[Wed Jun 19 02:09:23 2013] Detection parameters:
  Position = (243.1, 330.9) = 8 20 8.27 -47 38 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.8 +/- 25.1
  Background counts = 233.5
  Rate = 0.006 +/- 0.001

[Wed Jun 19 02:09:26 2013] Off-axis axis estimate = 4.65'
[Wed Jun 19 02:16:17 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 02:16:17 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 19 02:16:17 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Wed Jun 19 02:16:17 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.75"
[Wed Jun 19 06:47:38 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51.ximg exists
[Wed Jun 19 06:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51.csv
[Wed Jun 19 06:47:38 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Jun 19 06:47:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51.csv
[Wed Jun 19 06:47:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 06:47:42 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Jun 19 06:47:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 19 06:47:42 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jun 19 06:47:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 19 06:47:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675080101_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:34:10 2013] Source 54 is offset by 2.012424 and -5.820322 pixels which is larger than
2 X fitted extent = 1.521651 x 1.521651, not incorporating fit results
[Wed Jun 19 08:34:10 2013] Source 54 is offset by 2.199306 and -5.682276 pixels which is larger than
2 X fitted extent = 1.006055 x 2.598460, not incorporating fit results
[Wed Jun 19 08:34:10 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 08:34:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 08:34:10 2013] Assessing source extent using major
[Wed Jun 19 08:34:10 2013] Source does appear to be extended
[Wed Jun 19 08:34:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 08:34:10 2013] Source is confused with source 52
[Wed Jun 19 08:34:36 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 08:34:36 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed Jun 19 08:34:36 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Wed Jun 19 08:34:36 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 8.75"
[Wed Jun 19 13:01:23 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47.ximg exists
[Wed Jun 19 13:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47.csv
[Wed Jun 19 13:01:23 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed Jun 19 13:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47.csv
[Wed Jun 19 13:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 13:01:25 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed Jun 19 13:01:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed Jun 19 13:01:25 2013] fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed Jun 19 13:01:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Wed Jun 19 13:01:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675080101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 14:35:36 2013] Source 54 is offset by 2.184723 and -5.794023 pixels which is larger than
2 X fitted extent = 1.014303 x 2.698915, not incorporating fit results
[Wed Jun 19 14:35:36 2013] Source 54 is offset by 2.012424 and -5.767794 pixels which is larger than
2 X fitted extent = 1.342400 x 1.342400, not incorporating fit results
[Wed Jun 19 14:35:36 2013] Source 54 is offset by 2.201674 and -5.689817 pixels which is larger than
2 X fitted extent = 1.006055 x 2.662101, not incorporating fit results
[Wed Jun 19 14:35:36 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 14:35:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 14:35:36 2013] Assessing source extent using major
[Wed Jun 19 14:35:36 2013] Source does appear to be extended
[Wed Jun 19 14:35:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 14:36:00 2013] XMMSAS src. selection expression = ellipse(21104.622864, 28738.317963, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 14:36:00 2013] Writing source region out to fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_src.reg
[Wed Jun 19 14:36:00 2013] Extracting stamp from image fullrun_pn_xmm0675080101_pi300-10000_cl_sm2.00.img.gz, (206, 293) - (281, 368)
[Wed Jun 19 14:36:00 2013] XMMSAS bgd. selection expression = annulus(21104.622864, 28738.317963, 1087.500000, 2175.000000, X, Y) && !ellipse(23049.909729, 26459.907227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23364.538666, 25795.215332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23260.820000, 30483.518800, 1373.792040, 1222.064035, 291.380000, X, Y) && !ellipse(22667.788000, 30103.084000, 1981.928057, 1981.928057, 0.000000, X, Y) && !ellipse(21442.391708, 29528.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22300.000600, 29433.524200, 1366.296039, 615.628818, 299.561000, X, Y) && !ellipse(20201.462875, 28993.466278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21651.746078, 28750.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22315.260600, 28903.323380, 1334.192038, 1334.192038, 0.000000, X, Y) && !ellipse(20784.744934, 27533.107239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22103.377182, 27752.083435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23001.237732, 25964.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22165.247330, 25817.007812, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 14:36:00 2013] Writing fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54.gif
[Wed Jun 19 15:16:46 2013] Mean detx,y = (-5521.15, -1791.15) 
[Wed Jun 19 15:16:50 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 15:17:10 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 15:17:11 2013] Setting source spectrum file to fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Jun 19 15:17:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed Jun 19 16:39:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 16:39:38 2013] rmf not generated due to insufficient counts
[Wed Jun 19 18:11:26 2013] Updating aperture counts using extracted products
[Wed Jun 19 18:11:26 2013] Total counts from fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 1864.00
[Wed Jun 19 18:11:27 2013] Total counts from fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 2569.00
[Wed Jun 19 18:11:27 2013] Got source and background scale factors 1057146.000000, 2228312.000000
[Wed Jun 19 18:11:27 2013] User source parameters:
  Position = (243.1, 330.9) = 8 20 8.27 -47 38 30.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 645.2 +/- 44.2
  Background aperture counts = 1218.8
  Rate = 0.02 +/- 0.001

[Wed Jun 19 18:11:27 2013] Updating counts from extracted products
[Wed Jun 19 18:11:27 2013] Set source signif. to 645.23/34.91 = 18.48
[Wed Jun 19 18:11:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 18:11:38 2013] Using photon index=1.80, rate=0.0219, arf fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54.arf
[Wed Jun 19 18:11:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 18:11:38 2013] Updating source flux to 1.5e-13
[Wed Jun 19 18:12:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 18:12:20 2013] xmm0675080101/analysis//spectral/fullrun_pn_xmm0675080101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete