[Tue Aug 28 23:44:03 2012] Detection parameters:
  Position = (310.5, 330.3) = 10 34 36.28 39 39 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.5 +/- 22.7
  Background counts = 123.2
  Rate = 0.006 +/- 0.0009

[Tue Aug 28 23:44:03 2012] Off-axis axis estimate = 2.47'
[Wed Aug 29 00:07:50 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:07:50 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed Aug 29 00:07:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.831
[Wed Aug 29 00:07:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.66"
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3.csv
[Wed Aug 29 00:13:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 29 00:13:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:22:02 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.122879 pixels away
[Wed Aug 29 00:22:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:22:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:22:02 2012] Assessing source extent using major
[Wed Aug 29 00:22:02 2012] Source does appear to be extended
[Wed Aug 29 00:22:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:28:01 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:28:01 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed Aug 29 00:28:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.831
[Wed Aug 29 00:28:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.66"
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 29 00:33:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 29 00:33:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3.csv
[Wed Aug 29 00:33:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 29 00:33:42 2012] Fit fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 29 00:47:15 2012] Source 4 is offset by 6.445049 and 6.389348 pixels which is larger than
2 X fitted extent = 2.453710 x 2.453710, not incorporating fit results
[Wed Aug 29 00:47:15 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:47:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:47:15 2012] Assessing source extent using major
[Wed Aug 29 00:47:15 2012] Source does appear to be extended
[Wed Aug 29 00:47:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:59:13 2012] XMMSAS src. selection expression = ellipse(26964.713257, 28691.175262, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 29 00:59:13 2012] Writing source region out to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 29 00:59:13 2012] Extracting stamp from image fullrun_mos1_xmm0675440101_pi300-10000_cl_sm2.00.img.gz, (273, 293) - (348, 368)
[Wed Aug 29 00:59:13 2012] XMMSAS bgd. selection expression = annulus(26964.713257, 28691.175262, 1087.500000, 2175.000000, X, Y) && !ellipse(26381.737100, 27906.660000, 1268.661637, 1268.661637, 0.000000, X, Y)
[Wed Aug 29 00:59:13 2012] Writing fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4.gif
[Wed Aug 29 01:01:24 2012] Mean detx,y = (637.57, 322.12) 
[Wed Aug 29 01:01:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 01:01:42 2012] grppha failed
[Wed Aug 29 01:01:42 2012] Setting source spectrum file to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 29 01:01:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 29 01:01:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 29 01:01:43 2012] rmf not generated due to insufficient counts
[Wed Aug 29 01:04:49 2012] Updating aperture counts using extracted products
[Wed Aug 29 01:04:49 2012] Error reading totcts from fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4_src.pi.gz
[Wed Aug 29 01:04:49 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 01:04:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 01:04:51 2012] xmm0675440101/analysis//spectral/fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete