[Mon Jun 3 10:20:27 2013] Detection parameters: Position = (297.7, 320.8) = 20 34 54.94 -35 48 14.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 73.2 +/- 15.9 Background counts = 75.8 Rate = 0.009 +/- 0.002 [Mon Jun 3 10:20:28 2013] Off-axis axis estimate = 1.62' [Mon Jun 3 10:23:34 2013] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 10:23:34 2013] Initial guess for spatial extent in simple fitting = 7.24" [Mon Jun 3 10:23:34 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854 [Mon Jun 3 10:23:34 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.24" [Mon Jun 3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28.ximg exists [Mon Jun 3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28.csv [Mon Jun 3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28_1.ximg exists [Mon Jun 3 13:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28.csv [Mon Jun 3 13:50:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 13:50:52 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Mon Jun 3 13:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28.csv [Mon Jun 3 13:50:52 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Mon Jun 3 13:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28.csv [Mon Jun 3 13:50:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 18:02:09 2013] Source 29 is offset by 7.327197 and -1.556651 pixels which is larger than 2 X fitted extent = 3.510648 x 3.510648, not incorporating fit results [Mon Jun 3 18:02:09 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 18:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 18:02:09 2013] Assessing source extent using major [Mon Jun 3 18:02:09 2013] Source does appear to be extended [Mon Jun 3 18:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 3 18:02:43 2013] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 18:02:43 2013] Initial guess for spatial extent in simple fitting = 7.24" [Mon Jun 3 18:02:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854 [Mon Jun 3 18:02:43 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.24" [Mon Jun 3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20.ximg exists [Mon Jun 3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20.csv [Mon Jun 3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20_1.ximg exists [Mon Jun 3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20.csv [Mon Jun 3 20:40:06 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 3 20:40:07 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Mon Jun 3 20:40:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20.csv [Mon Jun 3 20:40:07 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Mon Jun 3 20:40:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20.csv [Mon Jun 3 20:40:07 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 00:09:36 2013] Source 29 is offset by 7.327197 and -1.575651 pixels which is larger than 2 X fitted extent = 3.400956 x 3.400956, not incorporating fit results [Tue Jun 4 00:09:36 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 00:09:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 00:09:36 2013] Assessing source extent using major [Tue Jun 4 00:09:36 2013] Source does appear to be extended [Tue Jun 4 00:09:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 4 00:10:05 2013] XMMSAS src. selection expression = ellipse(25848.714172, 27863.318542, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jun 4 00:10:05 2013] Writing source region out to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_src.reg [Tue Jun 4 00:10:05 2013] Extracting stamp from image fullrun_pn_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (260, 283) - (335, 358) [Tue Jun 4 00:10:05 2013] XMMSAS bgd. selection expression = annulus(25848.714172, 27863.318542, 1087.500000, 2175.000000, X, Y) && !ellipse(26691.365000, 26475.975000, 434.996813, 434.996813, 0.000000, X, Y) && !ellipse(28776.900848, 27275.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27763.014191, 26825.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.708000, 26277.908000, 2484.168071, 2484.168071, 0.000000, X, Y) && !ellipse(27656.056335, 28449.641937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.862152, 28359.453247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.961670, 27945.186371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.574219, 28074.648254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.875092, 27518.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.778595, 27271.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.488464, 25887.440430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25703.316803, 25181.879669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.012000, 25570.910000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(27185.200165, 25184.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.481232, 25172.950806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.124800, 24562.786000, 1260.072036, 1260.072036, 0.000000, X, Y) [Tue Jun 4 00:10:05 2013] Writing fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29.gif [Tue Jun 4 00:24:37 2013] Mean detx,y = (-1604.57, -330.64) [Tue Jun 4 00:24:40 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 4 00:25:13 2013] Binned source spectrum to 10 counts/bin [Tue Jun 4 00:25:13 2013] Setting source spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Tue Jun 4 00:25:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_bgd.pi.gz [Tue Jun 4 04:19:42 2013] Not generating rmf since there are only 73 counts [Tue Jun 4 04:19:42 2013] rmf not generated due to insufficient counts [Tue Jun 4 06:15:25 2013] Updating aperture counts using extracted products [Tue Jun 4 06:15:25 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 793.00 [Tue Jun 4 06:15:26 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1886.00 [Tue Jun 4 06:15:26 2013] Got source and background scale factors 1070312.000000, 4735886.000000 [Tue Jun 4 06:15:26 2013] User source parameters: Position = (297.7, 320.8) = 20 34 54.94 -35 48 14.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 366.8 +/- 29.2 Background aperture counts = 426.2 Rate = 0.04 +/- 0.003 [Tue Jun 4 06:15:26 2013] Updating counts from extracted products [Tue Jun 4 06:15:26 2013] Set source signif. to 366.76/20.65 = 17.76 [Tue Jun 4 06:15:32 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 4 06:15:32 2013] Using photon index=1.80, rate=0.0366, arf fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29.arf [Tue Jun 4 06:15:32 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 4 06:15:32 2013] Updating source flux to 1.2e-13 [Tue Jun 4 06:15:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Jun 4 06:16:08 2013] xmm0675470301/analysis//spectral/fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete