[Thu May 30 08:21:19 2013] Detection parameters:
  Position = (211.3, 260.2) = 3 45 16.49 -54 54 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 11.1
  Background counts = 17.0
  Rate = 0.002 +/- 0.0004

[Thu May 30 08:21:20 2013] Off-axis axis estimate = 6.90'
[Thu May 30 12:13:11 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Thu May 30 12:13:11 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Thu May 30 12:13:11 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.879
[Thu May 30 12:13:11 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.88"
[Thu May 30 13:56:01 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17.ximg exists
[Thu May 30 13:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17.csv
[Thu May 30 13:56:01 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May 30 13:56:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17.csv
[Thu May 30 13:56:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 13:56:02 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May 30 13:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 30 13:56:02 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May 30 13:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 30 13:56:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675010701_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 13:56:46 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.625460 pixels away
[Thu May 30 13:56:46 2013] Vigneting correction estimate = 1.000000
[Thu May 30 13:56:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 13:56:46 2013] Assessing source extent using major
[Thu May 30 13:56:46 2013] Source does appear to be extended
[Thu May 30 13:56:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 17:26:20 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Thu May 30 17:26:20 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Thu May 30 17:26:20 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.879
[Thu May 30 17:26:20 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.88"
[Thu May 30 19:02:30 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17.ximg exists
[Thu May 30 19:02:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17.csv
[Thu May 30 19:02:30 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May 30 19:02:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17.csv
[Thu May 30 19:02:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 19:02:30 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May 30 19:02:30 2013] fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May 30 19:02:30 2013] Fit fullrun_mos2_xmm0675010701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu May 30 19:03:17 2013] Spatial fit model total counts = 237.144000, observed total counts = 216.000000
[Thu May 30 19:03:17 2013] Offset between fit and detection position for source 24 = 0.582964 pixels
[Thu May 30 19:03:17 2013] 234.801400 total counts/ 190.981000 bgd. counts: snr = 3.170891
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.582964 pixels
  Position = (211.5, 260.7) = 3 45 16.37 -54 54 37.7
  Extent = 4.2 (2.8-5.9)", rotation angle = 0
  Source counts = 43.8 +/- 15.3
  Background counts = 191.0
  Rate = 0.0008 +/- 0.0003
[Thu May 30 19:03:17 2013] Vigneting correction estimate = 1.000000
[Thu May 30 19:03:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 19:03:17 2013] Assessing source extent using major axis lower bound
[Thu May 30 19:03:17 2013] Source does appear to be extended
[Thu May 30 19:03:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 21:13:26 2013] XMMSAS src. selection expression = ellipse(18355.491400, 22634.926600, 250.925407, 250.925407, 0.000000, X, Y)
[Thu May 30 21:13:26 2013] Writing source region out to fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_src.reg
[Thu May 30 21:13:26 2013] Extracting stamp from image fullrun_mos2_xmm0675010701_pi300-10000_cl_sm2.00.img.gz, (197, 246) - (226, 275)
[Thu May 30 21:13:26 2013] XMMSAS bgd. selection expression = annulus(18355.491400, 22634.926600, 418.209012, 836.418024, X, Y) && !ellipse(19285.619812, 22454.920319, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 21:13:26 2013] Writing fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24.gif
[Thu May 30 21:20:01 2013] Mean detx,y = (-291.65, -9752.98) 
[Thu May 30 21:20:02 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 21:20:13 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 21:20:13 2013] Setting source spectrum file to fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu May 30 21:20:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu May 30 21:39:24 2013] Not generating rmf since there are only 43 counts
[Thu May 30 21:39:24 2013] rmf not generated due to insufficient counts
[Thu May 30 21:44:28 2013] Updating aperture counts using extracted products
[Thu May 30 21:44:28 2013] Total counts from fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 66.00
[Thu May 30 21:44:29 2013] Total counts from fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_bgd.pi.gz = 98.00
[Thu May 30 21:44:29 2013] Got source and background scale factors 178708.000000, 996292.000000
[Thu May 30 21:44:29 2013] User source parameters:
  Position = (211.5, 260.7) = 3 45 16.37 -54 54 37.7
  Extent = 4.2 (2.8-5.9)", rotation angle = 0
  Source aperture counts = 48.4 +/- 9.2
  Background aperture counts = 17.6
  Rate = 0.0009 +/- 0.0002

[Thu May 30 21:44:36 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 21:44:36 2013] Using photon index=1.80, rate=0.000849, arf fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24.arf
[Thu May 30 21:44:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 21:44:36 2013] Updating source flux to 3.7e-14
[Thu May 30 21:44:41 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 21:44:43 2013] xmm0675010701/analysis//spectral/fullrun_mos2_xmm0675010701_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete