[Thu May 23 17:17:03 2013] Detection parameters:
  Position = (404.6, 373.7) = 20 56 7.81 -54 54 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 14.6
  Background counts = 66.2
  Rate = 0.003 +/- 0.0007

[Thu May 23 17:17:03 2013] Off-axis axis estimate = 9.43'
[Thu May 23 17:19:55 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 23 17:19:55 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 23 17:19:55 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.120
[Thu May 23 17:19:55 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 11.15"
[Thu May 23 19:19:12 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_src35.ximg exists
[Thu May 23 19:19:12 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu May 23 19:19:12 2013] Fit fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_src35 appears to have run properly
[Thu May 23 19:19:12 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu May 23 19:19:12 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May 23 19:19:12 2013] Fit fullrun_pn_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu May 23 22:51:04 2013] Source 37 is offset by 6.455688 and -4.079992 pixels which is larger than
2 X fitted extent = 1.730952 x 1.730952, not incorporating fit results
[Thu May 23 22:51:04 2013] Spatial fit model total counts = 1538.020000, observed total counts = 1536.000000
[Thu May 23 22:51:04 2013] Offset between fit and detection position for source 37 = 3.178390 pixels
[Thu May 23 22:51:04 2013] Warning, changing simple spatial fit ID from 35 to 36
[Thu May 23 22:51:04 2013] 1570.454000 total counts/ 1335.940000 bgd. counts: snr = 6.416162
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 3.178390 pixels
  Position = (402.0, 371.8) = 20 56 9.08 -54 55 8.9
  Extent = 22.4 (22.4-44.9)" x 12.1 (6.9-21.2)", rotation angle = 108 (90-132) degrees
  Source counts = 234.5 +/- 39.6
  Background counts = 1335.9
  Rate = 0.006 +/- 0.001
[Thu May 23 22:51:04 2013] Vigneting correction estimate = 1.000000
[Thu May 23 22:51:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 22:51:04 2013] Assessing source extent using major axis lower bound
[Thu May 23 22:51:04 2013] Source does appear to be extended
[Thu May 23 22:51:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Thu May 23 22:51:04 2013] Source is confused with source 40
[Thu May 23 22:51:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 22:51:35 2013] Initial guess for spatial extent in simple fitting = 17.26"
[Thu May 23 22:51:35 2013] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.014
[Thu May 23 22:51:35 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 17.26"
[Fri May 24 01:38:07 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 24 01:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35.csv
[Fri May 24 01:38:07 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 24 01:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35.csv
[Fri May 24 01:38:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 01:38:08 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 24 01:38:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 24 01:38:08 2013] fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 24 01:38:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri May 24 01:38:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 06:18:15 2013] Warning, spatial fit 35 centroid is now closest to src. 21
[Fri May 24 06:18:15 2013] Vigneting correction estimate = 1.000000
[Fri May 24 06:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 06:18:15 2013] Assessing source extent using major axis lower bound
[Fri May 24 06:18:15 2013] Source does appear to be extended
[Fri May 24 06:18:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Fri May 24 06:19:04 2013] XMMSAS src. selection expression = ellipse(34929.624000, 32297.515940, 1346.040039, 725.388021, 108.031000, X, Y)
[Fri May 24 06:19:04 2013] Writing source region out to fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_src.reg
[Fri May 24 06:19:04 2013] Extracting stamp from image fullrun_pn_xmm0675010901_pi300-10000_cl_sm2.00.img.gz, (325, 294) - (479, 449)
[Fri May 24 06:19:04 2013] XMMSAS bgd. selection expression = annulus(34929.624000, 32297.515940, 2243.400065, 4486.800129, X, Y) && !ellipse(37426.842000, 32150.408000, 1983.184057, 1983.184057, 0.000000, X, Y) && !ellipse(30564.954224, 35469.475677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37130.145200, 29222.600200, 423.272012, 423.272012, 0.000000, X, Y) && !ellipse(36595.033000, 30325.334000, 1795.552052, 1795.552052, 0.000000, X, Y) && !ellipse(38319.285889, 33069.846924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39825.162750, 30013.106384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37894.377655, 29454.615662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33183.453760, 32870.574000, 638.731218, 264.902408, 75.647715, X, Y) && !ellipse(39088.081482, 32080.476807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34308.440000, 31375.992000, 1119.008032, 1119.008032, 0.000000, X, Y) && !ellipse(34474.291046, 30813.972076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34699.276000, 30315.820000, 1686.000049, 1686.000049, 0.000000, X, Y) && !ellipse(38512.824249, 30063.222717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34753.958557, 29889.182892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31573.491600, 29686.098400, 407.876812, 407.876812, 0.000000, X, Y) && !ellipse(35442.466064, 29461.593079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35833.368683, 29022.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30594.642761, 27474.091248, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 06:19:04 2013] Writing fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37.gif
[Fri May 24 06:57:07 2013] Mean detx,y = (4168.83, -8256.74) 
[Fri May 24 06:57:12 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 06:58:27 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 06:58:27 2013] Setting source spectrum file to fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Fri May 24 06:58:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Fri May 24 10:24:05 2013] Updating aperture counts using extracted products
[Fri May 24 10:24:05 2013] Total counts from fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 1506.00
[Fri May 24 10:24:05 2013] Total counts from fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_bgd.pi.gz = 7345.00
[Fri May 24 10:24:05 2013] Got source and background scale factors 2720623.000000, 26599832.000000
[Fri May 24 10:24:05 2013] User source parameters:
  Position = (402.0, 371.8) = 20 56 9.08 -54 55 8.9
  Extent = 22.4 (22.4-44.9)" x 12.1 (6.9-21.2)", rotation angle = 108 (90-132) degrees
  Source aperture counts = 754.8 +/- 39.8
  Background aperture counts = 751.2
  Rate = 0.02 +/- 0.001

[Fri May 24 10:24:13 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 10:24:13 2013] Using photon index=1.80, rate=0.00609, arf fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37.arf
[Fri May 24 10:24:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 10:24:13 2013] Updating source flux to 2.5e-14
[Fri May 24 10:24:44 2013] Flag b found in src. 37 procflags, skipping spectral fitting
[Fri May 24 10:24:44 2013] Flag c found in src. 37 procflags, skipping spectral fitting
[Fri May 24 10:24:52 2013] xmm0675010901/analysis//spectral/fullrun_pn_xmm0675010901_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete