[Mon Jun 3 10:21:35 2013] Detection parameters: Position = (307.5, 304.9) = 20 34 51.41 -35 49 26.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2053.7 +/- 54.5 Background counts = 37.0 Rate = 0.2 +/- 0.005 [Mon Jun 3 10:21:36 2013] Off-axis axis estimate = 0.81' [Mon Jun 3 15:55:57 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting [Mon Jun 3 15:55:57 2013] Initial guess for spatial extent in simple fitting = 6.83" [Mon Jun 3 15:55:57 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.166 [Mon Jun 3 15:55:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 6.83" [Mon Jun 3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src1.ximg exists [Mon Jun 3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src1_1.ximg exists [Mon Jun 3 18:01:48 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_src1 appears to have run properly [Mon Jun 3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Mon Jun 3 18:01:48 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Mon Jun 3 18:01:48 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Mon Jun 3 18:02:27 2013] Warning, spatial fit 1 centroid is now closest to src. 15 [Mon Jun 3 18:02:27 2013] Source 2 is offset by -0.875303 and -2.694613 pixels which is larger than 2 X fitted extent = 0.801517 x 0.801517, not incorporating fit results [Mon Jun 3 18:02:27 2013] Source 2 is offset by -1.954981 and 2.959939 pixels which is larger than 2 X fitted extent = 6.508184 x 0.813522, not incorporating fit results [Mon Jun 3 18:02:27 2013] Spatial fit model total counts = 1365.520000, observed total counts = 1362.000000 [Mon Jun 3 18:02:27 2013] Offset between fit and detection position for source 2 = 2.481826 pixels [Mon Jun 3 18:02:27 2013] Warning, changing simple spatial fit ID from 1 to 21 [Mon Jun 3 18:02:27 2013] 1342.356000 total counts/ 1034.580000 bgd. counts: snr = 9.568695 Spatial fit parameters: Offset between fit and detection position for source 2 = 2.481826 pixels Position = (307.9, 307.3) = 20 34 51.27 -35 49 15.6 Extent = 7.2 (6.1-8.5)" x 5.6 (4.6-6.3)", rotation angle = 114 (91-146) degrees Source counts = 307.8 +/- 36.6 Background counts = 1034.6 Rate = 0.03 +/- 0.003 [Mon Jun 3 18:02:27 2013] Vigneting correction estimate = 1.000000 [Mon Jun 3 18:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 3 18:02:27 2013] Assessing source extent using major axis lower bound [Mon Jun 3 18:02:27 2013] Source does appear to be extended [Mon Jun 3 18:02:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97 [Mon Jun 3 18:02:27 2013] Source is confused with source 17 [Mon Jun 3 22:04:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Jun 3 22:04:20 2013] Initial guess for spatial extent in simple fitting = 6.40" [Mon Jun 3 22:04:20 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.029 [Mon Jun 3 22:04:20 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.40" [Tue Jun 4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src1.ximg exists [Tue Jun 4 00:09:20 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src1_1.ximg exists [Tue Jun 4 00:09:20 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_src1 appears to have run properly [Tue Jun 4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue Jun 4 00:09:21 2013] fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue Jun 4 00:09:21 2013] Fit fullrun_mos2_xmm0675470301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue Jun 4 00:09:50 2013] Warning, spatial fit 1 centroid is now closest to src. 17 [Tue Jun 4 00:09:50 2013] Spatial fit model total counts = 1788.430000, observed total counts = 1612.000000 [Tue Jun 4 00:09:50 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Tue Jun 4 00:09:50 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 00:09:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 00:09:50 2013] Assessing source extent using major axis lower bound [Tue Jun 4 00:09:50 2013] Source does appear to be extended [Tue Jun 4 00:09:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97 [Tue Jun 4 05:46:26 2013] XMMSAS src. selection expression = ellipse(26742.326000, 26690.256000, 431.358012, 336.737410, 114.181500, X, Y) [Tue Jun 4 05:46:26 2013] Writing source region out to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_src.reg [Tue Jun 4 05:46:26 2013] Extracting stamp from image fullrun_mos2_xmm0675470301_pi300-10000_cl_sm2.00.img.gz, (283, 283) - (333, 332) [Tue Jun 4 05:46:26 2013] XMMSAS bgd. selection expression = annulus(26742.326000, 26690.256000, 718.930021, 1437.860041, X, Y) && !ellipse(28334.567657, 26896.370148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.637146, 26497.969727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27798.474762, 25266.994598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.016000, 27424.246200, 1147.808033, 1147.808033, 0.000000, X, Y) && !ellipse(26886.667800, 25267.907600, 652.956819, 652.956819, 0.000000, X, Y) && !ellipse(28281.841431, 26461.882568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.946228, 27370.611481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.382000, 27745.186000, 1158.488033, 1158.488033, 0.000000, X, Y) && !ellipse(28009.002655, 25781.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.034546, 25886.909424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.000000, 27794.500183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.684204, 27448.719788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27326.694641, 27259.410889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.560516, 24560.231110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25696.939423, 25072.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.307281, 28344.993958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28329.618683, 28720.853180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.120453, 26788.488342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.301910, 24579.328735, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jun 4 05:46:26 2013] Writing fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2.gif [Tue Jun 4 05:46:32 2013] Mean detx,y = (648.45, -792.91) [Tue Jun 4 05:46:35 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 4 05:46:46 2013] Binned source spectrum to 10 counts/bin [Tue Jun 4 05:46:47 2013] Setting source spectrum file to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Tue Jun 4 05:46:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Tue Jun 4 06:15:37 2013] Updating aperture counts using extracted products [Tue Jun 4 06:15:37 2013] Total counts from fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1529.00 [Tue Jun 4 06:15:37 2013] Total counts from fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 103.00 [Tue Jun 4 06:15:37 2013] Got source and background scale factors 454400.000000, 257600.000000 [Tue Jun 4 06:15:37 2013] User source parameters: Position = (307.9, 307.3) = 20 34 51.27 -35 49 15.6 Extent = 7.2 (6.1-8.5)" x 5.6 (4.6-6.3)", rotation angle = 114 (91-146) degrees Source aperture counts = 1347.3 +/- 40.1 Background aperture counts = 181.7 Rate = 0.1 +/- 0.003 [Tue Jun 4 06:15:43 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 4 06:15:43 2013] Using photon index=1.80, rate=0.0265, arf fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2.arf [Tue Jun 4 06:15:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 4 06:15:43 2013] Updating source flux to 3.1e-13 [Tue Jun 4 06:15:53 2013] Flag b found in src. 2 procflags, skipping spectral fitting [Tue Jun 4 06:15:53 2013] Flag p found in src. 2 procflags, skipping spectral fitting [Tue Jun 4 06:15:53 2013] Flag c found in src. 2 procflags, skipping spectral fitting [Tue Jun 4 06:15:58 2013] xmm0675470301/analysis//spectral/fullrun_mos2_xmm0675470301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete