[Mon Jun  3 10:20:25 2013] Detection parameters:
  Position = (431.4, 250.2) = 20 34 7.09 -35 53 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1631.0 +/- 47.7
  Background counts = 18.2
  Rate = 0.2 +/- 0.005

[Mon Jun  3 10:20:28 2013] Off-axis axis estimate = 10.25'
[Mon Jun  3 10:23:34 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 10:23:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 10:23:34 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Mon Jun  3 10:23:34 2013] source mask rpix=2.7, npix_max = 39, mask sum = 21, frac = 0.527
[Mon Jun  3 10:23:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.55"
[Mon Jun  3 13:50:50 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun  3 13:50:50 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun  3 13:50:50 2013] Fit fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jun  3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun  3 13:50:51 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun  3 13:50:51 2013] Fit fullrun_pn_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun  3 18:02:09 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.642954 pixels away
[Mon Jun  3 18:02:09 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:02:09 2013] Assessing source extent using major
[Mon Jun  3 18:02:09 2013] Source does appear to be extended
[Mon Jun  3 18:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 18:02:43 2013] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 18:02:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 18:02:43 2013] Initial guess for spatial extent in simple fitting = 11.55"
[Mon Jun  3 18:02:43 2013] source mask rpix=2.7, npix_max = 39, mask sum = 21, frac = 0.527
[Mon Jun  3 18:02:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.55"
[Mon Jun  3 20:40:05 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun  3 20:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1.csv
[Mon Jun  3 20:40:05 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun  3 20:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1.csv
[Mon Jun  3 20:40:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun  3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun  3 20:40:06 2013] fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun  3 20:40:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun  3 20:40:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 00:09:36 2013] Spatial fit model total counts = 2840.720000, observed total counts = 1775.000000
[Tue Jun  4 00:09:36 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 00:09:36 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 00:09:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 00:09:36 2013] Assessing source extent using major
[Tue Jun  4 00:09:36 2013] Source does appear to be extended
[Tue Jun  4 00:09:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 00:10:05 2013] Counts = 1630.992065, rescaling region sizes by 2.000000
[Tue Jun  4 00:10:05 2013] XMMSAS src. selection expression = ellipse(37479.038147, 21720.662674, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun  4 00:10:05 2013] Writing source region out to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun  4 00:10:05 2013] Extracting stamp from image fullrun_pn_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (356, 175) - (506, 325)
[Tue Jun  4 00:10:05 2013] XMMSAS bgd. selection expression = annulus(37479.038147, 21720.662674, 4350.000000, 8700.000000, X, Y) && !ellipse(28776.900848, 27275.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.708000, 26277.908000, 2484.168071, 2484.168071, 0.000000, X, Y) && !ellipse(28617.561920, 15746.638336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.635620, 28211.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.862152, 28359.453247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.574219, 28074.648254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.477448, 26924.298401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38616.606689, 26254.527435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.853790, 25972.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.488464, 25887.440430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.056610, 25619.093964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28660.012000, 25570.910000, 1242.168036, 1242.168036, 0.000000, X, Y) && !ellipse(28958.884521, 24913.907562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.124800, 24562.786000, 1260.072036, 1260.072036, 0.000000, X, Y)
[Tue Jun  4 00:10:05 2013] Writing fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1.gif
[Tue Jun  4 00:10:20 2013] Mean detx,y = (11161.02, 1729.21) 
[Tue Jun  4 00:10:25 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 00:12:47 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 00:12:48 2013] Setting source spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun  4 00:12:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jun  4 00:36:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  4 00:36:12 2013] rmf not generated due to insufficient counts
[Tue Jun  4 06:15:19 2013] Updating aperture counts using extracted products
[Tue Jun  4 06:15:19 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1976.00
[Tue Jun  4 06:15:20 2013] Total counts from fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 13445.00
[Tue Jun  4 06:15:20 2013] Got source and background scale factors 4713219.000000, 95284884.000000
[Tue Jun  4 06:15:20 2013] User source parameters:
  Position = (431.4, 250.2) = 20 34 7.09 -35 53 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1310.9 +/- 45.5
  Background aperture counts = 665.1
  Rate = 0.1 +/- 0.005

[Tue Jun  4 06:15:20 2013] Updating counts from extracted products
[Tue Jun  4 06:15:20 2013] Set source signif. to 1310.95/25.79 = 50.83
[Tue Jun  4 06:15:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 06:15:31 2013] Using photon index=1.80, rate=0.131, arf fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1.arf
[Tue Jun  4 06:15:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 06:15:31 2013] Updating source flux to 7.7e-13
[Tue Jun  4 06:15:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun  4 06:16:08 2013] xmm0675470301/analysis//spectral/fullrun_pn_xmm0675470301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete