[Mon Jun  3 10:21:35 2013] Detection parameters:
  Position = (326.2, 309.7) = 20 34 44.72 -35 49 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 17.4
  Background counts = 44.6
  Rate = 0.02 +/- 0.002

[Mon Jun  3 10:21:36 2013] Off-axis axis estimate = 2.18'
[Mon Jun  3 15:55:57 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 15:55:57 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Mon Jun  3 15:55:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.504
[Mon Jun  3 15:55:57 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.52"
[Mon Jun  3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  3 18:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  3 18:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3.csv
[Mon Jun  3 18:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:01:49 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  3 18:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 18:01:49 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  3 18:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun  3 18:01:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:02:27 2013] Spatial fit model total counts = 1154.810000, observed total counts = 973.000000
[Mon Jun  3 18:02:27 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 18:02:27 2013] Spatial fit model total counts = 1176.380000, observed total counts = 992.000000
[Mon Jun  3 18:02:27 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 18:02:27 2013] Spatial fit model total counts = 895.365000, observed total counts = 765.000000
[Mon Jun  3 18:02:27 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 18:02:27 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:02:27 2013] Assessing source extent using major
[Mon Jun  3 18:02:27 2013] Source does appear to be extended
[Mon Jun  3 18:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 18:02:27 2013] Source is confused with source 21
[Mon Jun  3 18:02:27 2013] Source is confused with source 13
[Mon Jun  3 22:04:20 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 22:04:20 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Mon Jun  3 22:04:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.504
[Mon Jun  3 22:04:20 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.52"
[Tue Jun  4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun  4 00:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3.csv
[Tue Jun  4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun  4 00:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3.csv
[Tue Jun  4 00:09:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun  4 00:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun  4 00:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  4 00:09:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 00:09:50 2013] Spatial fit model total counts = 1154.670000, observed total counts = 973.000000
[Tue Jun  4 00:09:50 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 00:09:50 2013] Spatial fit model total counts = 1173.020000, observed total counts = 992.000000
[Tue Jun  4 00:09:50 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 00:09:50 2013] Spatial fit model total counts = 894.879000, observed total counts = 765.000000
[Tue Jun  4 00:09:50 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 00:09:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 00:09:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 00:09:50 2013] Assessing source extent using major
[Tue Jun  4 00:09:50 2013] Source does appear to be extended
[Tue Jun  4 00:09:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 05:46:26 2013] XMMSAS src. selection expression = ellipse(28334.567657, 26896.370148, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  4 05:46:26 2013] Writing source region out to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun  4 05:46:26 2013] Extracting stamp from image fullrun_mos2_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (289, 272) - (364, 347)
[Tue Jun  4 05:46:27 2013] XMMSAS bgd. selection expression = annulus(28334.567657, 26896.370148, 1087.500000, 2175.000000, X, Y) && !ellipse(26742.326000, 26690.256000, 575.144017, 448.983213, 114.181500, X, Y) && !ellipse(27602.637146, 26497.969727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27798.474762, 25266.994598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.016000, 27424.246200, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(26886.667800, 25267.907600, 652.956819, 652.956819, 0.000000, X, Y) && !ellipse(28281.841431, 26461.882568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.946228, 27370.611481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.382000, 27745.186000, 1158.488033, 1158.488033, 0.000000, X, Y) && !ellipse(28009.002655, 25781.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.034546, 25886.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.000000, 27794.500183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.684204, 27448.719788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27326.694641, 27259.410889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.560516, 24560.231110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25696.939423, 25072.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.307281, 28344.993958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28329.618683, 28720.853180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.120453, 26788.488342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.301910, 24579.328735, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  4 05:46:27 2013] Writing fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3.gif
[Tue Jun  4 05:47:07 2013] Mean detx,y = (-769.63, 63.86) 
[Tue Jun  4 05:47:09 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 05:47:20 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 05:47:21 2013] Setting source spectrum file to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun  4 05:47:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun  4 05:58:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  4 05:58:06 2013] rmf not generated due to insufficient counts
[Tue Jun  4 06:15:38 2013] Updating aperture counts using extracted products
[Tue Jun  4 06:15:38 2013] Total counts from fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 651.00
[Tue Jun  4 06:15:38 2013] Total counts from fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1169.00
[Tue Jun  4 06:15:38 2013] Got source and background scale factors 1138904.000000, 4088780.000000
[Tue Jun  4 06:15:38 2013] User source parameters:
  Position = (326.2, 309.7) = 20 34 44.72 -35 49 4.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 325.4 +/- 26.5
  Background aperture counts = 325.6
  Rate = 0.03 +/- 0.002

[Tue Jun  4 06:15:38 2013] Updating counts from extracted products
[Tue Jun  4 06:15:38 2013] Set source signif. to 325.38/18.04 = 18.03
[Tue Jun  4 06:15:43 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 06:15:43 2013] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3.arf
[Tue Jun  4 06:15:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 06:15:43 2013] Updating source flux to 3e-13
[Tue Jun  4 06:15:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun  4 06:15:58 2013] xmm0675470301/analysis//spectral/fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete