[Thu May 30 08:20:02 2013] Detection parameters:
  Position = (277.4, 319.6) = 3 44 43.12 -54 50 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.7 +/- 15.5
  Background counts = 45.8
  Rate = 0.003 +/- 0.0005

[Thu May 30 08:20:03 2013] Off-axis axis estimate = 2.16'
[Thu May 30 08:24:04 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu May 30 08:24:04 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Thu May 30 08:24:04 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.261
[Thu May 30 08:24:04 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 7.51"
[Thu May 30 11:21:23 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47.ximg exists
[Thu May 30 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47.csv
[Thu May 30 11:21:23 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu May 30 11:21:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47.csv
[Thu May 30 11:21:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 11:21:25 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu May 30 11:21:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu May 30 11:21:25 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu May 30 11:21:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47.csv
[Thu May 30 11:21:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 13:56:24 2013] Warning, spatial fit 47 centroid is now closest to src. 49
[Thu May 30 13:56:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 13:56:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 13:56:25 2013] Assessing source extent using major
[Thu May 30 13:56:25 2013] Source does appear to be extended
[Thu May 30 13:56:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 13:57:11 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu May 30 13:57:11 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Thu May 30 13:57:11 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.261
[Thu May 30 13:57:11 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 7.51"
[Thu May 30 16:37:25 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46.ximg exists
[Thu May 30 16:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46.csv
[Thu May 30 16:37:25 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu May 30 16:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46.csv
[Thu May 30 16:37:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 16:37:26 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu May 30 16:37:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu May 30 16:37:26 2013] fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu May 30 16:37:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu May 30 16:37:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 19:02:55 2013] Source 47 is offset by -3.011980 and -6.563105 pixels which is larger than
2 X fitted extent = 0.863903 x 0.863903, not incorporating fit results
[Thu May 30 19:02:55 2013] Vigneting correction estimate = 1.000000
[Thu May 30 19:02:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 19:02:55 2013] Assessing source extent using major
[Thu May 30 19:02:55 2013] Source does appear to be extended
[Thu May 30 19:02:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 19:03:42 2013] XMMSAS src. selection expression = ellipse(24085.227783, 27757.921844, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 19:03:42 2013] Writing source region out to fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_src.reg
[Thu May 30 19:03:42 2013] Extracting stamp from image fullrun_pn_xmm0675010701_pi300-10000_cl_sm2.00.img.gz, (240, 282) - (315, 357)
[Thu May 30 19:03:42 2013] XMMSAS bgd. selection expression = annulus(24085.227783, 27757.921844, 1087.500000, 2175.000000, X, Y) && !ellipse(22664.707660, 30284.656800, 422.478412, 422.478412, 0.000000, X, Y) && !ellipse(23370.448761, 27440.438751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23090.173600, 25527.426400, 956.312028, 956.312028, 0.000000, X, Y)
[Thu May 30 19:03:42 2013] Writing fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47.gif
[Thu May 30 19:35:08 2013] Mean detx,y = (-3210.97, 2861.64) 
[Thu May 30 19:35:11 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 19:35:32 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 19:35:33 2013] Setting source spectrum file to fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu May 30 19:35:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Thu May 30 20:26:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 20:26:17 2013] rmf not generated due to insufficient counts
[Thu May 30 21:44:09 2013] Updating aperture counts using extracted products
[Thu May 30 21:44:09 2013] Total counts from fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 362.00
[Thu May 30 21:44:09 2013] Total counts from fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_bgd.pi.gz = 1871.00
[Thu May 30 21:44:09 2013] Got source and background scale factors 1148324.000000, 8240314.000000
[Thu May 30 21:44:09 2013] User source parameters:
  Position = (277.4, 319.6) = 3 44 43.12 -54 50 21.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.3 +/- 20.0
  Background aperture counts = 260.7
  Rate = 0.002 +/- 0.0004

[Thu May 30 21:44:09 2013] Updating counts from extracted products
[Thu May 30 21:44:09 2013] Set source signif. to 101.27/16.15 = 6.27
[Thu May 30 21:44:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 21:44:19 2013] Using photon index=1.80, rate=0.00212, arf fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47.arf
[Thu May 30 21:44:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 21:44:19 2013] Updating source flux to 6.9e-15
[Thu May 30 21:44:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 21:44:50 2013] xmm0675010701/analysis//spectral/fullrun_pn_xmm0675010701_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete