 [Tue Jun 4 06:15:20 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 798.00 [Tue Jun 4 06:15:20 2013] Got source and background scale factors 1083950.000000, 1533331.000000 [Tue Jun 4 06:15:20 2013] User source parameters: Position = (331.3, 314.1) = 20 34 42.91 -35 48 36.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 904.9 +/- 39.3 Background aperture counts = 564.1 Rate = 0.09 +/- 0.004 [Tue Jun 4 06:15:20 2013] Updating counts from extracted products [Tue Jun 4 06:15:20 2013] Set source signif. to 904.87/23.75 = 38.10 [Tue Jun 4 06:15:31 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 4 06:15:31 2013] Using photon index=1.80, rate=0.0902, arf fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3.arf [Tue Jun 4 06:15:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 4 06:15:31 2013] Updating source flux to 2.5e-13 [Tue Jun 4 06:15:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Jun 4 06:16:08 2013] xmm0675470301/analysis//spectral/fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete