[Mon Jul  9 04:49:03 2012] Detection parameters:
  Position = (340.9, 283.1) = 12 25 46.85 12 39 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79667.7 +/- 340.9
  Background counts = 313.0
  Rate = 2 +/- 0.01

[Mon Jul  9 04:49:04 2012] Off-axis axis estimate = 3.27'
[Mon Jul  9 04:54:31 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 04:54:31 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Mon Jul  9 04:54:31 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.722
[Mon Jul  9 04:54:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.07"
[Mon Jul  9 05:55:15 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 05:55:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 05:55:15 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 05:55:15 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 05:55:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 05:55:15 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 05:55:15 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 05:55:15 2012] Fit fullrun_pn_xmm0675140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul  9 06:44:52 2012] Spatial fit model total counts = 53069.100000, observed total counts = 56769.000000
[Mon Jul  9 06:44:52 2012] Offset between fit and detection position for source 1 = 0.054764 pixels
[Mon Jul  9 06:44:52 2012] 54242.070000 total counts/ 5116.370000 bgd. counts: snr = 686.796036
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.054764 pixels
  Position = (340.9, 283.2) = 12 25 46.87 12 39 42.0
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 49125.7 +/- 232.9
  Background counts = 5116.4
  Rate = 2 +/- 0.009
[Mon Jul  9 06:44:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 06:44:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 06:44:52 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 06:44:52 2012] Source does appear to be extended
[Mon Jul  9 06:44:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 06:45:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 06:45:05 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Mon Jul  9 06:45:05 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795
[Mon Jul  9 06:45:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.58"
[Mon Jul  9 09:26:52 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 09:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 09:26:52 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 09:26:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 09:26:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 09:26:53 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 09:26:53 2012] fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 09:26:53 2012] Fit fullrun_pn_xmm0675140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 10:44:30 2012] Warning, spatial fit 1 centroid is now closest to src. 20
[Mon Jul  9 10:44:30 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 10:44:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 10:44:30 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 10:44:30 2012] Source does appear to be extended
[Mon Jul  9 10:44:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 10:44:44 2012] Counts = 49125.700000, rescaling region sizes by 3.000000
[Mon Jul  9 10:44:44 2012] XMMSAS src. selection expression = ellipse(29607.207880, 24586.767000, 1365.229840, 1365.229840, 0.000000, X, Y)
[Mon Jul  9 10:44:44 2012] Writing source region out to fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 10:44:44 2012] Extracting stamp from image fullrun_pn_xmm0675140101_pi300-10000_cl_sm2.00.img.gz, (262, 205) - (419, 362)
[Mon Jul  9 10:44:44 2012] XMMSAS bgd. selection expression = annulus(29607.207880, 24586.767000, 6826.149200, 13652.298401, X, Y) && !ellipse(37982.492767, 35684.888824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24329.336487, 11490.715317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16571.897110, 34137.519165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26557.941528, 31620.684143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38333.583221, 31588.300751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26340.298157, 14090.083252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30769.471130, 26842.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31071.828522, 25692.436493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31852.404480, 25092.365356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.645477, 24931.159943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30521.118000, 22659.632000, 1373.848040, 1373.848040, 0.000000, X, Y) && !ellipse(37110.305023, 22637.554474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.109924, 22526.858337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29543.396540, 20520.146400, 400.468622, 400.468622, 0.000000, X, Y) && !ellipse(31232.871000, 20498.348200, 567.980816, 567.980816, 0.000000, X, Y) && !ellipse(16047.884598, 19553.950348, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 10:44:44 2012] Writing fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 10:45:13 2012] Mean detx,y = (1862.80, 4063.24) 
[Mon Jul  9 10:45:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 10:53:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 10:53:16 2012] Setting source spectrum file to fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 10:53:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 12:48:11 2012] Updating aperture counts using extracted products
[Mon Jul  9 12:48:11 2012] Error reading totcts from fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 12:48:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 12:48:12 2012] Using photon index=1.80, rate=1.8, arf fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 12:48:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 12:48:12 2012] Updating source flux to 4.7e-12
[Mon Jul  9 12:59:05 2012] Reading fit data from xmm0675140101/analysis//spectral/fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 12:59:05 2012] Spectral fit parameter nH value = 2.10171e+23
[Mon Jul  9 12:59:05 2012] Spectral fit parameter PhoIndex value = 1.66783
[Mon Jul  9 12:59:05 2012] Failed to get F(0.3-8.0) from xmm0675140101/analysis//spectral/fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 12:59:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 12:59:05 2012] Using Nh = 2.1e+23, photon index=1.67, rate=1.8, arf fullrun_pn_xmm0675140101_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 12:59:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 12:59:05 2012] Updating source flux to 2.2e-11