[Tue Aug 28 23:44:03 2012] Detection parameters:
  Position = (304.0, 321.2) = 10 34 38.73 39 38 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33214.4 +/- 214.4
  Background counts = 129.0
  Rate = 1 +/- 0.007

[Tue Aug 28 23:44:03 2012] Off-axis axis estimate = 1.70'
[Wed Aug 29 00:07:50 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:07:50 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Aug 29 00:07:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Aug 29 00:07:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 00:13:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 29 00:13:10 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 29 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 29 00:13:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:22:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.539973 pixels away
[Wed Aug 29 00:22:02 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:22:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:22:02 2012] Assessing source extent using major
[Wed Aug 29 00:22:02 2012] Source does appear to be extended
[Wed Aug 29 00:22:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:28:01 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 00:28:01 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Aug 29 00:28:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Aug 29 00:28:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 29 00:33:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 29 00:33:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 00:33:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 29 00:33:42 2012] fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 29 00:33:42 2012] Fit fullrun_mos1_xmm0675440101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 29 00:47:15 2012] Spatial fit model total counts = 22029.400000, observed total counts = 21945.000000
[Wed Aug 29 00:47:15 2012] Offset between fit and detection position for source 1 = 0.223579 pixels
[Wed Aug 29 00:47:15 2012] 22019.840000 total counts/ 4565.940000 bgd. counts: snr = 258.301771
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223579 pixels
  Position = (303.8, 321.3) = 10 34 38.80 39 38 26.6
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 17453.9 +/- 148.4
  Background counts = 4565.9
  Rate = 0.7 +/- 0.006
[Wed Aug 29 00:47:15 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 00:47:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 00:47:15 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 00:47:15 2012] Source does appear to be extended
[Wed Aug 29 00:47:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 00:59:13 2012] Counts = 17453.900000, rescaling region sizes by 3.000000
[Wed Aug 29 00:59:13 2012] XMMSAS src. selection expression = ellipse(26381.737100, 27906.660000, 951.496227, 951.496227, 0.000000, X, Y)
[Wed Aug 29 00:59:13 2012] Writing source region out to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 29 00:59:13 2012] Extracting stamp from image fullrun_mos1_xmm0675440101_pi300-10000_cl_sm2.00.img.gz, (249, 267) - (358, 376)
[Wed Aug 29 00:59:13 2012] XMMSAS bgd. selection expression = annulus(26381.737100, 27906.660000, 4757.481137, 9514.962274, X, Y) && !ellipse(21744.388016, 20473.128128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.713257, 28691.175262, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 00:59:13 2012] Writing fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1.gif
[Wed Aug 29 00:59:16 2012] Mean detx,y = (307.51, -245.60) 
[Wed Aug 29 00:59:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 01:01:06 2012] grppha failed
[Wed Aug 29 01:01:06 2012] Setting source spectrum file to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 01:01:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 29 01:04:49 2012] Updating aperture counts using extracted products
[Wed Aug 29 01:04:49 2012] Error reading totcts from fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 01:04:49 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 01:04:50 2012] Source 1 has no response, skipping
[Wed Aug 29 01:04:51 2012] xmm0675440101/analysis//spectral/fullrun_mos1_xmm0675440101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete