[Tue May 28 14:30:45 2013] Detection parameters:
  Position = (248.7, 328.4) = 21 37 10.08 -63 4 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1361.2 +/- 48.0
  Background counts = 269.7
  Rate = 0.02 +/- 0.0008

[Tue May 28 14:30:46 2013] Off-axis axis estimate = 4.21'
[Tue May 28 14:34:47 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Tue May 28 14:34:47 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Tue May 28 14:34:47 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.908
[Tue May 28 14:34:47 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.53"
[Tue May 28 17:00:38 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22.ximg exists
[Tue May 28 17:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22.csv
[Tue May 28 17:00:38 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue May 28 17:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22.csv
[Tue May 28 17:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 17:00:39 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue May 28 17:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May 28 17:00:39 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May 28 17:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue May 28 17:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 18:25:07 2013] Source 22 is offset by 3.958313 and -7.912740 pixels which is larger than
2 X fitted extent = 6.703862 x 6.782529, not incorporating fit results
[Tue May 28 18:25:07 2013] Vigneting correction estimate = 1.000000
[Tue May 28 18:25:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 18:25:07 2013] Assessing source extent using major
[Tue May 28 18:25:07 2013] Source does appear to be extended
[Tue May 28 18:25:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 18:25:24 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Tue May 28 18:25:24 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Tue May 28 18:25:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.908
[Tue May 28 18:25:24 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 8.53"
[Tue May 28 20:40:23 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22.ximg exists
[Tue May 28 20:40:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22.csv
[Tue May 28 20:40:23 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue May 28 20:40:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22.csv
[Tue May 28 20:40:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 20:40:24 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue May 28 20:40:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 28 20:40:24 2013] fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue May 28 20:40:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Tue May 28 20:40:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0675010301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:54:48 2013] Spatial fit model total counts = 1539.430000, observed total counts = 1716.000000
[Tue May 28 21:54:48 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 21:54:48 2013] Vigneting correction estimate = 1.000000
[Tue May 28 21:54:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 21:54:48 2013] Assessing source extent using major
[Tue May 28 21:54:48 2013] Source does appear to be extended
[Tue May 28 21:54:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 21:55:05 2013] Counts = 1361.159912, rescaling region sizes by 2.000000
[Tue May 28 21:55:05 2013] XMMSAS src. selection expression = ellipse(21590.497208, 28519.065643, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 28 21:55:05 2013] Writing source region out to fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_src.reg
[Tue May 28 21:55:05 2013] Extracting stamp from image fullrun_pn_xmm0675010301_pi300-10000_cl_sm2.00.img.gz, (174, 253) - (324, 403)
[Tue May 28 21:55:05 2013] XMMSAS bgd. selection expression = annulus(21590.497208, 28519.065643, 4350.000000, 8700.000000, X, Y) && !ellipse(24438.803345, 37353.248169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17707.796760, 36382.656800, 690.162420, 344.907210, 323.489091, X, Y) && !ellipse(27934.412262, 33367.470398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22000.574448, 32929.565796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14146.287567, 32132.417145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23797.119934, 31237.443939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26172.647400, 31206.441800, 471.580014, 304.808809, 19.035872, X, Y) && !ellipse(28645.838800, 29862.679480, 453.228813, 258.336807, 338.755397, X, Y) && !ellipse(19361.778000, 29693.600159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19687.542130, 28992.154694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14487.580963, 28342.362823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20204.829453, 28199.110718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.852800, 27185.852800, 344.528010, 273.165608, 327.680814, X, Y) && !ellipse(23784.609300, 27134.408600, 586.811217, 586.811217, 0.000000, X, Y) && !ellipse(19502.695007, 26572.565430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19381.901794, 26076.066986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23745.421800, 26168.191200, 1164.784034, 1164.784034, 0.000000, X, Y) && !ellipse(28041.542694, 25314.158539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.062683, 25074.847473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.761261, 25033.837891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.616241, 25041.001160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13317.489639, 24926.850830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22708.693329, 24654.943970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15967.765800, 24465.884800, 466.302413, 366.457611, 61.938600, X, Y) && !ellipse(28876.339661, 24021.584076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18662.327789, 24100.114532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.332000, 23733.447000, 1317.872038, 346.374410, 8.578330, X, Y) && !ellipse(16974.931885, 23624.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12625.400000, 23292.963000, 322.945356, 322.945356, 0.000000, X, Y) && !ellipse(27825.946350, 23157.648163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.823600, 22019.981200, 1787.136051, 336.028010, 245.423000, X, Y) && !ellipse(16394.182724, 21622.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.953400, 21859.946000, 1389.248040, 506.447215, 80.589170, X, Y) && !ellipse(24330.148926, 20720.055145, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 21:55:05 2013] Writing fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22.gif
[Tue May 28 22:12:30 2013] Mean detx,y = (3905.97, 266.94) 
[Tue May 28 22:12:36 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 22:15:27 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 22:15:28 2013] Setting source spectrum file to fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue May 28 22:15:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue May 28 23:07:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 23:07:20 2013] rmf not generated due to insufficient counts
[Wed May 29 01:49:54 2013] Updating aperture counts using extracted products
[Wed May 29 01:49:54 2013] Total counts from fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 2857.00
[Wed May 29 01:49:54 2013] Total counts from fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_bgd.pi.gz = 51871.00
[Wed May 29 01:49:54 2013] Got source and background scale factors 3950225.000000, 133239875.000000
[Wed May 29 01:49:54 2013] User source parameters:
  Position = (248.7, 328.4) = 21 37 10.08 -63 4 57.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1319.2 +/- 54.5
  Background aperture counts = 1537.8
  Rate = 0.02 +/- 0.0009

[Wed May 29 01:49:54 2013] Updating counts from extracted products
[Wed May 29 01:49:54 2013] Set source signif. to 1319.16/39.22 = 33.64
[Wed May 29 01:50:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 01:50:15 2013] Using photon index=1.80, rate=0.0216, arf fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22.arf
[Wed May 29 01:50:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 01:50:15 2013] Updating source flux to 6e-14
[Wed May 29 01:50:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 01:51:16 2013] xmm0675010301/analysis//spectral/fullrun_pn_xmm0675010301_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete