[Mon Jun  3 10:20:58 2013] Detection parameters:
  Position = (306.7, 498.3) = 20 34 51.73 -35 35 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.8 +/- 7.2
  Background counts = 4.4
  Rate = 0.003 +/- 0.0006

[Mon Jun  3 10:20:58 2013] Off-axis axis estimate = 14.50'
[Mon Jun  3 13:50:54 2013] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 13:50:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 13:50:54 2013] Initial guess for spatial extent in simple fitting = 13.68"
[Mon Jun  3 13:50:54 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.922
[Mon Jun  3 13:50:54 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.68"
[Mon Jun  3 15:55:56 2013] fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun  3 15:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26.csv
[Mon Jun  3 15:55:56 2013] fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun  3 15:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26.csv
[Mon Jun  3 15:55:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 15:55:57 2013] fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun  3 15:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun  3 15:55:57 2013] fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun  3 15:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun  3 15:55:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675470301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 18:02:17 2013] Spatial fit model total counts = 89.118500, observed total counts = 72.000000
[Mon Jun  3 18:02:17 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 18:02:17 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 18:02:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 18:02:17 2013] Assessing source extent using major
[Mon Jun  3 18:02:17 2013] Source does appear to be extended
[Mon Jun  3 18:02:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 18:02:17 2013] Deleting source due to low Poisson probability 0.9