[Thu May 23 17:17:32 2013] Detection parameters:
  Position = (508.4, 318.0) = 20 55 15.26 -54 58 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.2 +/- 10.4
  Background counts = 12.5
  Rate = 0.001 +/- 0.0002

[Thu May 23 17:17:33 2013] Off-axis axis estimate = 15.29'
[Thu May 23 19:19:13 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Thu May 23 19:19:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 19:19:13 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Thu May 23 19:19:13 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.004
[Thu May 23 19:19:13 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 14.07"
[Thu May 23 21:00:31 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_src43.ximg exists
[Thu May 23 21:00:31 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu May 23 21:00:31 2013] Fit fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_src43 appears to have run properly
[Thu May 23 21:00:32 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu May 23 21:00:32 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu May 23 21:00:32 2013] Fit fullrun_mos1_xmm0675010901_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Thu May 23 22:51:13 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.954072 pixels away
[Thu May 23 22:51:13 2013] Vigneting correction estimate = 1.000000
[Thu May 23 22:51:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 22:51:13 2013] Assessing source extent using major
[Thu May 23 22:51:13 2013] Source does appear to be extended
[Thu May 23 22:51:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 01:38:09 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Fri May 24 01:38:09 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Fri May 24 01:38:09 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.004
[Fri May 24 01:38:09 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 14.07"
[Fri May 24 03:45:20 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38.ximg exists
[Fri May 24 03:45:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38.csv
[Fri May 24 03:45:20 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri May 24 03:45:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38.csv
[Fri May 24 03:45:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 03:45:21 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri May 24 03:45:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 24 03:45:21 2013] fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri May 24 03:45:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 24 03:45:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0675010901_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 06:18:26 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.749129 pixels away
[Fri May 24 06:18:26 2013] Vigneting correction estimate = 1.000000
[Fri May 24 06:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 06:18:26 2013] Assessing source extent using major
[Fri May 24 06:18:26 2013] Source does appear to be extended
[Fri May 24 06:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 08:22:33 2013] XMMSAS src. selection expression = ellipse(44179.458588, 27618.928406, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 08:22:33 2013] Writing source region out to fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_src.reg
[Fri May 24 08:22:33 2013] Extracting stamp from image fullrun_mos1_xmm0675010901_pi300-10000_cl_sm2.00.img.gz, (471, 281) - (546, 356)
[Fri May 24 08:22:33 2013] XMMSAS bgd. selection expression = annulus(44179.458588, 27618.928406, 1087.500000, 2175.000000, X, Y) && !ellipse(42435.728271, 26400.068176, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 08:22:33 2013] Writing fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26.gif
[Fri May 24 08:44:53 2013] Mean detx,y = (8713.27, 13889.19) 
[Fri May 24 08:44:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 08:45:18 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 08:45:18 2013] Setting source spectrum file to fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 24 08:45:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 24 09:10:18 2013] Not generating rmf since there are only 49 counts
[Fri May 24 09:10:18 2013] rmf not generated due to insufficient counts
[Fri May 24 10:24:21 2013] Updating aperture counts using extracted products
[Fri May 24 10:24:21 2013] Total counts from fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 128.00
[Fri May 24 10:24:21 2013] Total counts from fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_bgd.pi.gz = 383.00
[Fri May 24 10:24:21 2013] Got source and background scale factors 1344356.000000, 5715949.000000
[Fri May 24 10:24:21 2013] User source parameters:
  Position = (508.4, 318.0) = 20 55 15.26 -54 58 59.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.9 +/- 12.3
  Background aperture counts = 90.1
  Rate = 0.0009 +/- 0.0003

[Fri May 24 10:24:21 2013] Updating counts from extracted products
[Fri May 24 10:24:21 2013] Set source signif. to 37.92/9.49 = 4.00
[Fri May 24 10:24:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 10:24:22 2013] Using photon index=1.80, rate=0.000905, arf fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26.arf
[Fri May 24 10:24:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 10:24:22 2013] Updating source flux to 2.2e-14
[Fri May 24 10:24:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 10:24:37 2013] xmm0675010901/analysis//spectral/fullrun_mos1_xmm0675010901_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete