[Mon Jun  3 10:21:36 2013] Detection parameters:
  Position = (296.5, 302.0) = 20 34 55.35 -35 49 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 13.1
  Background counts = 30.1
  Rate = 0.006 +/- 0.001

[Mon Jun  3 10:21:36 2013] Off-axis axis estimate = 0.29'
[Mon Jun  3 15:55:57 2013] Using EEF radius (= 6.57 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 15:55:57 2013] Initial guess for spatial extent in simple fitting = 6.57"
[Mon Jun  3 15:55:57 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Mon Jun  3 15:55:57 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 6.57"
[Mon Jun  3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jun  3 18:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19.csv
[Mon Jun  3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jun  3 18:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19.csv
[Mon Jun  3 18:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:01:49 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jun  3 18:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Jun  3 18:01:49 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jun  3 18:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon Jun  3 18:01:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:02:27 2013] Source 22 is offset by 6.513580 and 4.623026 pixels which is larger than
2 X fitted extent = 5.945242 x 5.945242, not incorporating fit results
[Mon Jun  3 18:02:27 2013] Source 22 is offset by 5.599373 and 6.258911 pixels which is larger than
2 X fitted extent = 0.780648 x 0.780648, not incorporating fit results
[Mon Jun  3 18:02:27 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:02:27 2013] Assessing source extent using major
[Mon Jun  3 18:02:27 2013] Source does appear to be extended
[Mon Jun  3 18:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 22:04:20 2013] Using EEF radius (= 6.57 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 22:04:20 2013] Initial guess for spatial extent in simple fitting = 6.57"
[Mon Jun  3 22:04:20 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Mon Jun  3 22:04:20 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 6.57"
[Tue Jun  4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jun  4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jun  4 00:09:20 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src16 appears to have run properly
[Tue Jun  4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jun  4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jun  4 00:09:21 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Jun  4 00:09:50 2013] Source 22 is offset by -5.523155 and -2.704617 pixels which is larger than
2 X fitted extent = 1.615113 x 4.523076, not incorporating fit results
[Tue Jun  4 00:09:50 2013] Spatial fit model total counts = 500.695000, observed total counts = 498.000000
[Tue Jun  4 00:09:50 2013] Offset between fit and detection position for source 22 = 0.727835 pixels
[Tue Jun  4 00:09:50 2013] Warning, changing simple spatial fit ID from 16 to 24
[Tue Jun  4 00:09:50 2013] 511.026800 total counts/ 488.805000 bgd. counts: snr = 1.005105
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.727835 pixels
  Position = (296.6, 302.7) = 20 34 55.32 -35 49 35.8
  Extent = 5.2 (2.9-13.7)", rotation angle = 0
  Source counts = 22.2 +/- 22.6
  Background counts = 488.8
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability