[Tue Aug 28 23:44:14 2012] Detection parameters:
  Position = (452.4, 196.9) = 10 33 42.95 39 29 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.8 +/- 25.4
  Background counts = 52.4
  Rate = 0.01 +/- 0.0008

[Tue Aug 28 23:44:14 2012] Off-axis axis estimate = 13.37'
[Wed Aug 29 00:13:10 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:13:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 00:13:10 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Wed Aug 29 00:13:10 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.951
[Wed Aug 29 00:13:10 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.12"
[Wed Aug 29 00:22:00 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug 29 00:22:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2.csv
[Wed Aug 29 00:22:00 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug 29 00:22:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2.csv
[Wed Aug 29 00:22:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:22:01 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug 29 00:22:01 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug 29 00:22:01 2012] Fit fullrun_mos2_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Aug 29 00:22:03 2012] Spatial fit model total counts = 349.018000, observed total counts = 333.000000
[Wed Aug 29 00:22:03 2012] Offset between fit and detection position for source 1 = 0.386404 pixels
[Wed Aug 29 00:22:03 2012] 351.430000 total counts/ 164.605000 bgd. counts: snr = 14.561747
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.386404 pixels
  Position = (452.0, 196.9) = 10 33 43.10 39 29 24.4
  Extent = 7.7 (6.7-8.9)", rotation angle = 0
  Source counts = 186.8 +/- 18.7
  Background counts = 164.6
  Rate = 0.008 +/- 0.0008
[Wed Aug 29 00:22:03 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:22:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:22:03 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:22:03 2012] Source does appear to be extended
[Wed Aug 29 00:22:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:33:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:33:42 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Wed Aug 29 00:33:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Wed Aug 29 00:33:42 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.74"
[Wed Aug 29 00:47:13 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Aug 29 00:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2.csv
[Wed Aug 29 00:47:13 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Aug 29 00:47:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2.csv
[Wed Aug 29 00:47:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:47:13 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Aug 29 00:47:13 2012] fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Aug 29 00:47:13 2012] Fit fullrun_mos2_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Aug 29 00:47:16 2012] Spatial fit model total counts = 318.360000, observed total counts = 309.000000
[Wed Aug 29 00:47:16 2012] Offset between fit and detection position for source 1 = 0.039185 pixels
[Wed Aug 29 00:47:16 2012] 321.779000 total counts/ 135.197000 bgd. counts: snr = 16.046718
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.039185 pixels
  Position = (452.0, 196.9) = 10 33 43.11 39 29 24.3
  Extent = 7.7 (6.7-9.0)", rotation angle = 0
  Source counts = 186.6 +/- 17.9
  Background counts = 135.2
  Rate = 0.008 +/- 0.0007
[Wed Aug 29 00:47:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:47:16 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:47:16 2012] Source does appear to be extended
[Wed Aug 29 00:47:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 01:01:44 2012] XMMSAS src. selection expression = ellipse(39277.648780, 17078.554400, 463.647013, 463.647013, 0.000000, X, Y)
[Wed Aug 29 01:01:44 2012] Writing source region out to fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 29 01:01:44 2012] Extracting stamp from image fullrun_mos2_xmm0675440101_pi300-10000_cl_sm2.00.img.gz, (425, 170) - (479, 224)
[Wed Aug 29 01:01:44 2012] XMMSAS bgd. selection expression = annulus(39277.648780, 17078.554400, 772.745022, 1545.490044, X, Y)
[Wed Aug 29 01:01:44 2012] Writing fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1.gif
[Wed Aug 29 01:03:36 2012] Mean detx,y = (-8454.84, -14400.20) 
[Wed Aug 29 01:03:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 01:03:45 2012] grppha failed
[Wed Aug 29 01:03:45 2012] Setting source spectrum file to fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 01:03:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 29 01:04:49 2012] Updating aperture counts using extracted products
[Wed Aug 29 01:04:49 2012] Error reading totcts from fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 01:04:49 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 01:04:51 2012] Source 1 has no response, skipping
[Wed Aug 29 01:04:52 2012] xmm0675440101/analysis//spectral/fullrun_mos2_xmm0675440101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete